..
archos /av300
as3525
as3525: bootloader USB mode
2010-06-18 01:47:39 +00:00
at91sam
imx31
Configure Gigabeat S with EABI compiler by default. Implement the INIT section that this enables (due to selective need for long calls). Remove pcm_postinit from INIT section since it's asynchronous. Disable strict aliasing on SPC codec for now just to shut it up.
2010-06-11 14:39:35 +00:00
ipod
FS#11335 by me: make ARM assembly functions thumb-friendly
2010-06-11 04:41:36 +00:00
iriver
FS#11335 by me: make ARM assembly functions thumb-friendly
2010-06-11 04:41:36 +00:00
olympus
FS#11335 by me: make ARM assembly functions thumb-friendly
2010-06-11 04:41:36 +00:00
pbell
FS#11335 by me: make ARM assembly functions thumb-friendly
2010-06-11 04:41:36 +00:00
philips
FS#11335 by me: make ARM assembly functions thumb-friendly
2010-06-11 04:41:36 +00:00
pnx0101
Make PCM->driver interface about as simple as it will get. Registered callback, zero data, alignment and stops are handled entirely inside pcm.c; driver merely calls fixed pcm.c callback. Remove pcm_record_more and do it just like playback; the original reason behind it isn't very practical in general. Everything checks out on supported targets. There wer some compat changes I can't check out on many unsupoorted but if there's a problem it will be a minor oops. Plugins become incompatible due to recording tweak-- full update. Sorted API.
2010-05-24 16:42:32 +00:00
s3c2440
Remove card_enable_monitoring() and use a mutex instead. The card_enable_monitoring() method actually didn't eliminate the possible race conditions it was meant to fix.
2010-06-06 13:20:47 +00:00
s5l8700
Remove an unneccessary long call from the S5L8700 PCM FIQ handler
2010-06-11 16:20:46 +00:00
samsung
FS#11335 by me: make ARM assembly functions thumb-friendly
2010-06-11 04:41:36 +00:00
sandisk
FS#11335 by me: make ARM assembly functions thumb-friendly
2010-06-11 04:41:36 +00:00
tatung
tcc77x
tcc780x
cowond2: make the code consistent with the comments and really clear the bits
2010-06-13 14:00:30 +00:00
tms320dm320
Make sure files which aren't windows-specific use \n line endings only
2010-06-17 16:59:51 +00:00
adc-as3514.c
adc-as3514.c: cosmetics
2010-05-15 19:44:54 +00:00
adc-pp5020.c
ascodec-pp.c
ascodec-target.h
as3514/as3543 fixes
2010-05-17 20:53:25 +00:00
ata-as-arm.S
FS#11335 by me: make ARM assembly functions thumb-friendly
2010-06-11 04:41:36 +00:00
ata-nand-telechips.c
ata-pp5002.c
ata-pp5020.c
ata-sd-pp.c
Remove card_enable_monitoring() and use a mutex instead. The card_enable_monitoring() method actually didn't eliminate the possible race conditions it was meant to fix.
2010-06-06 13:20:47 +00:00
ata-target.h
audio-pp.c
crt0-pp-bl.S
crt0-pp.S
ARM: use BX when branch to an address in register
2010-05-31 15:14:26 +00:00
crt0.S
Sansa AMS: call the exception handler with the correct address when the exception happened in Thumb state
2010-06-12 16:55:51 +00:00
ffs-arm.S
i2c-pp.c
i2c-telechips.c
Re-write the Telechips I2C delay routine in assembler to stop the compiler optimising it away. Tested with EABI and non-EABI compilers.
2010-06-16 21:03:57 +00:00
i2s-pp.c
kernel-pp.c
lcd-as-memframe.S
FS#11335 by me: make ARM assembly functions thumb-friendly
2010-06-11 04:41:36 +00:00
lcd-c200_c200v2.c
Apply FS#9194 - LCD invert for Sansa c200/c200v2
2010-05-28 19:36:52 +00:00
lcd-ssd1815.c
memcpy-arm.S
FS#11335 by me: make ARM assembly functions thumb-friendly
2010-06-11 04:41:36 +00:00
memmove-arm.S
FS#11335 by me: make ARM assembly functions thumb-friendly
2010-06-11 04:41:36 +00:00
memset-arm.S
FS#11335 by me: make ARM assembly functions thumb-friendly
2010-06-11 04:41:36 +00:00
memset16-arm.S
FS#11335 by me: make ARM assembly functions thumb-friendly
2010-06-11 04:41:36 +00:00
mmu-arm.h
mmu-arm.S
Update Samsung YP-S3 bootloader demo
2010-05-30 21:43:14 +00:00
mmu-armv6.S
pcm-pp.c
pcm-pp: revert r26756
2010-06-11 11:25:16 +00:00
pcm-telechips.c
Make PCM->driver interface about as simple as it will get. Registered callback, zero data, alignment and stops are handled entirely inside pcm.c; driver merely calls fixed pcm.c callback. Remove pcm_record_more and do it just like playback; the original reason behind it isn't very practical in general. Everything checks out on supported targets. There wer some compat changes I can't check out on many unsupoorted but if there's a problem it will be a minor oops. Plugins become incompatible due to recording tweak-- full update. Sorted API.
2010-05-24 16:42:32 +00:00
powermgmt-ascodec.c
as3525v2: fix end of charge detection
2010-05-19 14:06:08 +00:00
sd-pp-target.h
support-arm.S
ARM: __div0() takes no argument
2010-06-12 17:15:39 +00:00
system-arm.c
__div0: give the address of the instruction calling division to UIE
2010-06-12 17:15:44 +00:00
system-arm.h
system-pp502x.c
system-pp5002.c
system-target.h
thread-arm.c
FS#11335 by me: make ARM assembly functions thumb-friendly
2010-06-11 04:41:36 +00:00
thread-pp.c
Clean unused stuff out of thread.h and config.h and reorganize thread-pp.c to simplify the preprocessor blocks.
2010-06-10 17:31:45 +00:00
timer-pp.c
usb-drv-arc.c
usb-fw-pp502x.c
usb-fw-pp5002.c
usb-s3c6400x.c
usb-target.h
usb-tcc.c
wmcodec-pp.c
wmcodec-telechips.c
b812465bff