..
archos /av300
as3525
sd-as3525v2: Load CID info to cardinfo.cid[] correctly.
2010-02-27 17:07:54 +00:00
at91sam
imx31
ARM: lr addresses the next instruction after the failing one in undefined instruction vector
2010-01-24 15:04:21 +00:00
ipod
Commit FS#11034 by Andrew Engelbrecht. Fixes default contrast value on ipod 3G.
2010-02-18 04:21:15 +00:00
iriver
Fix tabs
2010-01-03 10:19:43 +00:00
olympus
Comment out LOGF_ENABLE defines everywhere, replace evil comments
2009-11-03 16:25:03 +00:00
pbell
Packard Bell Vibe 500: Improve/fix scrollstrip scrolling. The idea was taken from the ipod's clickweel source.
2010-02-10 18:42:48 +00:00
philips
Fix even more tabs
2010-01-03 10:35:31 +00:00
pnx0101
ARM: lr addresses the next instruction after the failing one in undefined instruction vector
2010-01-24 15:04:21 +00:00
s3c2440
ARM: lr addresses the next instruction after the failing one in undefined instruction vector
2010-01-24 15:04:21 +00:00
s5l8700
Reduce Nano2G main thread stack size to the default value again. The huge sector buffers of the FTL have been moved to the bss some time ago, so this isn't needed any more.
2010-02-17 16:31:19 +00:00
samsung
Fix tabs
2010-01-03 10:19:43 +00:00
sandisk
Convert lcd_activation callbacks to use the event system to allow for multiple parallel callbacks (for custom statusbar).
2009-10-20 21:54:59 +00:00
tatung
Tatung Elio: a few more buttons identified
2009-11-24 15:42:54 +00:00
tcc77x
Remove tabs
2010-02-07 17:50:24 +00:00
tcc780x
ARM: lr addresses the next instruction after the failing one in undefined instruction vector
2010-01-24 15:04:21 +00:00
tms320dm320
Remove tabs
2010-02-07 17:50:24 +00:00
adc-as3514.c
adc-pp5020.c
Add initial Packard Bell Vibe 500 port, by Szymon Dziok
2010-01-18 19:05:20 +00:00
ascodec-pp.c
ascodec-target.h
ata-as-arm.S
M:Robe 500 - Enable ASM optimized ATA interface improving disk access speed.
2009-11-09 00:38:10 +00:00
ata-nand-telechips.c
Core changes to allow storage drivers to do cleanup on shutdown, and iPod Nano 2G shutdown code rework (FS#10668)
2009-10-09 20:36:09 +00:00
ata-pp5002.c
ata-pp5020.c
Enable ATA DMA on pp5020 based players with ATA drives.
2010-01-31 11:07:29 +00:00
ata-sd-pp.c
Remove unused card_detect(), and make card_detect_target() static inline in each sd driver.
2009-11-26 00:51:09 +00:00
ata-target.h
Enable ATA DMA on pp5020 based players with ATA drives.
2010-01-31 11:07:29 +00:00
audio-pp.c
correction on DEFINE, thanks to Kugel who spotted it ;)
2009-12-01 18:11:06 +00:00
crt0-pp-bl.S
Merry Christmas Gogear HDD6330 owners! This is the start of the HDD6330 port. At the moment, it's essentially a copy of the HDD1630 port with a minimal LCD driver. The touchpad doesn't work as expected, but you can still kind of navigate and listen to music/radio.
2009-12-25 04:05:01 +00:00
crt0-pp.S
ARM: lr addresses the next instruction after the failing one in undefined instruction vector
2010-01-24 15:04:21 +00:00
crt0.S
crt0: init correctly as3525v2
2010-02-22 08:28:58 +00:00
ffs-arm.S
ARM <= v5: Tiny optimisation exploiting the location of the table.
2009-12-26 13:22:51 +00:00
i2c-pp.c
Add initial Packard Bell Vibe 500 port, by Szymon Dziok
2010-01-18 19:05:20 +00:00
i2c-telechips.c
i2s-pp.c
Philips SA9200: initialize i2c, i2s, and as3514 as the OF does. Fixes clicks/pops heard when reading the adc.
2009-08-01 17:51:00 +00:00
kernel-pp.c
lcd-as-memframe.S
Apply some ARMv6 optimisations to YUV blitting. Speeds up mpegplayer on Gigabeat S by ~2% in undithered and ~7.5% in dithered mode.
2009-07-15 22:14:21 +00:00
lcd-c200_c200v2.c
Sansa AMS: refactor DBOP button reading (e200v2/Fuze/c200v2)
2010-01-06 23:41:36 +00:00
lcd-ssd1815.c
memcpy-arm.S
Remove tabs
2010-02-07 17:50:24 +00:00
memmove-arm.S
Remove tabs
2010-02-07 17:50:24 +00:00
memset-arm.S
memset16-arm.S
mmu-arm.h
mmu-arm.S
Split ARMv6 code from mmu-arm.S
2009-10-18 13:07:14 +00:00
mmu-armv6.S
Split ARMv6 code from mmu-arm.S
2009-10-18 13:07:14 +00:00
pcm-pp.c
pcm-telechips.c
i7: pcm-telechips fix sampling rate that was about 40000 instead of 44100
2009-09-20 19:53:15 +00:00
powermgmt-ascodec.c
sd-pp-target.h
support-arm.S
Clarify comments in ARMv6 divider regarding special-case handling of large (high bit set) numerators.
2010-02-20 06:29:23 +00:00
system-arm.c
Fix dangling #endif
2009-11-14 11:37:16 +00:00
system-arm.h
Change "r" back to "i" (i is for immediate, so no syntax error) and reclaim a bit binsize. Live with that those function don't build with -O0 since they rely on inlining.
2009-11-15 22:29:22 +00:00
system-pp502x.c
Add initial Packard Bell Vibe 500 port, by Szymon Dziok
2010-01-18 19:05:20 +00:00
system-pp5002.c
Make RoLo work on PP5002. * Rename CACHE_CTL flag values on PP5002 for consistency.
2009-10-19 21:38:52 +00:00
system-target.h
timer-pp.c
usb-drv-arc.c
Fix tabs
2010-01-03 10:19:43 +00:00
usb-fw-pp502x.c
Add initial Packard Bell Vibe 500 port, by Szymon Dziok
2010-01-18 19:05:20 +00:00
usb-fw-pp5002.c
usb-s3c6400x.c
Fix iPod Nano 2G USB:
2010-01-17 19:05:42 +00:00
usb-target.h
usb-tcc.c
Make the tcc usb driver compile without warnings. No functional changes
2010-01-19 21:17:32 +00:00
wmcodec-pp.c
Add initial Packard Bell Vibe 500 port, by Szymon Dziok
2010-01-18 19:05:20 +00:00
wmcodec-telechips.c
a872587a8d