658026e626
Note: I left behind lcd_bitmap in features.txt, because removing it would require considerable work in the manual and the translations. Change-Id: Ia8ca7761f610d9332a0d22a7d189775fb15ec88a
162 lines
4.5 KiB
C
162 lines
4.5 KiB
C
/*
|
|
* This config file is for the Sansa M200 V4 series
|
|
*/
|
|
|
|
/* For Rolo and boot loader */
|
|
#define MODEL_NUMBER 42
|
|
|
|
#define MODEL_NAME "Sandisk Sansa m200 v4 series"
|
|
|
|
/* Enable FAT16 support */
|
|
#define HAVE_FAT16SUPPORT
|
|
|
|
#define HW_SAMPR_CAPS SAMPR_CAP_ALL
|
|
|
|
/* define this if you have recording possibility */
|
|
#define HAVE_RECORDING
|
|
|
|
#define REC_SAMPR_CAPS (SAMPR_CAP_48 | SAMPR_CAP_44 | SAMPR_CAP_32 | \
|
|
SAMPR_CAP_24 | SAMPR_CAP_22 | SAMPR_CAP_16 | \
|
|
SAMPR_CAP_12 | SAMPR_CAP_11 | SAMPR_CAP_8)
|
|
|
|
/* because the samplerates don't match at each point, we must be able to
|
|
* tell PCM which set of rates to use. not needed if recording rates are
|
|
* a simple subset of playback rates and are equal values. */
|
|
#define CONFIG_SAMPR_TYPES
|
|
|
|
/* Define bitmask of input sources - recordable bitmask can be defined
|
|
explicitly if different */
|
|
#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FMRADIO)
|
|
|
|
|
|
|
|
|
|
/* define this if you can flip your LCD */
|
|
#define HAVE_LCD_FLIP
|
|
|
|
/* define this if you can invert the colours on your LCD */
|
|
#define HAVE_LCD_INVERT
|
|
|
|
/* define this if you have access to the quickscreen */
|
|
//#define HAVE_QUICKSCREEN
|
|
|
|
/* define this if you would like tagcache to build on this target */
|
|
//#define HAVE_TAGCACHE
|
|
|
|
/* define this if you have a flash memory storage */
|
|
#define HAVE_FLASH_STORAGE
|
|
|
|
/* define this if the flash memory uses the SecureDigital Memory Card protocol */
|
|
#define CONFIG_STORAGE STORAGE_SD
|
|
|
|
/* LCD dimensions */
|
|
#define LCD_WIDTH 128
|
|
#define LCD_HEIGHT 64
|
|
/* sqrt(128^2 + 64^2) / 1.8 = 79.5 */
|
|
#define LCD_DPI 80
|
|
#define LCD_DEPTH 1
|
|
|
|
#define LCD_PIXELFORMAT VERTICAL_PACKING
|
|
|
|
/* Display colours, for screenshots and sim (0xRRGGBB) */
|
|
#define LCD_DARKCOLOR 0x000000
|
|
#define LCD_BRIGHTCOLOR 0x5e6854
|
|
#define LCD_BL_DARKCOLOR 0x000000
|
|
#define LCD_BL_BRIGHTCOLOR 0x3ca0e6
|
|
|
|
/* define this to indicate your device's keypad */
|
|
#define CONFIG_KEYPAD SANSA_M200_PAD
|
|
|
|
/* Define this to enable morse code input */
|
|
#define HAVE_MORSE_INPUT
|
|
|
|
/* define this if you have a real-time clock */
|
|
#ifndef BOOTLOADER
|
|
#define CONFIG_RTC RTC_AS3514
|
|
#endif
|
|
|
|
/* define this if you have RTC RAM available for settings */
|
|
//#define HAVE_RTC_RAM
|
|
|
|
/* Define this if you have a software controlled poweroff */
|
|
#define HAVE_SW_POWEROFF
|
|
|
|
/* The number of bytes reserved for loadable codecs */
|
|
#define CODEC_SIZE 0x48000 /* in IRAM */
|
|
|
|
/* The number of bytes reserved for loadable plugins */
|
|
#define PLUGIN_BUFFER_SIZE 0x10000
|
|
|
|
#define AB_REPEAT_ENABLE
|
|
|
|
#define CONFIG_TUNER TEA5767
|
|
#define CONFIG_TUNER_XTAL 32768
|
|
|
|
|
|
|
|
|
|
/* Define this if you have the TLV320 audio codec */
|
|
/*#define HAVE_TLV320*/
|
|
|
|
/* TLV320 has no tone controls, so we use the software ones */
|
|
#define HAVE_SW_TONE_CONTROLS
|
|
|
|
/* We're working on the assumption that the AS3525 has something
|
|
similar to the AS3514 for audio codec etc */
|
|
#define HAVE_AS3514
|
|
|
|
/* Define this for LCD backlight available */
|
|
#define HAVE_BACKLIGHT
|
|
|
|
/* Define how much SD sectors are reserved for OF */
|
|
#define AMS_OF_SIZE 0x5000
|
|
|
|
#define BATTERY_CAPACITY_DEFAULT 1500 /* default battery capacity */
|
|
#define BATTERY_CAPACITY_MIN 1500 /* min. capacity selectable */
|
|
#define BATTERY_CAPACITY_MAX 3200 /* max. capacity selectable */
|
|
#define BATTERY_CAPACITY_INC 50 /* capacity increment */
|
|
#define BATTERY_TYPES_COUNT 1 /* only one type */
|
|
|
|
#define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE
|
|
|
|
/* define this if the unit should not shut down on low battery. */
|
|
#define NO_LOW_BATTERY_SHUTDOWN
|
|
|
|
/* Define this if you have an AMS AS3525 */
|
|
#define CONFIG_CPU AS3525
|
|
|
|
/* Define this if you want to use the AS3525 i2c interface */
|
|
#define CONFIG_I2C I2C_AS3525
|
|
|
|
/* Define this to the CPU frequency */
|
|
#define CPU_FREQ 248000000
|
|
|
|
/* Define this if you have adjustable CPU frequency */
|
|
#define HAVE_ADJUSTABLE_CPU_FREQ
|
|
|
|
/* Offset ( in the firmware file's header ) to the file CRC */
|
|
#define FIRMWARE_OFFSET_FILE_CRC 0
|
|
|
|
/* Offset ( in the firmware file's header ) to the real data */
|
|
#define FIRMWARE_OFFSET_FILE_DATA 8
|
|
|
|
#define CONFIG_USBOTG USBOTG_AS3525
|
|
|
|
/* enable these for the experimental usb stack */
|
|
#define HAVE_USBSTACK
|
|
//#define USB_HANDLED_BY_OF
|
|
#define USB_VENDOR_ID 0x0781
|
|
#define USB_PRODUCT_ID 0x7431
|
|
#define HAVE_USB_HID_MOUSE
|
|
#define HAVE_BOOTLOADER_USB_MODE
|
|
|
|
#define CONFIG_LCD LCD_SSD1815
|
|
|
|
#define BOOTFILE_EXT "sansa"
|
|
#define BOOTFILE "rockbox." BOOTFILE_EXT
|
|
#define BOOTDIR "/.rockbox"
|
|
|
|
#define IRAM_LCDFRAMEBUFFER IBSS_ATTR /* put the lcd frame buffer in IRAM */
|
|
|
|
/* Define this if a programmable hotkey is mapped */
|
|
#define HAVE_HOTKEY
|