Michael Sevakis af395f4db6 Do core interrupt masking in a less general fashion and save some instructions to decrease size and speed things up a little bit. Small fix to a few places where interrupts would get enabled again where they shouldn't have been (context switching calls when disabled). ... git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16811 a1c6a512-1295-4272-9138-f99709370657		2008-03-26 01:50:41 +00:00
..
adc-meg-fx.c
adc-target.h
ata-meg-fx.c	Add a complete priority inheritance implementation to the scheduler (all mutex ownership and queue_send calls are inheritable). Priorities are differential so that dispatch depends on the runnable range of priorities. Codec priority can therefore be raised in small steps (pcmbuf updated to enable). Simplify the kernel functions to ease implementation and use the same kernel.c for both sim and target (I'm tired of maintaining two ;_). 1) Not sure if a minor audio break at first buffering issue will exist on large-sector disks (the main mutex speed issue was genuinely resolved earlier). At this point it's best dealt with at the buffering level. It seems a larger filechunk could be used again. 2) Perhaps 64-bit sims will have some minor issues (finicky) but a backroll of the code of concern there is a 5-minute job. All kernel objects become incompatible so a full rebuild and update is needed.	2008-03-25 02:34:12 +00:00
ata-target.h
backlight-meg-fx.c	- make the booloader compile again	2008-01-25 18:05:21 +00:00
backlight-target.h	Hardware controlled backlight brightness for iPod Video and Nano, retaining the software PWM fade in/ fade out. * Backlight handling cleanup, getting rid of one layer of 'lowlevelness'. * Use atomic GPIO bit manipulation for PP502x backlight handling.	2007-11-12 18:49:53 +00:00
button-meg-fx.c	Use the timeout API as a oneshot for headphone plug debouncing. Set at 1s for now which seems comfortable and was good for meg-fx but target-specific adjustment is easy enough (my 3G hp jack is dead so I can't check that one :( ). Do some minor rearrangements for init safety and consistency.	2008-01-27 21:13:04 +00:00
button-target.h	add separate button defines for the Gigabeat remote control	2007-05-20 11:42:04 +00:00
dma_start.c
i2c-meg-fx.c	Gigabeat: Replace generic i2c driver with one that uses the CPU's builtin controller. Add some clocking registers to 'View I/O ports'.	2007-06-26 02:11:30 +00:00
i2c-meg-fx.h	Gigabeat: Replace generic i2c driver with one that uses the CPU's builtin controller. Add some clocking registers to 'View I/O ports'.	2007-06-26 02:11:30 +00:00
kernel-meg-fx.c	Fix a change that shouldn't have been committed	2007-09-23 15:39:48 +00:00
lcd-meg-fx.c	Consistent naming scheme the various blit functions. * Removed lcd_blit_mono() for colour targets. Plugin API became incompatible, so sort, clean up & bump. * Implemented lcd_blit_mono() for M3.	2008-03-24 00:35:53 +00:00
lcd-target.h
pcm-meg-fx.c	Do core interrupt masking in a less general fashion and save some instructions to decrease size and speed things up a little bit. Small fix to a few places where interrupts would get enabled again where they shouldn't have been (context switching calls when disabled).	2008-03-26 01:50:41 +00:00
power-meg-fx.c	Hardware controlled backlight brightness for iPod Video and Nano, retaining the software PWM fade in/ fade out. * Backlight handling cleanup, getting rid of one layer of 'lowlevelness'. * Use atomic GPIO bit manipulation for PP502x backlight handling.	2007-11-12 18:49:53 +00:00
powermgmt-meg-fx.c	First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines.	2007-08-17 06:45:18 +00:00
sc606-meg-fx.c
sc606-meg-fx.h
system-meg-fx.c	meg-fx: correct an oops in the interrupt vector table	2008-01-18 09:17:47 +00:00
system-target.h	Unify the Gigabeat F/X and M:Robe MMU code while enabling it for the M:Robe	2007-10-23 03:29:15 +00:00
timer-meg-fx.c	Do core interrupt masking in a less general fashion and save some instructions to decrease size and speed things up a little bit. Small fix to a few places where interrupts would get enabled again where they shouldn't have been (context switching calls when disabled).	2008-03-26 01:50:41 +00:00
timer-target.h	Gigabeat: Add timer functionality. Rework tick timer setup to be exactly 100Hz. Metronome should work now but some pcm changes are needed to have faster tocks work correctly (in the works).	2007-07-06 21:36:32 +00:00
usb-meg-fx.c	FS #7691 - improved USB detection on PP devices. This patch modifies the target-tree function usb_detect() on all targets from bool to int, returning USB_INSERTED or USB_EXTRACTED instead of true or false. This was done to enable the PP usb_detect() to check for USB_POWER (either a connection to a USB wall charger, or the user holding "charge mode" button) and return that as a third value.	2007-09-04 08:03:07 +00:00
usb-target.h	FS #7691 - improved USB detection on PP devices. This patch modifies the target-tree function usb_detect() on all targets from bool to int, returning USB_INSERTED or USB_EXTRACTED instead of true or false. This was done to enable the PP usb_detect() to check for USB_POWER (either a connection to a USB wall charger, or the user holding "charge mode" button) and return that as a third value.	2007-09-04 08:03:07 +00:00
wmcodec-meg-fx.c	meg-fx: remove superfluous i2c_init call	2008-01-18 09:35:03 +00:00