rockbox/firmware/target/arm/imx31/gigabeat-s/system-imx31.c
Michael Sevakis ba71cc540c imx31: Rename clkctl-imx31.* to ccm-imx31.* and move up from ...imx31/gigabeat-s to .../imx31. A bunch more should probably go up a level too.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20443 a1c6a512-1295-4272-9138-f99709370657
2009-03-22 02:13:27 +00:00

305 lines
8.1 KiB
C

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2007 by James Espinoza
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "kernel.h"
#include "system.h"
#include "panic.h"
#include "avic-imx31.h"
#include "gpio-imx31.h"
#include "mmu-imx31.h"
#include "system-target.h"
#include "lcd.h"
#include "serial-imx31.h"
#include "debug.h"
#include "ccm-imx31.h"
#include "mc13783.h"
static unsigned long product_rev;
static unsigned long system_rev;
/** IC revision info routines **/
unsigned int iim_system_rev(void)
{
return system_rev & IIM_SREV_SREV;
}
unsigned int iim_prod_rev(void)
{
return product_rev;
}
static void iim_init(void)
{
/* Initialize the IC revision info (required by SDMA) */
ccm_module_clock_gating(CG_IIM, CGM_ON_RUN_WAIT);
product_rev = IIM_PREV;
system_rev = IIM_SREV;
}
/** Watchdog timer routines **/
/* Initialize the watchdog timer */
void watchdog_init(unsigned int half_seconds)
{
uint16_t wcr = ((half_seconds << WDOG_WCR_WT_POS) & WDOG_WCR_WT) |
WDOG_WCR_WOE | /* WDOG output enabled */
WDOG_WCR_WDA | /* WDOG assertion - no effect */
WDOG_WCR_SRS | /* System reset - no effect */
WDOG_WCR_WRE; /* Generate a WDOG signal */
ccm_module_clock_gating(CG_WDOG, CGM_ON_RUN_WAIT);
WDOG_WCR = wcr;
WDOG_WSR = 0x5555;
WDOG_WCR = wcr | WDOG_WCR_WDE; /* Enable timer - hardware does
not allow a disable now */
WDOG_WSR = 0xaaaa;
}
/* Service the watchdog timer */
void watchdog_service(void)
{
WDOG_WSR = 0x5555;
WDOG_WSR = 0xaaaa;
}
/** GPT timer routines - basis for udelay **/
/* Start the general-purpose timer (1MHz) */
void gpt_start(void)
{
ccm_module_clock_gating(CG_GPT, CGM_ON_RUN_WAIT);
unsigned int ipg_mhz = ccm_get_ipg_clk() / 1000000;
GPTCR &= ~GPTCR_EN; /* Disable counter */
GPTCR |= GPTCR_SWR; /* Reset module */
while (GPTCR & GPTCR_SWR);
/* No output
* No capture
* Enable in run mode only (doesn't tick while in WFI)
* Freerun mode (count to 0xFFFFFFFF and roll-over to 0x00000000)
*/
GPTCR = GPTCR_FRR | GPTCR_CLKSRC_IPG_CLK;
GPTPR = ipg_mhz - 1;
GPTCR |= GPTCR_EN;
}
/* Stop the general-purpose timer */
void gpt_stop(void)
{
GPTCR &= ~GPTCR_EN;
}
int system_memory_guard(int newmode)
{
(void)newmode;
return 0;
}
void system_reboot(void)
{
/* Multi-context so no SPI available (WDT?) */
while (1);
}
void system_exception_wait(void)
{
/* Called in many contexts so button reading may be a chore */
avic_disable_int(INT_ALL);
core_idle();
while (1);
}
void system_init(void)
{
static const int disable_clocks[] =
{
/* CGR0 */
CG_SD_MMC1,
CG_SD_MMC2,
CG_IIM,
CG_SDMA,
CG_CSPI3,
CG_RNG,
CG_UART1,
CG_UART2,
CG_SSI1,
CG_I2C1,
CG_I2C2,
CG_I2C3,
/* CGR1 */
CG_HANTRO,
CG_MEMSTICK1,
CG_MEMSTICK2,
CG_CSI,
CG_RTC,
CG_WDOG,
CG_PWM,
CG_SIM,
CG_ECT,
CG_USBOTG,
CG_KPP,
CG_UART3,
CG_UART4,
CG_UART5,
CG_1_WIRE,
/* CGR2 */
CG_SSI2,
CG_CSPI1,
CG_CSPI2,
CG_GACC,
CG_RTIC,
CG_FIR
};
unsigned int i;
/* MCR WFI enables wait mode (CCM_CCMR_LPM_WAIT_MODE = 0) */
imx31_regclr32(&CCM_CCMR, CCM_CCMR_LPM);
iim_init();
imx31_regset32(&SDHC1_CLOCK_CONTROL, STOP_CLK);
imx31_regset32(&SDHC2_CLOCK_CONTROL, STOP_CLK);
imx31_regset32(&RNGA_CONTROL, RNGA_CONTROL_SLEEP);
imx31_regclr32(&UCR1_1, EUARTUCR1_UARTEN);
imx31_regclr32(&UCR1_2, EUARTUCR1_UARTEN);
imx31_regclr32(&UCR1_3, EUARTUCR1_UARTEN);
imx31_regclr32(&UCR1_4, EUARTUCR1_UARTEN);
imx31_regclr32(&UCR1_5, EUARTUCR1_UARTEN);
for (i = 0; i < ARRAYLEN(disable_clocks); i++)
ccm_module_clock_gating(disable_clocks[i], CGM_OFF);
avic_init();
gpt_start();
gpio_init();
}
void __attribute__((naked)) imx31_regmod32(volatile uint32_t *reg_p,
uint32_t value,
uint32_t mask)
{
asm volatile("and r1, r1, r2 \n"
"mrs ip, cpsr \n"
"cpsid if \n"
"ldr r3, [r0] \n"
"bic r3, r3, r2 \n"
"orr r3, r3, r1 \n"
"str r3, [r0] \n"
"msr cpsr_c, ip \n"
"bx lr \n");
(void)reg_p; (void)value; (void)mask;
}
void __attribute__((naked)) imx31_regset32(volatile uint32_t *reg_p,
uint32_t mask)
{
asm volatile("mrs r3, cpsr \n"
"cpsid if \n"
"ldr r2, [r0] \n"
"orr r2, r2, r1 \n"
"str r2, [r0] \n"
"msr cpsr_c, r3 \n"
"bx lr \n");
(void)reg_p; (void)mask;
}
void __attribute__((naked)) imx31_regclr32(volatile uint32_t *reg_p,
uint32_t mask)
{
asm volatile("mrs r3, cpsr \n"
"cpsid if \n"
"ldr r2, [r0] \n"
"bic r2, r2, r1 \n"
"str r2, [r0] \n"
"msr cpsr_c, r3 \n"
"bx lr \n");
(void)reg_p; (void)mask;
}
#ifdef BOOTLOADER
void system_prepare_fw_start(void)
{
disable_interrupt(IRQ_FIQ_STATUS);
avic_disable_int(INT_ALL);
mc13783_close();
tick_stop();
}
#endif
inline void dumpregs(void)
{
asm volatile ("mov %0,r0\n\t"
"mov %1,r1\n\t"
"mov %2,r2\n\t"
"mov %3,r3":
"=r"(regs.r0),"=r"(regs.r1),
"=r"(regs.r2),"=r"(regs.r3):);
asm volatile ("mov %0,r4\n\t"
"mov %1,r5\n\t"
"mov %2,r6\n\t"
"mov %3,r7":
"=r"(regs.r4),"=r"(regs.r5),
"=r"(regs.r6),"=r"(regs.r7):);
asm volatile ("mov %0,r8\n\t"
"mov %1,r9\n\t"
"mov %2,r10\n\t"
"mov %3,r12":
"=r"(regs.r8),"=r"(regs.r9),
"=r"(regs.r10),"=r"(regs.r11):);
asm volatile ("mov %0,r12\n\t"
"mov %1,sp\n\t"
"mov %2,lr\n\t"
"mov %3,pc\n"
"sub %3,%3,#8":
"=r"(regs.r12),"=r"(regs.sp),
"=r"(regs.lr),"=r"(regs.pc):);
#ifdef HAVE_SERIAL
dprintf("Register Dump :\n");
dprintf("R0=0x%x\tR1=0x%x\tR2=0x%x\tR3=0x%x\n",regs.r0,regs.r1,regs.r2,regs.r3);
dprintf("R4=0x%x\tR5=0x%x\tR6=0x%x\tR7=0x%x\n",regs.r4,regs.r5,regs.r6,regs.r7);
dprintf("R8=0x%x\tR9=0x%x\tR10=0x%x\tR11=0x%x\n",regs.r8,regs.r9,regs.r10,regs.r11);
dprintf("R12=0x%x\tSP=0x%x\tLR=0x%x\tPC=0x%x\n",regs.r12,regs.sp,regs.lr,regs.pc);
//dprintf("CPSR=0x%x\t\n",regs.cpsr);
#endif
DEBUGF("Register Dump :\n");
DEBUGF("R0=0x%x\tR1=0x%x\tR2=0x%x\tR3=0x%x\n",regs.r0,regs.r1,regs.r2,regs.r3);
DEBUGF("R4=0x%x\tR5=0x%x\tR6=0x%x\tR7=0x%x\n",regs.r4,regs.r5,regs.r6,regs.r7);
DEBUGF("R8=0x%x\tR9=0x%x\tR10=0x%x\tR11=0x%x\n",regs.r8,regs.r9,regs.r10,regs.r11);
DEBUGF("R12=0x%x\tSP=0x%x\tLR=0x%x\tPC=0x%x\n",regs.r12,regs.sp,regs.lr,regs.pc);
//DEBUGF("CPSR=0x%x\t\n",regs.cpsr);
}
#ifdef HAVE_ADJUSTABLE_CPU_FREQ
void set_cpu_frequency(long frequency)
{
(void)freqency;
}
#endif