rockbox/bootloader/gigabeat.c
Rafaël Carré 5d236b2bfd Generate C file / header for svn version string
It's now easier to force rebuild of files depending on the svn revision

version.c/version.h are generated once with new tools/genversion.sh
Changes in the VCS are still not auto detected, so you'll have to remove
builddir/version.* if you want to change the string in your binaries

APPSVERSION is now called RBVERSION and is defined in the generated
header instead of being defined by the Makefiles
appsversion is now called rbversion (the plugin api number didn't change
since old modules are still binary compatible)

Change some bootloaders to use knwon-at-buildtime RBVERSION instead of
"%s" + rbversion

You'll need to run make clean to regenerate dependencies after the
removal of apps/version.h

To build binaries with a different version string, hand-edit
tools/version.sh or tools/genversion.sh (which calls the former)

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26320 a1c6a512-1295-4272-9138-f99709370657
2010-05-27 09:41:46 +00:00

225 lines
5.4 KiB
C

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2006 by Greg White
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "config.h"
#include <stdlib.h>
#include <stdio.h>
#include "inttypes.h"
#include "string.h"
#include "cpu.h"
#include "system.h"
#include "lcd.h"
#include "kernel.h"
#include "thread.h"
#include "storage.h"
#include "fat.h"
#include "disk.h"
#include "font.h"
#include "adc.h"
#include "backlight.h"
#include "backlight-target.h"
#include "button.h"
#include "panic.h"
#include "power.h"
#include "file.h"
#include "common.h"
#include "rbunicode.h"
#include "usb.h"
#include "mmu-arm.h"
#include "rtc.h"
#include "version.h"
#include <stdarg.h>
void shutdown(void)
{
/* We need to gracefully spin down the disk to prevent clicks. */
if (ide_powered())
{
/* Make sure ATA has been initialized. */
ata_init();
/* And put the disk into sleep immediately. */
ata_sleepnow();
}
_backlight_off();
power_off();
}
void main(void)
{
unsigned char* loadbuffer;
int buffer_size;
int rc;
int(*kernel_entry)(void);
system_init();
kernel_init(); /* Need the kernel to sleep */
enable_interrupt(IRQ_FIQ_STATUS);
lcd_init();
backlight_init();
button_init();
font_init();
adc_init();
lcd_setfont(FONT_SYSFIXED);
/* These checks should only run if the bootloader is flashed */
if(GSTATUS3&0x02)
{
GSTATUS3&=0xFFFFFFFD;
if(!(GPGDAT&BUTTON_POWER) && charger_inserted())
{
while(!(GPGDAT&BUTTON_POWER) && charger_inserted())
{
char msg[20];
if(charging_state())
{
snprintf(msg,sizeof(msg),"Charging");
}
else
{
snprintf(msg,sizeof(msg),"Charge Complete");
}
reset_screen();
lcd_putsxy( (LCD_WIDTH - (SYSFONT_WIDTH * strlen(msg))) / 2,
(LCD_HEIGHT - SYSFONT_HEIGHT) / 2, msg);
lcd_update();
#if defined(HAVE_RTC_ALARM)
/* Check if the alarm went off while charging */
if(rtc_check_alarm_flag())
{
GSTATUS3=1; /* Normally this is set in crt0.s */
break;
}
#endif
}
if(!(GPGDAT&BUTTON_POWER)
#if defined(HAVE_RTC_ALARM)
&& !GSTATUS3
#endif
)
{
shutdown();
}
}
if(button_hold())
{
const char msg[] = "HOLD is enabled";
reset_screen();
lcd_putsxy( (LCD_WIDTH - (SYSFONT_WIDTH * strlen(msg))) / 2,
(LCD_HEIGHT - SYSFONT_HEIGHT) / 2, msg);
lcd_update();
sleep(2*HZ);
shutdown();
}
}
power_init();
usb_init();
/* Enter USB mode without USB thread */
if(usb_detect() == USB_INSERTED)
{
const char msg[] = "Bootloader USB mode";
reset_screen();
lcd_putsxy( (LCD_WIDTH - (SYSFONT_WIDTH * strlen(msg))) / 2,
(LCD_HEIGHT - SYSFONT_HEIGHT) / 2, msg);
lcd_update();
storage_enable(false);
sleep(HZ/20);
usb_enable(true);
while (usb_detect() == USB_INSERTED)
sleep(HZ);
usb_enable(false);
reset_screen();
lcd_update();
}
reset_screen();
/* Show debug messages if button is pressed */
if(button_read_device()&BUTTON_A)
verbose = true;
printf("Rockbox boot loader");
printf("Version " RBVERSION);
sleep(50); /* ATA seems to error without this pause */
rc = storage_init();
if(rc)
{
reset_screen();
error(EATA, rc);
}
disk_init();
rc = disk_mount_all();
if (rc<=0)
{
error(EDISK,rc);
}
printf("Loading firmware");
/* Flush out anything pending first */
cpucache_invalidate();
loadbuffer = (unsigned char*) 0x31000000;
buffer_size = (unsigned char*)0x31400000 - loadbuffer;
rc = load_firmware(loadbuffer, BOOTFILE, buffer_size);
if(rc < 0)
error(EBOOTFILE, rc);
storage_close();
system_prepare_fw_start();
if (rc == EOK)
{
cpucache_invalidate();
kernel_entry = (void*) loadbuffer;
rc = kernel_entry();
}
#if 0
/* Halt */
while (1)
core_idle();
#else
/* Return and restart */
#endif
}