bad4142ce2
The cost of LBA48 support is very small and it means that upgraded drives/CF cards which are over 128GiB will just work with no custom build required. There should be no runtime effect on disks which do not require it. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25553 a1c6a512-1295-4272-9138-f99709370657
193 lines
5.4 KiB
C
193 lines
5.4 KiB
C
/*
|
|
* This config file is for toshiba Gigabeat F
|
|
*/
|
|
#define TARGET_TREE /* this target is using the target tree system */
|
|
|
|
#define TOSHIBA_GIGABEAT_F 1
|
|
|
|
#define MODEL_NAME "Toshiba Gigabeat F"
|
|
|
|
/* For Rolo and boot loader */
|
|
#define MODEL_NUMBER 18
|
|
|
|
/* define this if you use an ATA controller */
|
|
#define CONFIG_STORAGE STORAGE_ATA
|
|
|
|
/*define this if the ATA controller and method of USB access support LBA48 */
|
|
#define HAVE_LBA48
|
|
|
|
/* define this if you have a bitmap LCD display */
|
|
#define HAVE_LCD_BITMAP
|
|
|
|
/* define this if you have a colour LCD */
|
|
#define HAVE_LCD_COLOR
|
|
|
|
/* define this if you want album art for this target */
|
|
#define HAVE_ALBUMART
|
|
|
|
/* define this to enable bitmap scaling */
|
|
#define HAVE_BMP_SCALING
|
|
|
|
/* define this to enable JPEG decoding */
|
|
#define HAVE_JPEG
|
|
|
|
/* define this if you have access to the quickscreen */
|
|
#define HAVE_QUICKSCREEN
|
|
|
|
/* define this if you have access to the pitchscreen */
|
|
#define HAVE_PITCHSCREEN
|
|
|
|
/* define this if you would like tagcache to build on this target */
|
|
#define HAVE_TAGCACHE
|
|
|
|
/* define this if the target has volume keys which can be used in the lists */
|
|
#define HAVE_VOLUME_IN_LIST
|
|
|
|
/* LCD dimensions */
|
|
#define LCD_WIDTH 240
|
|
#define LCD_HEIGHT 320
|
|
#define LCD_DEPTH 16 /* 65k colours */
|
|
#define LCD_PIXELFORMAT RGB565 /* rgb565 */
|
|
|
|
#ifndef BOOTLOADER
|
|
/* Define this if your LCD can be enabled/disabled */
|
|
#define HAVE_LCD_ENABLE
|
|
|
|
/* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
|
|
should be defined as well. */
|
|
#define HAVE_LCD_SLEEP
|
|
/* We don't use a setting but a fixed delay after the backlight has
|
|
* turned off */
|
|
#define LCD_SLEEP_TIMEOUT (5*HZ)
|
|
|
|
#define HAVE_TOUCHPAD_SENSITIVITY_SETTING
|
|
|
|
#define HAVE_HARDWARE_BEEP
|
|
|
|
#endif /* BOOTLOADER */
|
|
|
|
#define CONFIG_KEYPAD GIGABEAT_PAD
|
|
|
|
/* Define this to enable morse code input */
|
|
#define HAVE_MORSE_INPUT
|
|
|
|
/* Define this if you do software codec */
|
|
#define CONFIG_CODEC SWCODEC
|
|
|
|
/* define this if you have a real-time clock */
|
|
#define CONFIG_RTC RTC_S3C2440
|
|
|
|
/* define this if you have a disk storage, i.e. something
|
|
that needs spinups and can cause skips when shaked */
|
|
#define HAVE_DISK_STORAGE
|
|
|
|
/* Define this for LCD backlight available */
|
|
#define HAVE_BACKLIGHT
|
|
|
|
#define HAVE_BUTTON_LIGHT
|
|
|
|
#define HAVE_BACKLIGHT_BRIGHTNESS
|
|
|
|
#define HAVE_BUTTONLIGHT_BRIGHTNESS
|
|
|
|
/* Main LCD backlight brightness range and defaults */
|
|
#define MIN_BRIGHTNESS_SETTING 1 /* 0.5 mA */
|
|
#define MAX_BRIGHTNESS_SETTING 12 /* 32 mA */
|
|
#define DEFAULT_BRIGHTNESS_SETTING 10 /* 16 mA */
|
|
|
|
/* Define this if you have a software controlled poweroff */
|
|
#define HAVE_SW_POWEROFF
|
|
|
|
/* The number of bytes reserved for loadable codecs */
|
|
#define CODEC_SIZE 0x100000
|
|
|
|
/* The number of bytes reserved for loadable plugins */
|
|
#define PLUGIN_BUFFER_SIZE 0x80000
|
|
|
|
#define AB_REPEAT_ENABLE 1
|
|
|
|
/* Define this if you have the WM8975 audio codec */
|
|
#define HAVE_WM8751
|
|
|
|
/* Define this if you want to use the adaptive bass capibility of the 8751 */
|
|
/* #define USE_ADAPTIVE_BASS */
|
|
|
|
#define HW_SAMPR_CAPS (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | \
|
|
SAMPR_CAP_11)
|
|
|
|
/* All exact rates for 16.9344MHz clock */
|
|
#define CODEC_SRCTRL_11025HZ (0x19 << 1)
|
|
#define CODEC_SRCTRL_22050HZ (0x1b << 1)
|
|
#define CODEC_SRCTRL_44100HZ (0x11 << 1)
|
|
#define CODEC_SRCTRL_88200HZ (0x1f << 1)
|
|
|
|
#define HAVE_HEADPHONE_DETECTION
|
|
|
|
#define BATTERY_CAPACITY_DEFAULT 830 /* default battery capacity */
|
|
#define BATTERY_CAPACITY_MIN 830 /* min. capacity selectable */
|
|
#define BATTERY_CAPACITY_MAX 830 /* max. capacity selectable */
|
|
#define BATTERY_CAPACITY_INC 25 /* capacity increment */
|
|
#define BATTERY_TYPES_COUNT 1 /* only one type */
|
|
|
|
/* Hardware controlled charging with monitoring */
|
|
#define CONFIG_CHARGING CHARGING_MONITOR
|
|
|
|
/* define current usage levels */
|
|
#define CURRENT_NORMAL 46 /* 18 hours from an 830 mah battery*/
|
|
#define CURRENT_BACKLIGHT 30 /* seems reasonable */
|
|
#define CURRENT_RECORD 0 /* no recording on the gigabeat F/X */
|
|
|
|
/* define this if the unit can be powered or charged via USB */
|
|
#define HAVE_USB_POWER
|
|
|
|
/* define this if the unit has a battery switch or battery can be removed
|
|
* when running */
|
|
#define HAVE_BATTERY_SWITCH
|
|
|
|
#define HAVE_LCD_FLIP
|
|
|
|
/* Define this if your LCD can set contrast */
|
|
#define HAVE_LCD_CONTRAST
|
|
|
|
#define MIN_CONTRAST_SETTING 0
|
|
#define MAX_CONTRAST_SETTING 63
|
|
#define DEFAULT_CONTRAST_SETTING 47 /* Match boot contrast */
|
|
|
|
/* LCD invert - does not currently work */
|
|
/* #define HAVE_LCD_INVERT */
|
|
|
|
/* Define this if you have a Motorola SCF5249 */
|
|
#define CONFIG_CPU S3C2440
|
|
|
|
/* Define this if you want to use coldfire's i2c interface */
|
|
#define CONFIG_I2C I2C_S3C2440
|
|
|
|
/* define this if the hardware can be powered off while charging */
|
|
#define HAVE_POWEROFF_WHILE_CHARGING
|
|
|
|
/* The size of the flash ROM */
|
|
#define FLASH_SIZE 0x400000
|
|
|
|
/* Define this to the CPU frequency */
|
|
#define CPU_FREQ 16934400
|
|
|
|
/* Define this if you have ATA power-off control */
|
|
#define HAVE_ATA_POWER_OFF
|
|
|
|
#define CONFIG_LCD LCD_GIGABEAT
|
|
|
|
/* Offset ( in the firmware file's header ) to the file CRC */
|
|
#define FIRMWARE_OFFSET_FILE_CRC 0
|
|
|
|
/* Offset ( in the firmware file's header ) to the real data */
|
|
#define FIRMWARE_OFFSET_FILE_DATA 8
|
|
|
|
/* Define this if you have adjustable CPU frequency */
|
|
/* #define HAVE_ADJUSTABLE_CPU_FREQ */
|
|
|
|
#define BOOTFILE_EXT "gigabeat"
|
|
#define BOOTFILE "rockbox." BOOTFILE_EXT
|
|
#define BOOTDIR "/.rockbox"
|
|
|
|
/* Define this if a programmable hotkey is mapped */
|
|
#define HAVE_HOTKEY
|