Michael Sevakis 4d04132c76 PCM bottom layer simplification. pcm_rec_peak_addr variable no longer has to be handled there. Driver can just return current pointer for recording peaks. A new define, HAVE_PCM_REC_DMA_ADDRESS, specifies that physical addresses are being used for recording and translation is needed before starting a new block. The drivers need not worry about aligning start and size nor should care if either will be zero. All this will be checked in the logical layer first. ... git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25970 a1c6a512-1295-4272-9138-f99709370657		2010-05-12 14:05:36 +00:00
..
gigabeat-s	PCM bottom layer simplification. pcm_rec_peak_addr variable no longer has to be handled there. Driver can just return current pointer for recording peaks. A new define, HAVE_PCM_REC_DMA_ADDRESS, specifies that physical addresses are being used for recording and translation is needed before starting a new block. The drivers need not worry about aligning start and size nor should care if either will be zero. All this will be checked in the logical layer first.	2010-05-12 14:05:36 +00:00
app.lds	Gigabeat S: Reclaim about 800K of memory that was laying unused. Get rid of DEVBSS_ATTR for this target and implement as NOCACHEBSS_ATTR. Plugin and codec buffers move so all that is now incompatible (do full update). No version increase for plugins/codecs because the loader will reject them.	2010-05-08 07:45:34 +00:00
ata-imx31.c	Gigabeat S: Reclaim about 800K of memory that was laying unused. Get rid of DEVBSS_ATTR for this target and implement as NOCACHEBSS_ATTR. Plugin and codec buffers move so all that is now incompatible (do full update). No version increase for plugins/codecs because the loader will reject them.	2010-05-08 07:45:34 +00:00
ata-target.h
avic-imx31.c	i.MX31: Make some style changes to some driver code so that hardware vs. variable access is more obvious to the eye. Change a few data types and qualifiers. No functional differences.	2010-05-07 02:29:18 +00:00
avic-imx31.h	i.MX31: Make some style changes to some driver code so that hardware vs. variable access is more obvious to the eye. Change a few data types and qualifiers. No functional differences.	2010-05-07 02:29:18 +00:00
boot.lds	Gigabeat S: Reclaim about 800K of memory that was laying unused. Get rid of DEVBSS_ATTR for this target and implement as NOCACHEBSS_ATTR. Plugin and codec buffers move so all that is now incompatible (do full update). No version increase for plugins/codecs because the loader will reject them.	2010-05-08 07:45:34 +00:00
ccm-imx31.c
ccm-imx31.h
crt0.S	Clean the DCache just before going to main because areas were written by init code that need to be coherent (.ncbss and .sdmacode).	2010-05-08 08:32:09 +00:00
debug-imx31.c	Move c/h files implementing/defining standard library stuff into a new libc directory, also standard'ify some parts of the code base (almost entirely #include fixes).	2010-05-06 21:04:40 +00:00
debug-target.h	Updated our source code header to explicitly mention that we are GPL v2 or	2008-06-28 18:10:04 +00:00
dvfs_dptc-imx31.c	Gigabeat S bootloader: Fix archaic call placement in dptc_stop which hangs the bootloader before jumping to FW. Let the backlight LED ramp up after unplugging USB which just looks better.	2010-05-06 04:45:05 +00:00
dvfs_dptc-imx31.h	i.MX31/Gigabeat S: This should fix stability problems. One problem was to start using the DVFS controller properly so that interrupts will be masked at the lowest and highest frequency indexes. Millions of useless interrupts were occurring at 132MHz because its index was 2, not 3, which masks it automatically when it can't go slower. Stopping the flood was enough to actually see the difference in general. IRQ must be disabled when fiddling with the CCM registers and only enabled when waiting for voltage ramp as having them enables also causes spurious DVFS ints. Implement interruptible ISR pro/epilogue more safely (always using IRQ stack even in SVC mode handling). Fix an improper inequality in DVFS code (which set regs for down when going up and v.v.). Misc. support changes. Have internal tables take less RAM.	2010-05-06 03:23:51 +00:00
gpio-imx31.c	i.MX31/Gigabeat S minor cleaning: Make HW access more obvious in places I forgot to do earlier. Reduce the number of structs that need to be filled-out for some drivers just to simplify a little. Change some types.	2010-05-07 10:53:19 +00:00
gpio-imx31.h	i.MX31/Gigabeat S minor cleaning: Make HW access more obvious in places I forgot to do earlier. Reduce the number of structs that need to be filled-out for some drivers just to simplify a little. Change some types.	2010-05-07 10:53:19 +00:00
i2c-imx31.c	i.MX31: Make some style changes to some driver code so that hardware vs. variable access is more obvious to the eye. Change a few data types and qualifiers. No functional differences.	2010-05-07 02:29:18 +00:00
i2c-imx31.h	i.MX31: Make some style changes to some driver code so that hardware vs. variable access is more obvious to the eye. Change a few data types and qualifiers. No functional differences.	2010-05-07 02:29:18 +00:00
iomuxc-imx31.c
iomuxc-imx31.h
mc13783-imx31.c	i.MX31/Gigabeat S minor cleaning: Make HW access more obvious in places I forgot to do earlier. Reduce the number of structs that need to be filled-out for some drivers just to simplify a little. Change some types.	2010-05-07 10:53:19 +00:00
mmu-imx31.c
mmu-imx31.h
rolo_restart_firmware.S
sdma-imx31.c	Gigabeat S: Reclaim about 800K of memory that was laying unused. Get rid of DEVBSS_ATTR for this target and implement as NOCACHEBSS_ATTR. Plugin and codec buffers move so all that is now incompatible (do full update). No version increase for plugins/codecs because the loader will reject them.	2010-05-08 07:45:34 +00:00
sdma-imx31.h
sdma_script_code.h
sdma_struct.h
serial-imx31.h
spi-imx31.c	i.MX31: Make some style changes to some driver code so that hardware vs. variable access is more obvious to the eye. Change a few data types and qualifiers. No functional differences.	2010-05-07 02:29:18 +00:00
spi-imx31.h	i.MX31: Make some style changes to some driver code so that hardware vs. variable access is more obvious to the eye. Change a few data types and qualifiers. No functional differences.	2010-05-07 02:29:18 +00:00