rockbox/firmware/target/arm/as3525/sansa-e200v2/button-e200v2.c
Jonathan Gordon 2b81bce27c FS#9532 - e200v2 buttons
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19035 a1c6a512-1295-4272-9138-f99709370657
2008-11-07 05:31:05 +00:00

142 lines
3.8 KiB
C

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2006 by Barry Wardell
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
/* Taken from button-h10.c by Barry Wardell and reverse engineering by MrH. */
#include "system.h"
#include "button.h"
#include "backlight.h"
#include "powermgmt.h"
#define WHEEL_REPEAT_INTERVAL 300000
#define WHEEL_FAST_ON_INTERVAL 20000
#define WHEEL_FAST_OFF_INTERVAL 60000
#define WHEELCLICKS_PER_ROTATION 48 /* wheelclicks per full rotation */
/* Clickwheel */
#ifndef BOOTLOADER
static unsigned int old_wheel_value = 0;
static unsigned int wheel_repeat = BUTTON_NONE;
static unsigned int wheel_click_count = 0;
static unsigned int wheel_delta = 0;
static int wheel_fast_mode = 0;
static unsigned long last_wheel_usec = 0;
static unsigned long wheel_velocity = 0;
static long last_wheel_post = 0;
static long next_backlight_on = 0;
/* Buttons */
static bool hold_button = false;
static bool hold_button_old = false;
#define _button_hold() hold_button
#else
#define _button_hold() false /* FIXME */
#endif /* BOOTLOADER */
static int int_btn = BUTTON_NONE;
void button_init_device(void)
{
}
bool button_hold(void)
{
return _button_hold();
}
/* clickwheel */
#ifndef BOOTLOADER
void clickwheel_int(void)
{
}
#endif /* BOOTLOADER */
/* device buttons */
void button_int(void)
{
int dir_save_b = 0;
int afsel_save_b = 0;
int dir_save_c = 0;
int afsel_save_c = 0;
int_btn = BUTTON_NONE;
/* Save the current direction and afsel */
dir_save_b = GPIOB_DIR;
afsel_save_b = GPIOB_AFSEL;
dir_save_c = GPIOC_DIR;
afsel_save_c = GPIOC_AFSEL;
GPIOB_DIR = 0;
GPIOB_AFSEL = 0;
GPIOC_DIR = 0;
GPIOC_AFSEL = 0;
/* These should not be needed with button event interupts */
/* they are necessary now to clear out lcd data */
GPIOC_PIN(0) |= 1;
GPIOC_PIN(1) |= 1;
GPIOC_PIN(2) |= 1;
GPIOC_PIN(3) |= 1;
GPIOC_PIN(4) |= 1;
GPIOC_PIN(5) |= 1;
GPIOC_PIN(6) |= 1;
GPIOC_PIN(7) |= 1;
/* direct GPIO connections */
if (GPIOB_PIN(4))
int_btn |= BUTTON_POWER;
if (!GPIOC_PIN(6))
int_btn |= BUTTON_DOWN;
if (!GPIOC_PIN(5))
int_btn |= BUTTON_RIGHT;
if (!GPIOC_PIN(4))
int_btn |= BUTTON_SELECT;
if (!GPIOC_PIN(3))
int_btn |= BUTTON_LEFT;
if (!GPIOC_PIN(2))
int_btn |= BUTTON_UP;
/* return to settings needed for lcd */
GPIOB_DIR = dir_save_b;
GPIOB_AFSEL = afsel_save_b;
GPIOC_DIR = dir_save_c;
GPIOC_AFSEL = afsel_save_c;
}
/*
* Get button pressed from hardware
*/
int button_read_device(void)
{
#ifdef BOOTLOADER
/* Read buttons directly in the bootloader */
button_int();
#else
/* light handling */
if (hold_button != hold_button_old)
{
hold_button_old = hold_button;
backlight_hold_changed(hold_button);
}
#endif /* BOOTLOADER */
/* The int_btn variable is set in the button interrupt handler */
return int_btn;
}