rockbox/firmware/export/config
Rafaël Carré ba68f2dedd sd-as3525v2: add card hotswap to sd_thread
Clip+: add (disabled) configuration for µSD slot

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25194 a1c6a512-1295-4272-9138-f99709370657
2010-03-15 02:36:16 +00:00
..
archosfmrecorder.h
archosondiofm.h
archosondiosp.h
archosplayer.h
archosrecorder.h
archosrecorderv2.h
cowond2.h
creativezv.h
gigabeatfx.h
gigabeats.h
gogearhdd1630.h
gogearhdd6330.h
gogearsa9200.h
iaudio7.h
iaudiom3.h
iaudiom5.h
iaudiox5.h
ipod1g2g.h
ipod3g.h
ipod4g.h
ipodcolor.h
ipodmini1g.h Allow batteries with higher capacity for iPod Mini1G, Mini2G and Video (FS#8973). 2010-02-17 20:46:22 +00:00
ipodmini2g.h Allow batteries with higher capacity for iPod Mini1G, Mini2G and Video (FS#8973). 2010-02-17 20:46:22 +00:00
ipodnano1g.h
ipodnano2g.h Even more Nano2G FTL speedup. Now 8% faster than disk mode, 10% slower than the OFW. 4.5MB/s sustained (contiguous) write, 6.0MB/s read for me now. 2010-03-11 00:59:17 +00:00
ipodvideo.h Allow batteries with higher capacity for iPod Mini1G, Mini2G and Video (FS#8973). 2010-02-17 20:46:22 +00:00
iriverh10.h
iriverh10_5gb.h
iriverh100.h Enable recording histogram for h100 2010-03-03 23:05:36 +00:00
iriverh120.h Histogram display on recording screen. Based on the work of Jvo Studer in FS #5021 but reduced and reworked since the recording screen code changed quite a bit since his patch. For now enabled on iriver h1x0 and h3x0 only. 2010-03-03 22:16:08 +00:00
iriverh300.h Histogram display on recording screen. Based on the work of Jvo Studer in FS #5021 but reduced and reworked since the recording screen code changed quite a bit since his patch. For now enabled on iriver h1x0 and h3x0 only. 2010-03-03 22:16:08 +00:00
iriverifp7xx.h
logikdax.h
lyreproto1.h
meizum3.h
meizum6sl.h
meizum6sp.h
mini2440.h
mrobe100.h
mrobe500.h
ondavx747.h
ondavx767.h
ondavx777.h
samsungyh820.h
samsungyh920.h
samsungyh925.h
samsungyps3.h
sansac100.h
sansac200.h Sansa c200: allow 16 steps of backlight brightness (just like the OF) 2010-03-01 20:58:00 +00:00
sansac200v2.h
sansaclip.h Sansa Clip: reduce current consumption for more correct battery life estimation after r25030 2010-03-07 02:42:31 +00:00
sansaclipplus.h sd-as3525v2: add card hotswap to sd_thread 2010-03-15 02:36:16 +00:00
sansaclipv2.h Clipv2: enable FM so testers can confirm if it's detected 2010-03-15 01:22:41 +00:00
sansae200.h
sansae200v2.h
sansafuze.h
sansafuzev2.h AS3525v2: disable cpu frequency changes 2010-03-04 00:37:41 +00:00
sansam200.h
sansam200v4.h
sansaview.h
sim.h
tatungtpj1022.h
vibe500.h Packard Bell Vibe 500: clean up the power off, enable poweroff while charging. 2010-03-01 22:24:17 +00:00
zenvision.h
zenvisionm30gb.h
zenvisionm60gb.h