rockbox/firmware/target/arm/tcc77x/c100/button-c100.c
Marc Guay b93667b306 Add the Sansa c100 as a build target with basic drivers.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17742 a1c6a512-1295-4272-9138-f99709370657
2008-06-21 15:18:36 +00:00

62 lines
1.7 KiB
C

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id: button-logikdax.c 15396 2007-11-01 23:38:57Z dave $
*
* Copyright (C) 2007 by Dave Chapman
*
* All files in this archive are subject to the GNU General Public License.
* See the file COPYING in the source tree root for full license agreement.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "config.h"
#include "cpu.h"
#include "button.h"
#include "adc.h"
void button_init_device(void)
{
GPIOA_DIR |= 0xC;
}
int button_read_device(void)
{
int btn = BUTTON_NONE;
if (!button_hold()){
GPIOA |= 0x4;
GPIOA &= ~0x8;
int i=20; while (i--);
if (GPIOA & 0x10) btn |= BUTTON_PLAYPAUSE; /* up */
if (GPIOA & 0x20) btn |= BUTTON_RIGHT;
if (GPIOA & 0x40) btn |= BUTTON_LEFT;
GPIOA |= 0x8;
GPIOA &= ~0x4;
i=20; while (i--);
if (GPIOA & 0x10) btn |= BUTTON_VOLUP;
if (GPIOA & 0x20) btn |= BUTTON_VOLDOWN;
if (GPIOA & 0x40) btn |= BUTTON_REPEATAB; /* down */
if (GPIOA & 0x80) btn |= BUTTON_SELECT;
if (GPIOA & 0x100) btn |= BUTTON_MENU;
}
return btn;
}
bool button_hold(void)
{
return (GPIOA & 0x2);
}