Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware/target/arm/s3c2440/gigabeat-fx/lcd-meg-fx.c

437 lines
12 KiB
C
Raw Blame History

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2007 by Greg White
*
* All files in this archive are subject to the GNU General Public License.
* See the file COPYING in the source tree root for full license agreement.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "config.h"
#include "system.h"
#include "cpu.h"
#include "string.h"
#include "lcd.h"
#include "kernel.h"
#include "lcd-target.h"
#define LCDADDR(x, y) (&lcd_framebuffer[(y)][(x)])
static volatile bool lcd_on = true;
volatile bool lcd_poweroff = false;
static unsigned lcd_yuv_options = 0;
/*
** This is imported from lcd-16bit.c
*/
extern struct viewport* current_vp;
/* Copies a rectangle from one framebuffer to another. Can be used in
single transfer mode with width = num pixels, and height = 1 which
allows a full-width rectangle to be copied more efficiently. */
extern void lcd_copy_buffer_rect(fb_data *dst, const fb_data *src,
int width, int height);
bool lcd_enabled()
{
return lcd_on;
}
unsigned int LCDBANK(unsigned int address)
{
return ((address >> 22) & 0xff);
}
unsigned int LCDBASEU(unsigned int address)
{
return (address & ((1 << 22)-1)) >> 1;
}
unsigned int LCDBASEL(unsigned int address)
{
address += 320*240*2;
return (address & ((1 << 22)-1)) >> 1;
}
inline void delay_cycles(volatile int delay)
{
while(delay>0) delay--;
}
void SPI_LCD_CS(bool select)
{
delay_cycles(0x4FFF);
GPBCON&=~0x30000;
GPBCON|=0x10000;
if(select)
GPBDAT|=0x100;
else
GPBDAT&=~0x100;
}
void reset_LCD(bool reset)
{
GPBCON&=~0xC000;
GPBCON|=0x4000;
if(reset)
GPBDAT|=0x80;
else
GPBDAT&=~0x80;
}
void SPI_Send_Bytes(const unsigned char *array, int count)
{
while (count--)
{
while ((SPSTA0&0x01)==0){};
SPTDAT0=*array++;
}
}
void Setup_LCD_SPI(void)
{
s3c_regset(&CLKCON, 0x40000);
SPI_LCD_CS(false);
SPCON0=0x3E;
SPPRE0=24;
}
void Setup_LCD_CTRL(void)
{
/* ENVID = 0, BPPMODE = 16 bpp, PNRMODE = TFT, MMODE = Each Frame, CLKVAL = 8 */
LCDCON1 = 0x878;
/* VCPW = 1, VFPD = 5, LINEVAL = 319, VBPD = 7 */
LCDCON2 = 0x74FC141;
/* HFPD = 9, HOZVAL = 239, HBPD = 7 */
LCDCON3 = 0x38EF09;
/* HSPW = 7 */
LCDCON4 = 7;
/* HWSWP = 1, INVVFRAM = 1, INVVLINE = 1, FRM565 = 1, All others = 0 */
LCDCON5 = 0xB01;
LCDSADDR1 = (LCDBANK((unsigned)FRAME) << 21) | (LCDBASEU((unsigned)FRAME));
LCDSADDR2 = LCDBASEL((unsigned)FRAME);
LCDSADDR3 = 0x000000F0;
}
/* LCD init */
void lcd_init_device(void)
{
#ifdef BOOTLOADER
int i;
/* When the Rockbox bootloader starts, we are changing framebuffer address,
but we don't want what's shown on the LCD to change until we do an
lcd_update(), so copy the data from the old framebuffer to the new one */
unsigned short *buf = (unsigned short*)FRAME;
memcpy(FRAME, (short *)((LCDSADDR1)<<1), 320*240*2);
/* The Rockbox bootloader is transitioning from RGB555I to RGB565 mode
so convert the frambuffer data accordingly */
for(i=0; i< 320*240; i++){
*buf = ((*buf>>1) & 0x1F) | (*buf & 0xffc0);
buf++;
}
#endif
/* Set pins up */
GPCCON |= 0xAAA000A8;
GPCUP |= 0xFC0E;
GPDCON |= 0xAAA0AAA0;
GPDUP |= 0xFCFC;
GPHUP &= 0x600;
GPECON |= 0x0A800000;
GPEUP |= 0x3800;
GPBUP |= 0x181;
#if !defined(BOOTLOADER)
lcd_poweroff = false;
#endif
s3c_regset(&CLKCON, 0x20); /* enable LCD clock */
Setup_LCD_SPI();
Setup_LCD_CTRL();
delay_cycles(0xA000);
reset_LCD(true);
LCDCON1|=0x01;
delay_cycles(0x80000);
#if 0
/* Setup the appropriate screen modes */
TCONSEL= 0xCE6;
#endif
/* SPI data - Right now we are not sure what each of these SPI writes is actually
* telling the lcd. Many thanks to Alex Gerchanovsky for discovering them.
*
* This looks like a register, data combination, 0 denoting a register address,
* 1 denoting data. Addr 0x04 is used more than once and may be an enable.
*/
const unsigned char initbuf[] =
{
0,0x0F,1,0x01,
0,0x09,1,0x06,
0,0x16,1,0xA6,
0,0x1E,1,0x49,
0,0x1F,1,0x26,
0,0x0B,1,0x2F,
0,0x0C,1,0x2B,
0,0x19,1,0x5E,
0,0x1A,1,0x15,
0,0x1B,1,0x15,
0,0x1D,1,0x01,
0,0x00,1,0x03,
0,0x01,1,0x10,
0,0x02,1,0x0A,
0,0x06,1,0x04,
0,0x08,1,0x2E,
0,0x24,1,0x12,
0,0x25,1,0x3F,
0,0x26,1,0x0B,
0,0x27,1,0x00,
0,0x28,1,0x00,
0,0x29,1,0xF6,
0,0x2A,1,0x03,
0,0x2B,1,0x0A,
0,0x04,1,0x01,
};
SPI_LCD_CS(true);
SPI_Send_Bytes(initbuf, sizeof(initbuf));
SPI_LCD_CS(false);
s3c_regclr(&CLKCON, 0x40000); /* disable SPI clock */
}
/* Update a fraction of the display. */
void lcd_update_rect(int x, int y, int width, int height)
{
fb_data *dst, *src;
if (!lcd_on)
return;
if (x + width > LCD_WIDTH)
width = LCD_WIDTH - x; /* Clip right */
if (x < 0)
width += x, x = 0; /* Clip left */
if (width <= 0)
return; /* nothing left to do */
if (y + height > LCD_HEIGHT)
height = LCD_HEIGHT - y; /* Clip bottom */
if (y < 0)
height += y, y = 0; /* Clip top */
if (height <= 0)
return; /* nothing left to do */
/* TODO: It may be faster to swap the addresses of lcd_driver_framebuffer
* and lcd_framebuffer */
dst = (fb_data *)FRAME + LCD_WIDTH*y + x;
src = &lcd_framebuffer[y][x];
/* Copy part of the Rockbox framebuffer to the second framebuffer */
if (width < LCD_WIDTH)
{
/* Not full width - do line-by-line */
lcd_copy_buffer_rect(dst, src, width, height);
}
else
{
/* Full width - copy as one line */
lcd_copy_buffer_rect(dst, src, LCD_WIDTH*height, 1);
}
}
void lcd_enable(bool state)
{
if(!lcd_poweroff)
return;
if(state)
{
if(!lcd_on)
{
lcd_on = true;
lcd_update();
LCDCON1 |= 1;
}
}
else
{
if(lcd_on) {
lcd_on = false;
LCDCON1 &= ~1;
}
}
}
/* Update the display.
This must be called after all other LCD functions that change the display. */
void lcd_update(void)
{
if (!lcd_on)
return;
lcd_copy_buffer_rect((fb_data *)FRAME, &lcd_framebuffer[0][0],
LCD_WIDTH*LCD_HEIGHT, 1);
}
void lcd_bitmap_transparent_part(const fb_data *src, int src_x, int src_y,
int stride, int x, int y, int width,
int height)
{
int w, px;
fb_data *dst;
if (x + width > current_vp->width)
width = current_vp->width - x; /* Clip right */
if (x < 0)
width += x, x = 0; /* Clip left */
if (width <= 0)
return; /* nothing left to do */
if (y + height > current_vp->height)
height = current_vp->height - y; /* Clip bottom */
if (y < 0)
height += y, y = 0; /* Clip top */
if (height <= 0)
return; /* nothing left to do */
src += stride * src_y + src_x; /* move starting point */
dst = &lcd_framebuffer[current_vp->y+y][current_vp->x+x];
asm volatile (
".rowstart: \r\n"
"mov %[w], %[width] \r\n" /* Load width for inner loop */
".nextpixel: \r\n"
"ldrh %[px], [%[s]], #2 \r\n" /* Load src pixel */
"add %[d], %[d], #2 \r\n" /* Uncoditionally increment dst */
"cmp %[px], %[fgcolor] \r\n" /* Compare to foreground color */
"streqh %[fgpat], [%[d], #-2] \r\n" /* Store foregroud if match */
"cmpne %[px], %[transcolor] \r\n" /* Compare to transparent color */
"strneh %[px], [%[d], #-2] \r\n" /* Store dst if not transparent */
"subs %[w], %[w], #1 \r\n" /* Width counter has run down? */
"bgt .nextpixel \r\n" /* More in this row? */
"add %[s], %[s], %[sstp], lsl #1 \r\n" /* Skip over to start of next line */
"add %[d], %[d], %[dstp], lsl #1 \r\n"
"subs %[h], %[h], #1 \r\n" /* Height counter has run down? */
"bgt .rowstart \r\n" /* More rows? */
: [w]"=&r"(w), [h]"+&r"(height), [px]"=&r"(px),
[s]"+&r"(src), [d]"+&r"(dst)
: [width]"r"(width),
[sstp]"r"(stride - width),
[dstp]"r"(LCD_WIDTH - width),
[transcolor]"r"(TRANSPARENT_COLOR),
[fgcolor]"r"(REPLACEWITHFG_COLOR),
[fgpat]"r"(current_vp->fg_pattern)
);
}
void lcd_yuv_set_options(unsigned options)
{
lcd_yuv_options = options;
}
/* Line write helper function for lcd_yuv_blit. Write two lines of yuv420. */
extern void lcd_write_yuv420_lines(fb_data *dst,
unsigned char const * const src[3],
int width,
int stride);
extern void lcd_write_yuv420_lines_odither(fb_data *dst,
unsigned char const * const src[3],
int width,
int stride,
int x_screen, /* To align dither pattern */
int y_screen);
/* Performance function to blit a YUV bitmap directly to the LCD */
/* For the Gigabeat - show it rotated */
/* So the LCD_WIDTH is now the height */
void lcd_blit_yuv(unsigned char * const src[3],
int src_x, int src_y, int stride,
int x, int y, int width, int height)
{
/* Caches for chroma data so it only need be recaculated every other
line */
unsigned char const * yuv_src[3];
off_t z;
if (!lcd_on)
return;
/* Sorry, but width and height must be >= 2 or else */
width &= ~1;
height >>= 1;
y = LCD_WIDTH - 1 - y;
fb_data *dst = (fb_data*)FRAME + x * LCD_WIDTH + y;
z = stride*src_y;
yuv_src[0] = src[0] + z + src_x;
yuv_src[1] = src[1] + (z >> 2) + (src_x >> 1);
yuv_src[2] = src[2] + (yuv_src[1] - src[1]);
if (lcd_yuv_options & LCD_YUV_DITHER)
{
do
{
lcd_write_yuv420_lines_odither(dst, yuv_src, width, stride, y, x);
yuv_src[0] += stride << 1; /* Skip down two luma lines */
yuv_src[1] += stride >> 1; /* Skip down one chroma line */
yuv_src[2] += stride >> 1;
dst -= 2;
y -= 2;
}
while (--height > 0);
}
else
{
do
{
lcd_write_yuv420_lines(dst, yuv_src, width, stride);
yuv_src[0] += stride << 1; /* Skip down two luma lines */
yuv_src[1] += stride >> 1; /* Skip down one chroma line */
yuv_src[2] += stride >> 1;
dst -= 2;
}
while (--height > 0);
}
}
void lcd_set_contrast(int val) {
(void) val;
// TODO:
}
void lcd_set_invert_display(bool yesno) {
(void) yesno;
// TODO:
}
void lcd_set_flip(bool yesno) {
(void) yesno;
// TODO:
}
Reference in a new issue View git blame Copy permalink