rockbox/firmware/export/config-m200.h
Rafaël Carré 47b2b579cc LCD_DEPTH == 1 : specify if lcd framebuffer is in iram into the model specific config file
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22397 a1c6a512-1295-4272-9138-f99709370657
2009-08-18 04:10:06 +00:00

139 lines
3.7 KiB
C

/*
* This config file is for the Sansa M200 series
*/
#define TARGET_TREE /* this target is using the target tree system */
/* For Rolo and boot loader */
#define MODEL_NUMBER 29
#define MODEL_NAME "Sandisk Sansa m200 series"
/* Enable FAT16 support */
#define HAVE_FAT16SUPPORT
/* define this if you have recording possibility */
//#define HAVE_RECORDING
/* Define bitmask of input sources - recordable bitmask can be defined
explicitly if different */
//#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_SPDIF)
/* define this if you have a bitmap LCD display */
#define HAVE_LCD_BITMAP
/* define this if you can flip your LCD */
#define HAVE_LCD_FLIP
/* define this if you can invert the colours on your LCD */
#define HAVE_LCD_INVERT
/* define this if you have access to the quickscreen */
#define HAVE_QUICKSCREEN
/* define this if you have access to the pitchscreen */
#define HAVE_PITCHSCREEN
/* define this if you would like tagcache to build on this target */
#define HAVE_TAGCACHE
/* define this if you have a flash memory storage */
#define HAVE_FLASH_STORAGE
#define CONFIG_STORAGE STORAGE_NAND
#define CONFIG_NAND NAND_TCC
/* LCD dimensions */
#define LCD_WIDTH 128
#define LCD_HEIGHT 64
#define LCD_DEPTH 1
#define LCD_PIXELFORMAT VERTICAL_PACKING
/* Display colours, for screenshots and sim (0xRRGGBB) */
#define LCD_BARKCOLOR 0x000000
#define LCD_BRIGHTCOLOR 0x5e6854
#define LCD_BL_DARKCOLOR 0x000000
#define LCD_BL_BRIGHTCOLOR 0x3ca0e6
/* define this to indicate your device's keypad */
#define CONFIG_KEYPAD SANSA_M200_PAD
/* define this if you have a real-time clock */
#define CONFIG_RTC RTC_TCC77X
/* define this if you have RTC RAM available for settings */
//#define HAVE_RTC_RAM
/* Define this if you have a software controlled poweroff */
#define HAVE_SW_POWEROFF
/* The number of bytes reserved for loadable codecs */
#define CODEC_SIZE 0x38000
/* The number of bytes reserved for loadable plugins */
#define PLUGIN_BUFFER_SIZE 0x10000
#define AB_REPEAT_ENABLE 1
/* Define this if you do software codec */
#define CONFIG_CODEC SWCODEC
/* Define this if you have the TLV320 audio codec */
#define HAVE_TLV320
/* TLV320 has no tone controls, so we use the software ones */
#define HAVE_SW_TONE_CONTROLS
/* Define this for LCD backlight available */
#define HAVE_BACKLIGHT
#define CONFIG_I2C I2C_TCC77X
#define BATTERY_CAPACITY_DEFAULT 1500 /* default battery capacity */
#define BATTERY_CAPACITY_MIN 1500 /* min. capacity selectable */
#define BATTERY_CAPACITY_MAX 3200 /* max. capacity selectable */
#define BATTERY_CAPACITY_INC 50 /* capacity increment */
#define BATTERY_TYPES_COUNT 1 /* only one type */
/* define this if the unit should not shut down on low battery. */
#define NO_LOW_BATTERY_SHUTDOWN
#ifndef SIMULATOR
/* Define this if you have a TCC770 */
#define CONFIG_CPU TCC770
/* Define this if you have ATA power-off control */
#define HAVE_ATA_POWER_OFF
/* Define this to the CPU frequency */
#define CPU_FREQ 120000000
/* Offset ( in the firmware file's header ) to the file CRC */
#define FIRMWARE_OFFSET_FILE_CRC 0
/* Offset ( in the firmware file's header ) to the real data */
#define FIRMWARE_OFFSET_FILE_DATA 8
/* Software controlled LED */
#define CONFIG_LED LED_VIRTUAL
#define CONFIG_LCD LCD_SSD1815
#define BOOTFILE_EXT "m200"
#define BOOTFILE "rockbox." BOOTFILE_EXT
#define BOOTDIR "/"
#define IBSS_ATTR_VOICE_STACK
#define ICODE_ATTR_TREMOR_NOT_MDCT
#define ICODE_ATTR_TREMOR_MDCT
#define ICODE_ATTR_FLAC
#define IBSS_ATTR_FLAC_DECODED0
#define ICONST_ATTR_MPA_HUFFMAN
#define IBSS_ATTR_MPC_SAMPLE_BUF
#define ICODE_ATTR_ALAC
#define IBSS_ATTR_SHORTEN_DECODED0
#define IRAM_LCDFRAMEBUFFER IBSS_ATTR /* put the lcd frame buffer in IRAM */
#endif /* SIMULATOR */