d052f13999
Change-Id: I04bd7599a58669df96dfd018a2ab0e3d53e06694 |
||
---|---|---|
.. | ||
dump_rootfs.sh | ||
exec_file.sh | ||
exec_file_extern.sh.in | ||
install_dualboot.sh | ||
Makefile | ||
README |
This directory contains various scripts that can be used to help development process on the Sony NWZ players. The proper way to use it is to use the Makefile. In case of doubt, run make to get the up-to-date documentation. ***************************** Performing a firmware upgrade ***************************** To perform a firmware upgrade, first copy the firmware upgrade file to the root of the device, and make sure its named NW_WM_FW.UPG Another other name WILL NOT WORK. You've been warned. DO NOT FORGET TO UNMOUNT YOUR DEVICE PROPERLY BEFORE DOING WHAT FOLLOWS Once once, you need to tell the device to reboot in firmware upgrade mode. At the moment, we only support this operation in UMS/MSC (Mass Storage) mode. So if your device appears as a MTP device, go to the preference settings of your device and make sure your device is set to UMS/MSC or Auto. You need to identify the linux device associated with your device. There are plenty of tutorials on the net on how to do that, you can use mount or dmesg. Assuming the linux device corresponding to your player is /dev/sdx run AS ROOT OR USING SUDO make do_fw_upgrade NWZ_DEV=/dev/sdx If everything goes well, the device should reboot and perform the firmware upgrade. ******************************** Building a firmware upgrade that dumps important stuff ******************************** In early development stage, the most useful thing you can do is to dump important stuff from your device: - dmesg and mount output - FU (firmware upgrade) initrd - root FS (file system) We carefully wrote a script that does the following. First make sure that your device has enough free space (at least 300MB to be safe). You need to know the model of your device to build this firmware upgrade. Once you known it, run make list_targets to list all available targets. For example if your targets is one of the NWZ-E460 series, the corresponding target is nwz-e46x. Once you have identified the target. Run make dump_rootfs NWZ_TARGET=nwz-exyz UPG=dump_rootfs.upg (replace nwz-exyz with your target) This command will produce a firmware upgrade file called dump_rootfs.upg In order to run this firmware upgrade, you need to follows the instruction on how to perform a firmware upgrade. When performing the firmware upgrade, the script will perform various operation and create several files. Once the "upgrade" is finish and the device has rebooted, you should find the files in the dump_rootfs/ directory at the root of your device.