Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware/export/config/ipod3g.h
Torne Wuff bad4142ce2 Add LBA48 support to all targets with ATA, except archoses whose USB bridge chip can't handle it. 
The cost of LBA48 support is very small and it means that upgraded drives/CF cards which are over 128GiB will just work with no custom build required. There should be no runtime effect on disks which do not require it.


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25553 a1c6a512-1295-4272-9138-f99709370657
2010-04-09 12:10:17 +00:00

187 lines
5.3 KiB
C
Raw Blame History

/*
* This config file is for the Apple iPod 3g
*/
#define TARGET_TREE /* this target is using the target tree system */
#define IPOD_ARCH 1
#define MODEL_NAME "Apple iPod 3g"
/* For Rolo and boot loader */
#define MODEL_NUMBER 7
/* define this if you use an ATA controller */
#define CONFIG_STORAGE STORAGE_ATA
/*define this if the ATA controller and method of USB access support LBA48 */
#define HAVE_LBA48
/* define this if you have recording possibility */
/*#define HAVE_RECORDING*/
/* define the bitmask of hardware sample rates */
#define HW_SAMPR_CAPS (SAMPR_CAP_96 | SAMPR_CAP_88 | SAMPR_CAP_48 | \
SAMPR_CAP_44 | SAMPR_CAP_32 | SAMPR_CAP_8)
/* define the bitmask of recording sample rates
#define REC_SAMPR_CAPS (SAMPR_CAP_96 | SAMPR_CAP_88 | SAMPR_CAP_48 | \
SAMPR_CAP_44 | SAMPR_CAP_32 | SAMPR_CAP_8) */
/* define this if you have a bitmap LCD display */
#define HAVE_LCD_BITMAP
/* define this if you want album art for this target */
#define HAVE_ALBUMART
/* define this to enable bitmap scaling */
#define HAVE_BMP_SCALING
/* define this to enable JPEG decoding */
#define HAVE_JPEG
/* define this if you can invert the colours on your LCD */
#define HAVE_LCD_INVERT
/* define this if the LCD needs to be shutdown */
#define HAVE_LCD_SHUTDOWN
/* define this if you have access to the quickscreen */
#define HAVE_QUICKSCREEN
/* define this if you have access to the pitchscreen */
#define HAVE_PITCHSCREEN
/* define this if you would like tagcache to build on this target */
#define HAVE_TAGCACHE
/* LCD dimensions */
#define LCD_WIDTH 160
#define LCD_HEIGHT 128
#define LCD_DEPTH 2 /* 4 colours - 2bpp */
#define LCD_PIXELFORMAT HORIZONTAL_PACKING
/* Display colours, for screenshots and sim (0xRRGGBB) */
#define LCD_DARKCOLOR 0x000000
#define LCD_BRIGHTCOLOR 0x5a915a
#define LCD_BL_DARKCOLOR 0x000000
#define LCD_BL_BRIGHTCOLOR 0xadd8e6
/* define this if you can flip your LCD */
#define HAVE_LCD_FLIP
#define HAVE_LCD_CONTRAST
/* LCD contrast */
#define MIN_CONTRAST_SETTING 5
#define MAX_CONTRAST_SETTING 63
#define DEFAULT_CONTRAST_SETTING 40 /* Match boot contrast */
#define CONFIG_KEYPAD IPOD_3G_PAD
#define HAVE_SCROLLWHEEL
/* Define this to enable morse code input */
#define HAVE_MORSE_INPUT
/* Define this if you do software codec */
#define CONFIG_CODEC SWCODEC
/* define this if you have a real-time clock */
#define CONFIG_RTC RTC_PCF50605
/* Define if the device can wake from an RTC alarm */
#define HAVE_RTC_ALARM
/* Define this if you can switch on/off the accessory power supply */
#define HAVE_ACCESSORY_SUPPLY
/* Define this if you have a software controlled poweroff */
#define HAVE_SW_POWEROFF
/* The number of bytes reserved for loadable codecs */
#define CODEC_SIZE 0x100000
/* The number of bytes reserved for loadable plugins */
#define PLUGIN_BUFFER_SIZE 0x80000
/* Define this if you have the WM8731L audio codec */
#define HAVE_WM8731
/* WM8731 has no tone controls, so we use the software ones */
#define HAVE_SW_TONE_CONTROLS
/* define this if you have a disk storage, i.e. something
that needs spinups and can cause skips when shaked */
#define HAVE_DISK_STORAGE
/* Define this for LCD backlight available */
#define HAVE_BACKLIGHT
/* Define this if you can detect headphones */
#define HAVE_HEADPHONE_DETECTION
#define BATTERY_CAPACITY_DEFAULT 630 /* default battery capacity */
#define BATTERY_CAPACITY_MIN 630 /* min. capacity selectable */
#define BATTERY_CAPACITY_MAX 1200 /* max. capacity selectable */
#define BATTERY_CAPACITY_INC 10 /* capacity increment */
#define BATTERY_TYPES_COUNT 1 /* only one type */
/* Hardware controlled charging? FIXME */
#define CONFIG_CHARGING CHARGING_SIMPLE
/* define current usage levels */
#define CURRENT_NORMAL 275 /* ~4h (1100mAh) */
#define CURRENT_BACKLIGHT 20 /* FIXME: this needs adjusting */
#if defined(HAVE_RECORDING)
#define CURRENT_RECORD 35 /* FIXME: this needs adjusting */
#endif
/* Define this if you have a PortalPlayer PP5002 */
#define CONFIG_CPU PP5002
/* We're able to shut off power to the HDD */
#define HAVE_ATA_POWER_OFF
/* Define this if you want to use the PP5002 i2c interface */
#define CONFIG_I2C I2C_PP5002
/* define this if the hardware can be powered off while charging */
//#define HAVE_POWEROFF_WHILE_CHARGING
/* The start address index for ROM builds */
#define ROM_START 0x00000000
/* The size of the flash ROM */
#define FLASH_SIZE 0x100000
/* Define this to the CPU frequency */
#define CPU_FREQ 11289600
#define CONFIG_LCD LCD_IPOD2BPP
/* Offset ( in the firmware file's header ) to the file length */
#define FIRMWARE_OFFSET_FILE_LENGTH 0
/* Offset ( in the firmware file's header ) to the file CRC */
#define FIRMWARE_OFFSET_FILE_CRC 0
/* Offset ( in the firmware file's header ) to the real data */
#define FIRMWARE_OFFSET_FILE_DATA 8
#define USB_HANDLED_BY_OF
/* actually both firewire and USB, USB isn't handled yet */
/* Define this if you have adjustable CPU frequency */
#define HAVE_ADJUSTABLE_CPU_FREQ
#define BOOTFILE_EXT "ipod"
#define BOOTFILE "rockbox." BOOTFILE_EXT
#define BOOTDIR "/.rockbox"
#define ICODE_ATTR_TREMOR_NOT_MDCT
#define IRAM_LCDFRAMEBUFFER IBSS_ATTR /* put the lcd frame buffer in IRAM */
/* Define this if a programmable hotkey is mapped */
#define HAVE_HOTKEY
Reference in a new issue View git blame Copy permalink