rockbox/firmware/target/arm/sandisk/sansa-e200
2007-04-14 19:49:58 +00:00
..
adc-e200.c Improved ADC driver for AS3514 (used in PP5024 - ie. Sansa e200) based off datasheet. 2007-03-13 01:50:13 +00:00
adc-target.h Improved ADC driver for AS3514 (used in PP5024 - ie. Sansa e200) based off datasheet. 2007-03-13 01:50:13 +00:00
ata-e200.c Dual core support for PP502x players (iPod G4 and later, iriver h10, Sansa - iPod G3 will be coming soon.) This allows threads to be run on either core provided that all communications between the cores is done using uncached memory. There should be no significant change in battery life from doing this. Documentation (on the RockboxKernel wiki page) will follow shortly. 2007-03-04 20:06:41 +00:00
ata-target.h Initial NAND driver for Sansa. This has had limited testing, and no testing on 6 or 8Gb models 2006-11-21 22:55:39 +00:00
backlight-e200.c Backlight support for Sansa, including brightness. Thanks to Rene 2007-02-03 13:39:20 +00:00
backlight-target.h Moved archos backlight code to target tree. Changed old mutlivalue CONFIG_BACKLIGHT to a simple HAVE_BACKLIGHT. 2007-04-12 22:12:13 +00:00
button-e200.c Add support for Sansa scrollwheel backlight. Turn light on when scrollwheel is in use, then back off again after a 5 second timeout. 2006-12-18 19:08:41 +00:00
button-target.h Untested first attempt at a Sansa button driver. Based on work by MrH 2006-10-14 12:16:29 +00:00
lcd-as-e200.S Optimized lcd_yuv_blit() (used by mpegplayer) for the Sansa E200. This is just a copy-and-paste of the Gigabeat version by Michael Sevakis with no attempt to adapt to the different CPU in the E200 - so there could be room for further improvement. Reported to increase the FPS for the 224x128 version of Elephants Dream from 21fps to 27fps. 2007-04-06 09:34:13 +00:00
lcd-e200.c e200: Use cached memory for the yuv chroma buffer. Gives some speedup. Align lcd_driver_framebuffer to the same alignment as lcd_framebuffer. The need for this became apparent when the first change cause aligment & 3 != 0 and the screen was wrapped one pixel right with a black pixel at (0, 0). 2007-04-14 19:49:58 +00:00
power-e200.c Fix problem where power_off() on the Sansa returns before the device is actually powered off. 2007-03-15 22:17:09 +00:00