rockbox/firmware/target/arm/as3525/sansa-fuzev2/button-fuzev2.c
Thomas Martitz b5b2a03ee2 A tiny bit more Sansa Fuze v2 work.
- buttonlight works
 - backlight turns on (quite weak though and no brightness adjustment/backlight off functional)
 - don't share drivers with e200v2/fuzev1 for now as it's not entirely clear how dbop plays into this
 - deactivte scrollwheel as it's messing up the timer setup in kernel-as3525.c indicating the dbop input reading doesn't work well
 - still no working bootloader/no lcd or buttons

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25225 a1c6a512-1295-4272-9138-f99709370657
2010-03-16 22:38:57 +00:00

37 lines
1.1 KiB
C

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2010 by Thomas Martitz
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "config.h"
#include "system.h"
#include "button.h"
void button_init_device(void)
{
}
/*
* Get button pressed from hardware
*/
int button_read_device(void)
{
return 0;
}