rockbox/firmware/target/arm/imx233/regs/apbx.h
Amaury Pouly eac1ca22bd imx233: generate register headers using headergen_v2 and update code for it
NOTE: this commit does not introduce any change, ideally even the binary should
be almost the same. I checked the disassembly by hand and there are only a few
differences here and there, mostly the compiler decides to compile very close
expressions slightly differently. I tried to run the new code on several targets
to make sure and saw no difference.

The major syntax changes of the new headers are as follows:
- BF_{WR,SET,CLR} are now superpowerful and allows to set several fileds at once:
  BF_WR(reg, field1(value1), field2(value2), ...)
- BF_CS (use like BF_WR) does a write to reg_CLR and then reg_SET instead of RMW
- there is no more need for macros like BF_{WR_,SET,CLR}_V, since one can simply
  BF_WR with field_V(name)
- the old BF_SETV macro has no trivial equivalent and is replaced with its
  its equivalent for BF_WR(reg_SET, ...)

I also rename the register headers: "regs/regs-x.h" -> "regs/x.h" to avoid the
redundant "regs".

Final note: the registers were generated using the following command:
./headergen_v2 -g imx -o ../../firmware/target/arm/imx233/regs/ desc/regs-stmp3{600,700,780}.xml

Change-Id: I7485e8b4315a0929a8edb63e7fa1edcaa54b1edc
2016-05-28 16:49:22 +02:00

37 lines
1.4 KiB
C

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* This file was automatically generated by headergen, DO NOT EDIT it.
* headergen version: 3.0.0
*
* Copyright (C) 2015 by the authors
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#ifndef __HEADERGEN_APBX_H__
#define __HEADERGEN_APBX_H__
#include "macro.h"
#define STMP3600_INCLUDE "stmp3600/apbx.h"
#define STMP3700_INCLUDE "stmp3700/apbx.h"
#define IMX233_INCLUDE "imx233/apbx.h"
#include "select.h"
#undef STMP3600_INCLUDE
#undef STMP3700_INCLUDE
#undef IMX233_INCLUDE
#endif /* __HEADERGEN_APBX_H__*/