73e2f7bd6b
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11201 a1c6a512-1295-4272-9138-f99709370657
2218 lines
63 KiB
C
2218 lines
63 KiB
C
/***************************************************************************
|
||
* __________ __ ___.
|
||
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
||
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
||
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||
* \/ \/ \/ \/ \/
|
||
* $Id$
|
||
*
|
||
* Copyright (C) 2002 Heikki Hannikainen
|
||
*
|
||
* All files in this archive are subject to the GNU General Public License.
|
||
* See the file COPYING in the source tree root for full license agreement.
|
||
*
|
||
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
||
* KIND, either express or implied.
|
||
*
|
||
****************************************************************************/
|
||
|
||
#include "config.h"
|
||
#include <stdio.h>
|
||
#include <stdbool.h>
|
||
#include <string.h>
|
||
#include "lcd.h"
|
||
#include "menu.h"
|
||
#include "debug_menu.h"
|
||
#include "kernel.h"
|
||
#include "sprintf.h"
|
||
#include "action.h"
|
||
#include "debug.h"
|
||
#include "thread.h"
|
||
#include "powermgmt.h"
|
||
#include "system.h"
|
||
#include "font.h"
|
||
#include "audio.h"
|
||
#include "mp3_playback.h"
|
||
#include "settings.h"
|
||
#include "dir.h"
|
||
#include "panic.h"
|
||
#include "screens.h"
|
||
#include "misc.h"
|
||
#include "splash.h"
|
||
#include "dircache.h"
|
||
#include "tagcache.h"
|
||
#include "lcd-remote.h"
|
||
#include "crc32.h"
|
||
#include "logf.h"
|
||
#ifndef SIMULATOR
|
||
#include "disk.h"
|
||
#include "adc.h"
|
||
#include "power.h"
|
||
#include "usb.h"
|
||
#include "rtc.h"
|
||
#include "ata.h"
|
||
#include "fat.h"
|
||
#include "mas.h"
|
||
#include "eeprom_24cxx.h"
|
||
#ifdef HAVE_MMC
|
||
#include "ata_mmc.h"
|
||
#endif
|
||
#ifdef CONFIG_TUNER
|
||
#include "tuner.h"
|
||
#include "radio.h"
|
||
#endif
|
||
#endif
|
||
|
||
#ifdef HAVE_LCD_BITMAP
|
||
#include "widgets.h"
|
||
#include "peakmeter.h"
|
||
#endif
|
||
#include "logfdisp.h"
|
||
#if CONFIG_CODEC == SWCODEC
|
||
#include "pcmbuf.h"
|
||
#include "pcm_playback.h"
|
||
#endif
|
||
|
||
/*---------------------------------------------------*/
|
||
/* SPECIAL DEBUG STUFF */
|
||
/*---------------------------------------------------*/
|
||
extern char ata_device;
|
||
extern int ata_io_address;
|
||
extern struct core_entry cores[NUM_CORES];
|
||
|
||
char thread_status_char(int status)
|
||
{
|
||
switch (status)
|
||
{
|
||
case STATE_RUNNING : return 'R';
|
||
case STATE_BLOCKED : return 'B';
|
||
case STATE_SLEEPING : return 'S';
|
||
case STATE_BLOCKED_W_TMO: return 'T';
|
||
}
|
||
|
||
return '?';
|
||
}
|
||
#ifndef SIMULATOR
|
||
#ifdef HAVE_LCD_BITMAP
|
||
/* Test code!!! */
|
||
bool dbg_os(void)
|
||
{
|
||
struct thread_entry *thread;
|
||
char buf[32];
|
||
int i;
|
||
int usage;
|
||
int status;
|
||
#if NUM_CORES > 1
|
||
unsigned int core;
|
||
int line;
|
||
#endif
|
||
|
||
lcd_setmargins(0, 0);
|
||
lcd_setfont(FONT_SYSFIXED);
|
||
lcd_clear_display();
|
||
|
||
while(1)
|
||
{
|
||
#if 0 /* Enable to simulate UI lag. */
|
||
int _x;
|
||
for (_x = 0; _x < 1000000L; _x++) ;
|
||
#endif
|
||
#if NUM_CORES > 1
|
||
lcd_puts(0, 0, "Core and stack usage:");
|
||
line = 0;
|
||
for(core = 0; core < NUM_CORES; core++)
|
||
{
|
||
for(i = 0; i < MAXTHREADS; i++)
|
||
{
|
||
thread = &cores[core].threads[i];
|
||
if (thread->name == NULL)
|
||
continue;
|
||
|
||
usage = thread_stack_usage(thread);
|
||
status = thread_get_status(thread);
|
||
|
||
snprintf(buf, 32, "(%d) %c%c %d %s: %d%%", core,
|
||
(status == STATE_RUNNING) ? '*' : ' ',
|
||
thread_status_char(status),
|
||
cores[CURRENT_CORE].threads[i].priority,
|
||
cores[core].threads[i].name, usage);
|
||
lcd_puts(0, ++line, buf);
|
||
}
|
||
}
|
||
#else
|
||
lcd_puts(0, 0, "Stack usage:");
|
||
for(i = 0; i < MAXTHREADS; i++)
|
||
{
|
||
thread = &cores[CURRENT_CORE].threads[i];
|
||
if (thread->name == NULL)
|
||
continue;
|
||
|
||
usage = thread_stack_usage(thread);
|
||
status = thread_get_status(thread);
|
||
# ifdef HAVE_PRIORITY_SCHEDULING
|
||
snprintf(buf, 32, "%c%c %d %s: %d%%",
|
||
(status == STATE_RUNNING) ? '*' : ' ',
|
||
thread_status_char(status),
|
||
cores[CURRENT_CORE].threads[i].priority,
|
||
cores[CURRENT_CORE].threads[i].name, usage);
|
||
# else
|
||
snprintf(buf, 32, "%c%c %s: %d%%",
|
||
(status == STATE_RUNNING) ? '*' : ' ',
|
||
(status == STATE_BLOCKED) ? 'B' : ' ',
|
||
cores[CURRENT_CORE].threads[i].name, usage);
|
||
# endif
|
||
lcd_puts(0, 1+i, buf);
|
||
}
|
||
#endif
|
||
|
||
lcd_update();
|
||
|
||
if (action_userabort(HZ/10))
|
||
return false;
|
||
}
|
||
return false;
|
||
}
|
||
#else /* !HAVE_LCD_BITMAP */
|
||
bool dbg_os(void)
|
||
{
|
||
char buf[32];
|
||
int button;
|
||
int usage;
|
||
int currval = 0;
|
||
|
||
lcd_clear_display();
|
||
|
||
while(1)
|
||
{
|
||
lcd_puts(0, 0, "Stack usage");
|
||
|
||
/* Only Archos Player uses this - so assume a single core */
|
||
usage = thread_stack_usage(&cores[CPU].threads[currval]);
|
||
snprintf(buf, 32, "%d: %d%% ", currval, usage);
|
||
lcd_puts(0, 1, buf);
|
||
|
||
button = get_action(CONTEXT_SETTINGS,HZ/10);
|
||
|
||
switch(button)
|
||
{
|
||
case ACTION_STD_CANCEL:
|
||
action_signalscreenchange();
|
||
return false;
|
||
|
||
case ACTION_SETTINGS_DEC:
|
||
currval--;
|
||
if(currval < 0)
|
||
currval = MAXTHREADS-1;
|
||
break;
|
||
|
||
case ACTION_SETTINGS_INC:
|
||
currval++;
|
||
if(currval > MAXTHREADS-1)
|
||
currval = 0;
|
||
break;
|
||
}
|
||
}
|
||
return false;
|
||
}
|
||
#endif /* !HAVE_LCD_BITMAP */
|
||
#endif /* !SIMULATOR */
|
||
#ifdef HAVE_LCD_BITMAP
|
||
#if CONFIG_CODEC != SWCODEC
|
||
#ifndef SIMULATOR
|
||
bool dbg_audio_thread(void)
|
||
{
|
||
char buf[32];
|
||
struct audio_debug d;
|
||
|
||
lcd_setmargins(0, 0);
|
||
lcd_setfont(FONT_SYSFIXED);
|
||
|
||
while(1)
|
||
{
|
||
if (action_userabort(HZ/5))
|
||
return false;
|
||
|
||
audio_get_debugdata(&d);
|
||
|
||
lcd_clear_display();
|
||
|
||
snprintf(buf, sizeof(buf), "read: %x", d.audiobuf_read);
|
||
lcd_puts(0, 0, buf);
|
||
snprintf(buf, sizeof(buf), "write: %x", d.audiobuf_write);
|
||
lcd_puts(0, 1, buf);
|
||
snprintf(buf, sizeof(buf), "swap: %x", d.audiobuf_swapwrite);
|
||
lcd_puts(0, 2, buf);
|
||
snprintf(buf, sizeof(buf), "playing: %d", d.playing);
|
||
lcd_puts(0, 3, buf);
|
||
snprintf(buf, sizeof(buf), "playable: %x", d.playable_space);
|
||
lcd_puts(0, 4, buf);
|
||
snprintf(buf, sizeof(buf), "unswapped: %x", d.unswapped_space);
|
||
lcd_puts(0, 5, buf);
|
||
|
||
/* Playable space left */
|
||
scrollbar(0, 6*8, 112, 4, d.audiobuflen, 0,
|
||
d.playable_space, HORIZONTAL);
|
||
|
||
/* Show the watermark limit */
|
||
scrollbar(0, 6*8+4, 112, 4, d.audiobuflen, 0,
|
||
d.low_watermark_level, HORIZONTAL);
|
||
|
||
snprintf(buf, sizeof(buf), "wm: %x - %x",
|
||
d.low_watermark_level, d.lowest_watermark_level);
|
||
lcd_puts(0, 7, buf);
|
||
|
||
lcd_update();
|
||
}
|
||
return false;
|
||
}
|
||
#endif /* !SIMULATOR */
|
||
#else /* CONFIG_CODEC == SWCODEC */
|
||
extern size_t filebuflen;
|
||
/* This is a size_t, but call it a long so it puts a - when it's bad. */
|
||
|
||
static unsigned int ticks, boost_ticks;
|
||
|
||
void dbg_audio_task(void)
|
||
{
|
||
#ifndef SIMULATOR
|
||
if(FREQ > CPUFREQ_NORMAL)
|
||
boost_ticks++;
|
||
#endif
|
||
|
||
ticks++;
|
||
}
|
||
|
||
bool dbg_audio_thread(void)
|
||
{
|
||
char buf[32];
|
||
int button;
|
||
int line;
|
||
bool done = false;
|
||
size_t bufused;
|
||
size_t bufsize = pcmbuf_get_bufsize();
|
||
int pcmbufdescs = pcmbuf_descs();
|
||
|
||
ticks = boost_ticks = 0;
|
||
|
||
tick_add_task(dbg_audio_task);
|
||
|
||
lcd_setmargins(0, 0);
|
||
lcd_setfont(FONT_SYSFIXED);
|
||
while(!done)
|
||
{
|
||
button = get_action(CONTEXT_STD,HZ/5);
|
||
switch(button)
|
||
{
|
||
case ACTION_STD_NEXT:
|
||
audio_next();
|
||
break;
|
||
case ACTION_STD_PREV:
|
||
audio_prev();
|
||
break;
|
||
case ACTION_STD_CANCEL:
|
||
done = true;
|
||
break;
|
||
}
|
||
action_signalscreenchange();
|
||
line = 0;
|
||
|
||
lcd_clear_display();
|
||
|
||
bufused = bufsize - pcmbuf_free();
|
||
|
||
snprintf(buf, sizeof(buf), "pcm: %7ld/%7ld", (long) bufused, (long) bufsize);
|
||
lcd_puts(0, line++, buf);
|
||
|
||
/* Playable space left */
|
||
scrollbar(0, line*8, LCD_WIDTH, 6, bufsize, 0, bufused, HORIZONTAL);
|
||
line++;
|
||
|
||
snprintf(buf, sizeof(buf), "codec: %8ld/%8ld", audio_filebufused(), (long) filebuflen);
|
||
lcd_puts(0, line++, buf);
|
||
|
||
/* Playable space left */
|
||
scrollbar(0, line*8, LCD_WIDTH, 6, filebuflen, 0,
|
||
audio_filebufused(), HORIZONTAL);
|
||
line++;
|
||
|
||
snprintf(buf, sizeof(buf), "track count: %2d", audio_track_count());
|
||
lcd_puts(0, line++, buf);
|
||
|
||
#ifndef SIMULATOR
|
||
snprintf(buf, sizeof(buf), "cpu freq: %3dMHz",
|
||
(int)((FREQ + 500000) / 1000000));
|
||
lcd_puts(0, line++, buf);
|
||
#endif
|
||
|
||
snprintf(buf, sizeof(buf), "boost ratio: %3d%%",
|
||
boost_ticks * 100 / ticks);
|
||
lcd_puts(0, line++, buf);
|
||
|
||
snprintf(buf, sizeof(buf), "pcmbufdesc: %2d/%2d",
|
||
pcmbuf_used_descs(), pcmbufdescs);
|
||
lcd_puts(0, line++, buf);
|
||
|
||
lcd_update();
|
||
}
|
||
|
||
tick_remove_task(dbg_audio_task);
|
||
|
||
return false;
|
||
}
|
||
#endif /* CONFIG_CODEC */
|
||
#endif /* HAVE_LCD_BITMAP */
|
||
|
||
|
||
#if CONFIG_CPU == TCC730
|
||
static unsigned flash_word_temp __attribute__ ((section (".idata")));
|
||
|
||
static void flash_write_word(unsigned addr, unsigned value) __attribute__ ((section(".icode")));
|
||
static void flash_write_word(unsigned addr, unsigned value) {
|
||
flash_word_temp = value;
|
||
|
||
long extAddr = (long)addr << 1;
|
||
ddma_transfer(1, 1, &flash_word_temp, extAddr, 2);
|
||
}
|
||
|
||
static unsigned flash_read_word(unsigned addr) __attribute__ ((section(".icode")));
|
||
static unsigned flash_read_word(unsigned addr) {
|
||
long extAddr = (long)addr << 1;
|
||
ddma_transfer(1, 1, &flash_word_temp, extAddr, 2);
|
||
return flash_word_temp;
|
||
}
|
||
|
||
#endif
|
||
|
||
/* Tool function to read the flash manufacturer and type, if available.
|
||
Only chips which could be reprogrammed in system will return values.
|
||
(The mode switch addresses vary between flash manufacturers, hence addr1/2) */
|
||
/* In IRAM to avoid problems when running directly from Flash */
|
||
bool dbg_flash_id(unsigned* p_manufacturer, unsigned* p_device,
|
||
unsigned addr1, unsigned addr2)
|
||
__attribute__ ((section (".icode")));
|
||
bool dbg_flash_id(unsigned* p_manufacturer, unsigned* p_device,
|
||
unsigned addr1, unsigned addr2)
|
||
|
||
{
|
||
#ifndef SIMULATOR
|
||
#if (CONFIG_CPU == PP5002) || (CONFIG_CPU == PP5020)
|
||
/* TODO: Implement for iPod */
|
||
(void)p_manufacturer;
|
||
(void)p_device;
|
||
(void)addr1;
|
||
(void)addr2;
|
||
#elif CONFIG_CPU == PNX0101
|
||
/* TODO: Implement for iFP7xx */
|
||
(void)p_manufacturer;
|
||
(void)p_device;
|
||
(void)addr1;
|
||
(void)addr2;
|
||
#elif CONFIG_CPU == S3C2440
|
||
/* TODO: Implement for Gigabeat */
|
||
(void)p_manufacturer;
|
||
(void)p_device;
|
||
(void)addr1;
|
||
(void)addr2;
|
||
#else
|
||
unsigned not_manu, not_id; /* read values before switching to ID mode */
|
||
unsigned manu, id; /* read values when in ID mode */
|
||
#if CONFIG_CPU == TCC730
|
||
#define FLASH(addr) (flash_read_word(addr))
|
||
#define SET_FLASH(addr, val) (flash_write_word((addr), (val)))
|
||
|
||
#else /* memory mapped */
|
||
#if CONFIG_CPU == SH7034
|
||
volatile unsigned char* flash = (unsigned char*)0x2000000; /* flash mapping */
|
||
#elif defined(CPU_COLDFIRE)
|
||
volatile unsigned short* flash = (unsigned short*)0; /* flash mapping */
|
||
#endif
|
||
#define FLASH(addr) (flash[addr])
|
||
#define SET_FLASH(addr, val) (flash[addr] = val)
|
||
#endif
|
||
int old_level; /* saved interrupt level */
|
||
|
||
not_manu = FLASH(0); /* read the normal content */
|
||
not_id = FLASH(1); /* should be 'A' (0x41) and 'R' (0x52) from the "ARCH" marker */
|
||
|
||
/* disable interrupts, prevent any stray flash access */
|
||
old_level = set_irq_level(HIGHEST_IRQ_LEVEL);
|
||
|
||
SET_FLASH(addr1, 0xAA); /* enter command mode */
|
||
SET_FLASH(addr2, 0x55);
|
||
SET_FLASH(addr1, 0x90); /* ID command */
|
||
/* Atmel wants 20ms pause here */
|
||
/* sleep(HZ/50); no sleeping possible while interrupts are disabled */
|
||
|
||
manu = FLASH(0); /* read the IDs */
|
||
id = FLASH(1);
|
||
|
||
SET_FLASH(0, 0xF0); /* reset flash (back to normal read mode) */
|
||
/* Atmel wants 20ms pause here */
|
||
/* sleep(HZ/50); no sleeping possible while interrupts are disabled */
|
||
|
||
set_irq_level(old_level); /* enable interrupts again */
|
||
|
||
/* I assume success if the obtained values are different from
|
||
the normal flash content. This is not perfectly bulletproof, they
|
||
could theoretically be the same by chance, causing us to fail. */
|
||
if (not_manu != manu || not_id != id) /* a value has changed */
|
||
{
|
||
*p_manufacturer = manu; /* return the results */
|
||
*p_device = id;
|
||
return true; /* success */
|
||
}
|
||
#endif
|
||
#else
|
||
(void) p_manufacturer;
|
||
(void) p_device;
|
||
(void) addr1;
|
||
(void) addr2;
|
||
#endif
|
||
return false; /* fail */
|
||
}
|
||
|
||
#ifndef SIMULATOR
|
||
#ifdef HAVE_LCD_BITMAP
|
||
bool dbg_hw_info(void)
|
||
{
|
||
#if CONFIG_CPU == SH7034
|
||
char buf[32];
|
||
int usb_polarity;
|
||
int pr_polarity;
|
||
int bitmask = *(unsigned short*)0x20000fc;
|
||
int rom_version = *(unsigned short*)0x20000fe;
|
||
unsigned manu, id; /* flash IDs */
|
||
bool got_id; /* flag if we managed to get the flash IDs */
|
||
unsigned rom_crc = 0xffffffff; /* CRC32 of the boot ROM */
|
||
bool has_bootrom; /* flag for boot ROM present */
|
||
int oldmode; /* saved memory guard mode */
|
||
|
||
#ifdef USB_ENABLE_ONDIOSTYLE
|
||
if(PADRL & 0x20)
|
||
#else
|
||
if(PADRH & 0x04)
|
||
#endif
|
||
usb_polarity = 0; /* Negative */
|
||
else
|
||
usb_polarity = 1; /* Positive */
|
||
|
||
if(PADRH & 0x08)
|
||
pr_polarity = 0; /* Negative */
|
||
else
|
||
pr_polarity = 1; /* Positive */
|
||
|
||
oldmode = system_memory_guard(MEMGUARD_NONE); /* disable memory guard */
|
||
|
||
/* get flash ROM type */
|
||
got_id = dbg_flash_id(&manu, &id, 0x5555, 0x2AAA); /* try SST, Atmel, NexFlash */
|
||
if (!got_id)
|
||
got_id = dbg_flash_id(&manu, &id, 0x555, 0x2AA); /* try AMD, Macronix */
|
||
|
||
/* check if the boot ROM area is a flash mirror */
|
||
has_bootrom = (memcmp((char*)0, (char*)0x02000000, 64*1024) != 0);
|
||
if (has_bootrom) /* if ROM and Flash different */
|
||
{
|
||
/* calculate CRC16 checksum of boot ROM */
|
||
rom_crc = crc_32((unsigned char*)0x0000, 64*1024, 0xffffffff);
|
||
}
|
||
|
||
system_memory_guard(oldmode); /* re-enable memory guard */
|
||
|
||
lcd_setmargins(0, 0);
|
||
lcd_setfont(FONT_SYSFIXED);
|
||
lcd_clear_display();
|
||
|
||
lcd_puts(0, 0, "[Hardware info]");
|
||
|
||
snprintf(buf, 32, "ROM: %d.%02d", rom_version/100, rom_version%100);
|
||
lcd_puts(0, 1, buf);
|
||
|
||
snprintf(buf, 32, "Mask: 0x%04x", bitmask);
|
||
lcd_puts(0, 2, buf);
|
||
|
||
snprintf(buf, 32, "USB: %s", usb_polarity?"positive":"negative");
|
||
lcd_puts(0, 3, buf);
|
||
|
||
snprintf(buf, 32, "PR: %s", pr_polarity?"positive":"negative");
|
||
lcd_puts(0, 4, buf);
|
||
|
||
if (got_id)
|
||
snprintf(buf, 32, "Flash: M=%02x D=%02x", manu, id);
|
||
else
|
||
snprintf(buf, 32, "Flash: M=?? D=??"); /* unknown, sorry */
|
||
lcd_puts(0, 5, buf);
|
||
|
||
if (has_bootrom)
|
||
{
|
||
if (rom_crc == 0x56DBA4EE) /* known Version 1 */
|
||
snprintf(buf, 32, "Boot ROM: V1");
|
||
else
|
||
snprintf(buf, 32, "ROMcrc: 0x%08x", rom_crc);
|
||
}
|
||
else
|
||
{
|
||
snprintf(buf, 32, "Boot ROM: none");
|
||
}
|
||
lcd_puts(0, 6, buf);
|
||
|
||
#ifndef HAVE_MMC /* have ATA */
|
||
snprintf(buf, 32, "ATA: 0x%x,%s", ata_io_address,
|
||
ata_device ? "slave":"master");
|
||
lcd_puts(0, 7, buf);
|
||
#endif
|
||
lcd_update();
|
||
|
||
while(1)
|
||
{
|
||
if (action_userabort(TIMEOUT_BLOCK))
|
||
return false;
|
||
}
|
||
#elif CONFIG_CPU == MCF5249 || CONFIG_CPU == MCF5250
|
||
char buf[32];
|
||
unsigned manu, id; /* flash IDs */
|
||
bool got_id; /* flag if we managed to get the flash IDs */
|
||
int oldmode; /* saved memory guard mode */
|
||
|
||
oldmode = system_memory_guard(MEMGUARD_NONE); /* disable memory guard */
|
||
|
||
/* get flash ROM type */
|
||
got_id = dbg_flash_id(&manu, &id, 0x5555, 0x2AAA); /* try SST, Atmel, NexFlash */
|
||
if (!got_id)
|
||
got_id = dbg_flash_id(&manu, &id, 0x555, 0x2AA); /* try AMD, Macronix */
|
||
|
||
system_memory_guard(oldmode); /* re-enable memory guard */
|
||
|
||
lcd_setmargins(0, 0);
|
||
lcd_setfont(FONT_SYSFIXED);
|
||
lcd_clear_display();
|
||
|
||
lcd_puts(0, 0, "[Hardware info]");
|
||
|
||
if (got_id)
|
||
snprintf(buf, 32, "Flash: M=%04x D=%04x", manu, id);
|
||
else
|
||
snprintf(buf, 32, "Flash: M=???? D=????"); /* unknown, sorry */
|
||
lcd_puts(0, 1, buf);
|
||
|
||
lcd_update();
|
||
|
||
while(1)
|
||
{
|
||
if (action_userabort(TIMEOUT_BLOCK))
|
||
return false;
|
||
}
|
||
#elif CONFIG_CPU == PP5020
|
||
char buf[32];
|
||
|
||
lcd_setmargins(0, 0);
|
||
lcd_setfont(FONT_SYSFIXED);
|
||
lcd_clear_display();
|
||
|
||
lcd_puts(0, 0, "[Hardware info]");
|
||
|
||
snprintf(buf, sizeof(buf), "HW rev: 0x%08x", ipod_hw_rev);
|
||
lcd_puts(0, 1, buf);
|
||
|
||
lcd_update();
|
||
|
||
while(1)
|
||
{
|
||
if (action_userabort(TIMEOUT_BLOCK))
|
||
return false;
|
||
}
|
||
#endif /* CONFIG_CPU */
|
||
return false;
|
||
}
|
||
#else /* !HAVE_LCD_BITMAP */
|
||
bool dbg_hw_info(void)
|
||
{
|
||
char buf[32];
|
||
int button;
|
||
int currval = 0;
|
||
int usb_polarity;
|
||
int bitmask = *(unsigned short*)0x20000fc;
|
||
int rom_version = *(unsigned short*)0x20000fe;
|
||
unsigned manu, id; /* flash IDs */
|
||
bool got_id; /* flag if we managed to get the flash IDs */
|
||
unsigned rom_crc = 0xffffffff; /* CRC32 of the boot ROM */
|
||
bool has_bootrom; /* flag for boot ROM present */
|
||
int oldmode; /* saved memory guard mode */
|
||
|
||
if(PADRH & 0x04)
|
||
usb_polarity = 0; /* Negative */
|
||
else
|
||
usb_polarity = 1; /* Positive */
|
||
|
||
oldmode = system_memory_guard(MEMGUARD_NONE); /* disable memory guard */
|
||
|
||
/* get flash ROM type */
|
||
got_id = dbg_flash_id(&manu, &id, 0x5555, 0x2AAA); /* try SST, Atmel, NexFlash */
|
||
if (!got_id)
|
||
got_id = dbg_flash_id(&manu, &id, 0x555, 0x2AA); /* try AMD, Macronix */
|
||
|
||
/* check if the boot ROM area is a flash mirror */
|
||
has_bootrom = (memcmp((char*)0, (char*)0x02000000, 64*1024) != 0);
|
||
if (has_bootrom) /* if ROM and Flash different */
|
||
{
|
||
/* calculate CRC16 checksum of boot ROM */
|
||
rom_crc = crc_32((unsigned char*)0x0000, 64*1024, 0xffffffff);
|
||
}
|
||
|
||
system_memory_guard(oldmode); /* re-enable memory guard */
|
||
|
||
lcd_clear_display();
|
||
|
||
lcd_puts(0, 0, "[HW Info]");
|
||
while(1)
|
||
{
|
||
switch(currval)
|
||
{
|
||
case 0:
|
||
snprintf(buf, 32, "ROM: %d.%02d",
|
||
rom_version/100, rom_version%100);
|
||
break;
|
||
case 1:
|
||
snprintf(buf, 32, "USB: %s",
|
||
usb_polarity?"pos":"neg");
|
||
break;
|
||
case 2:
|
||
snprintf(buf, 32, "ATA: 0x%x%s",
|
||
ata_io_address, ata_device ? "s":"m");
|
||
break;
|
||
case 3:
|
||
snprintf(buf, 32, "Mask: %04x", bitmask);
|
||
break;
|
||
case 4:
|
||
if (got_id)
|
||
snprintf(buf, 32, "Flash:%02x,%02x", manu, id);
|
||
else
|
||
snprintf(buf, 32, "Flash:??,??"); /* unknown, sorry */
|
||
break;
|
||
case 5:
|
||
if (has_bootrom)
|
||
{
|
||
if (rom_crc == 0x56DBA4EE) /* known Version 1 */
|
||
snprintf(buf, 32, "BootROM: V1");
|
||
else if (rom_crc == 0x358099E8)
|
||
snprintf(buf, 32, "BootROM: V2");
|
||
/* alternative boot ROM found in one single player so far */
|
||
else
|
||
snprintf(buf, 32, "R: %08x", rom_crc);
|
||
}
|
||
else
|
||
snprintf(buf, 32, "BootROM: no");
|
||
}
|
||
|
||
lcd_puts(0, 1, buf);
|
||
lcd_update();
|
||
|
||
button = get_action(CONTEXT_SETTINGS,TIMEOUT_BLOCK);
|
||
|
||
switch(button)
|
||
{
|
||
case ACTION_STD_CANCEL:
|
||
action_signalscreenchange();
|
||
return false;
|
||
|
||
case ACTION_SETTINGS_DEC:
|
||
currval--;
|
||
if(currval < 0)
|
||
currval = 5;
|
||
break;
|
||
|
||
case ACTION_SETTINGS_INC:
|
||
currval++;
|
||
if(currval > 5)
|
||
currval = 0;
|
||
break;
|
||
}
|
||
}
|
||
return false;
|
||
}
|
||
#endif /* !HAVE_LCD_BITMAP */
|
||
#endif /* !SIMULATOR */
|
||
|
||
#ifndef SIMULATOR
|
||
bool dbg_partitions(void)
|
||
{
|
||
int partition=0;
|
||
|
||
lcd_clear_display();
|
||
lcd_puts(0, 0, "Partition");
|
||
lcd_puts(0, 1, "list");
|
||
lcd_update();
|
||
sleep(HZ/2);
|
||
|
||
while(1)
|
||
{
|
||
char buf[32];
|
||
int button;
|
||
struct partinfo* p = disk_partinfo(partition);
|
||
|
||
lcd_clear_display();
|
||
snprintf(buf, sizeof buf, "P%d: S:%lx", partition, p->start);
|
||
lcd_puts(0, 0, buf);
|
||
snprintf(buf, sizeof buf, "T:%x %ld MB", p->type, p->size / 2048);
|
||
lcd_puts(0, 1, buf);
|
||
lcd_update();
|
||
|
||
button = get_action(CONTEXT_SETTINGS,TIMEOUT_BLOCK);
|
||
|
||
switch(button)
|
||
{
|
||
case ACTION_STD_CANCEL:
|
||
action_signalscreenchange();
|
||
return false;
|
||
|
||
case ACTION_SETTINGS_DEC:
|
||
partition--;
|
||
if (partition < 0)
|
||
partition = 3;
|
||
break;
|
||
|
||
case ACTION_SETTINGS_INC:
|
||
partition++;
|
||
if (partition > 3)
|
||
partition = 0;
|
||
break;
|
||
|
||
default:
|
||
if(default_event_handler(button) == SYS_USB_CONNECTED)
|
||
return true;
|
||
break;
|
||
}
|
||
}
|
||
return false;
|
||
}
|
||
#endif
|
||
|
||
#if defined(CPU_COLDFIRE) && defined(HAVE_SPDIF_OUT)
|
||
bool dbg_spdif(void)
|
||
{
|
||
char buf[128];
|
||
int line;
|
||
unsigned int control;
|
||
int x;
|
||
char *s;
|
||
int category;
|
||
int generation;
|
||
unsigned int interruptstat;
|
||
bool valnogood, symbolerr, parityerr;
|
||
bool done = false;
|
||
|
||
lcd_setmargins(0, 0);
|
||
lcd_clear_display();
|
||
lcd_setfont(FONT_SYSFIXED);
|
||
#ifdef HAVE_SPDIF_POWER
|
||
spdif_power_enable(true); /* We need SPDIF power for both sending & receiving */
|
||
#endif
|
||
PHASECONFIG = 0x34; /* Gain = 3*2^13, source = EBUIN */
|
||
|
||
while (!done)
|
||
{
|
||
line = 0;
|
||
|
||
control = EBU1RCVCCHANNEL1;
|
||
interruptstat = INTERRUPTSTAT;
|
||
INTERRUPTCLEAR = 0x03c00000;
|
||
|
||
valnogood = (interruptstat & 0x01000000)?true:false;
|
||
symbolerr = (interruptstat & 0x00800000)?true:false;
|
||
parityerr = (interruptstat & 0x00400000)?true:false;
|
||
|
||
snprintf(buf, sizeof(buf), "Val: %s Sym: %s Par: %s",
|
||
valnogood?"--":"OK",
|
||
symbolerr?"--":"OK",
|
||
parityerr?"--":"OK");
|
||
lcd_puts(0, line++, buf);
|
||
|
||
snprintf(buf, sizeof(buf), "Status word: %08x", (int)control);
|
||
lcd_puts(0, line++, buf);
|
||
|
||
line++;
|
||
|
||
x = control >> 31;
|
||
snprintf(buf, sizeof(buf), "PRO: %d (%s)",
|
||
x, x?"Professional":"Consumer");
|
||
lcd_puts(0, line++, buf);
|
||
|
||
x = (control >> 30) & 1;
|
||
snprintf(buf, sizeof(buf), "Audio: %d (%s)",
|
||
x, x?"Non-PCM":"PCM");
|
||
lcd_puts(0, line++, buf);
|
||
|
||
x = (control >> 29) & 1;
|
||
snprintf(buf, sizeof(buf), "Copy: %d (%s)",
|
||
x, x?"Permitted":"Inhibited");
|
||
lcd_puts(0, line++, buf);
|
||
|
||
x = (control >> 27) & 7;
|
||
switch(x)
|
||
{
|
||
case 0:
|
||
s = "None";
|
||
break;
|
||
case 1:
|
||
s = "50/15us";
|
||
break;
|
||
default:
|
||
s = "Reserved";
|
||
break;
|
||
}
|
||
snprintf(buf, sizeof(buf), "Preemphasis: %d (%s)", x, s);
|
||
lcd_puts(0, line++, buf);
|
||
|
||
x = (control >> 24) & 3;
|
||
snprintf(buf, sizeof(buf), "Mode: %d", x);
|
||
lcd_puts(0, line++, buf);
|
||
|
||
category = (control >> 17) & 127;
|
||
switch(category)
|
||
{
|
||
case 0x00:
|
||
s = "General";
|
||
break;
|
||
case 0x40:
|
||
s = "Audio CD";
|
||
break;
|
||
default:
|
||
s = "Unknown";
|
||
}
|
||
snprintf(buf, sizeof(buf), "Category: 0x%02x (%s)", category, s);
|
||
lcd_puts(0, line++, buf);
|
||
|
||
x = (control >> 16) & 1;
|
||
generation = x;
|
||
if(((category & 0x70) == 0x10) ||
|
||
((category & 0x70) == 0x40) ||
|
||
((category & 0x78) == 0x38))
|
||
{
|
||
generation = !generation;
|
||
}
|
||
snprintf(buf, sizeof(buf), "Generation: %d (%s)",
|
||
x, generation?"Original":"No ind.");
|
||
lcd_puts(0, line++, buf);
|
||
|
||
x = (control >> 12) & 15;
|
||
snprintf(buf, sizeof(buf), "Source: %d", x);
|
||
lcd_puts(0, line++, buf);
|
||
|
||
x = (control >> 8) & 15;
|
||
switch(x)
|
||
{
|
||
case 0:
|
||
s = "Unspecified";
|
||
break;
|
||
case 8:
|
||
s = "A (Left)";
|
||
break;
|
||
case 4:
|
||
s = "B (Right)";
|
||
break;
|
||
default:
|
||
s = "";
|
||
break;
|
||
}
|
||
snprintf(buf, sizeof(buf), "Channel: %d (%s)", x, s);
|
||
lcd_puts(0, line++, buf);
|
||
|
||
x = (control >> 4) & 15;
|
||
switch(x)
|
||
{
|
||
case 0:
|
||
s = "44.1kHz";
|
||
break;
|
||
case 0x4:
|
||
s = "48kHz";
|
||
break;
|
||
case 0xc:
|
||
s = "32kHz";
|
||
break;
|
||
}
|
||
snprintf(buf, sizeof(buf), "Frequency: %d (%s)", x, s);
|
||
lcd_puts(0, line++, buf);
|
||
|
||
x = (control >> 2) & 3;
|
||
snprintf(buf, sizeof(buf), "Clock accuracy: %d", x);
|
||
lcd_puts(0, line++, buf);
|
||
line++;
|
||
|
||
#ifndef SIMULATOR
|
||
snprintf(buf, sizeof(buf), "Measured freq: %ldHz",
|
||
(long)((long long)FREQMEAS*CPU_FREQ/((1 << 15)*3*(1 << 13))/128));
|
||
lcd_puts(0, line++, buf);
|
||
#endif
|
||
|
||
lcd_update();
|
||
|
||
if (action_userabort(HZ/10))
|
||
return false;
|
||
}
|
||
#ifdef HAVE_SPDIF_POWER
|
||
spdif_power_enable(global_settings.spdif_enable);
|
||
#endif
|
||
|
||
return false;
|
||
}
|
||
#endif /* CPU_COLDFIRE */
|
||
|
||
#ifndef SIMULATOR
|
||
#ifdef HAVE_LCD_BITMAP
|
||
/* Test code!!! */
|
||
bool dbg_ports(void)
|
||
{
|
||
#if CONFIG_CPU == SH7034
|
||
unsigned short porta;
|
||
unsigned short portb;
|
||
unsigned char portc;
|
||
char buf[32];
|
||
int battery_voltage;
|
||
int batt_int, batt_frac;
|
||
|
||
lcd_setfont(FONT_SYSFIXED);
|
||
lcd_setmargins(0, 0);
|
||
lcd_clear_display();
|
||
|
||
while(1)
|
||
{
|
||
porta = PADR;
|
||
portb = PBDR;
|
||
portc = PCDR;
|
||
|
||
snprintf(buf, 32, "PADR: %04x", porta);
|
||
lcd_puts(0, 0, buf);
|
||
snprintf(buf, 32, "PBDR: %04x", portb);
|
||
lcd_puts(0, 1, buf);
|
||
|
||
snprintf(buf, 32, "AN0: %03x AN4: %03x", adc_read(0), adc_read(4));
|
||
lcd_puts(0, 2, buf);
|
||
snprintf(buf, 32, "AN1: %03x AN5: %03x", adc_read(1), adc_read(5));
|
||
lcd_puts(0, 3, buf);
|
||
snprintf(buf, 32, "AN2: %03x AN6: %03x", adc_read(2), adc_read(6));
|
||
lcd_puts(0, 4, buf);
|
||
snprintf(buf, 32, "AN3: %03x AN7: %03x", adc_read(3), adc_read(7));
|
||
lcd_puts(0, 5, buf);
|
||
|
||
battery_voltage = (adc_read(ADC_UNREG_POWER) * BATTERY_SCALE_FACTOR) / 10000;
|
||
batt_int = battery_voltage / 100;
|
||
batt_frac = battery_voltage % 100;
|
||
|
||
snprintf(buf, 32, "Batt: %d.%02dV %d%% ", batt_int, batt_frac,
|
||
battery_level());
|
||
lcd_puts(0, 6, buf);
|
||
#ifndef HAVE_MMC /* have ATA */
|
||
snprintf(buf, 32, "ATA: %s, 0x%x",
|
||
ata_device?"slave":"master", ata_io_address);
|
||
lcd_puts(0, 7, buf);
|
||
#endif
|
||
lcd_update();
|
||
if (action_userabort(HZ/10))
|
||
return false;
|
||
}
|
||
#elif defined(CPU_COLDFIRE)
|
||
unsigned int gpio_out;
|
||
unsigned int gpio1_out;
|
||
unsigned int gpio_read;
|
||
unsigned int gpio1_read;
|
||
unsigned int gpio_function;
|
||
unsigned int gpio1_function;
|
||
unsigned int gpio_enable;
|
||
unsigned int gpio1_enable;
|
||
int adc_buttons, adc_remote, adc_battery;
|
||
#if defined(IRIVER_H100_SERIES) || defined(IRIVER_H300_SERIES)
|
||
int adc_remotedetect;
|
||
#endif
|
||
char buf[128];
|
||
int line;
|
||
int battery_voltage;
|
||
int batt_int, batt_frac;
|
||
|
||
lcd_setmargins(0, 0);
|
||
lcd_clear_display();
|
||
lcd_setfont(FONT_SYSFIXED);
|
||
|
||
while(1)
|
||
{
|
||
line = 0;
|
||
gpio_read = GPIO_READ;
|
||
gpio1_read = GPIO1_READ;
|
||
gpio_out = GPIO_OUT;
|
||
gpio1_out = GPIO1_OUT;
|
||
gpio_function = GPIO_FUNCTION;
|
||
gpio1_function = GPIO1_FUNCTION;
|
||
gpio_enable = GPIO_ENABLE;
|
||
gpio1_enable = GPIO1_ENABLE;
|
||
|
||
snprintf(buf, sizeof(buf), "GPIO_READ: %08x", gpio_read);
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "GPIO_OUT: %08x", gpio_out);
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "GPIO_FUNCTION: %08x", gpio_function);
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "GPIO_ENABLE: %08x", gpio_enable);
|
||
lcd_puts(0, line++, buf);
|
||
|
||
snprintf(buf, sizeof(buf), "GPIO1_READ: %08x", gpio1_read);
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "GPIO1_OUT: %08x", gpio1_out);
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "GPIO1_FUNCTION: %08x", gpio1_function);
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "GPIO1_ENABLE: %08x", gpio1_enable);
|
||
lcd_puts(0, line++, buf);
|
||
|
||
adc_buttons = adc_read(ADC_BUTTONS);
|
||
adc_remote = adc_read(ADC_REMOTE);
|
||
adc_battery = adc_read(ADC_BATTERY);
|
||
#if defined(IRIVER_H100_SERIES) || defined(IRIVER_H300_SERIES)
|
||
adc_remotedetect = adc_read(ADC_REMOTEDETECT);
|
||
#endif
|
||
|
||
snprintf(buf, sizeof(buf), "ADC_BUTTONS: %02x", adc_buttons);
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "ADC_REMOTE: %02x", adc_remote);
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "ADC_BATTERY: %02x", adc_battery);
|
||
lcd_puts(0, line++, buf);
|
||
#if defined(IRIVER_H100_SERIES) || defined(IRIVER_H300_SERIES)
|
||
snprintf(buf, sizeof(buf), "ADC_REMOTEDETECT: %02x", adc_remotedetect);
|
||
lcd_puts(0, line++, buf);
|
||
#endif
|
||
|
||
battery_voltage = (adc_battery * BATTERY_SCALE_FACTOR) / 10000;
|
||
batt_int = battery_voltage / 100;
|
||
batt_frac = battery_voltage % 100;
|
||
|
||
snprintf(buf, 32, "Batt: %d.%02dV %d%% ", batt_int, batt_frac,
|
||
battery_level());
|
||
lcd_puts(0, line++, buf);
|
||
|
||
#if defined(IRIVER_H100_SERIES) || defined(IRIVER_H300_SERIES)
|
||
snprintf(buf, sizeof(buf), "remotetype:: %d", remote_type());
|
||
lcd_puts(0, line++, buf);
|
||
#endif
|
||
|
||
lcd_update();
|
||
if (action_userabort(HZ/10))
|
||
return false;
|
||
}
|
||
|
||
#elif CONFIG_CPU == PP5020
|
||
|
||
unsigned int gpio_a, gpio_b, gpio_c, gpio_d;
|
||
unsigned int gpio_e, gpio_f, gpio_g, gpio_h;
|
||
unsigned int gpio_i, gpio_j, gpio_k, gpio_l;
|
||
|
||
char buf[128];
|
||
int line;
|
||
|
||
lcd_setmargins(0, 0);
|
||
lcd_clear_display();
|
||
lcd_setfont(FONT_SYSFIXED);
|
||
|
||
while(1)
|
||
{
|
||
gpio_a = GPIOA_INPUT_VAL;
|
||
gpio_b = GPIOB_INPUT_VAL;
|
||
gpio_c = GPIOC_INPUT_VAL;
|
||
|
||
gpio_g = GPIOG_INPUT_VAL;
|
||
gpio_h = GPIOH_INPUT_VAL;
|
||
gpio_i = GPIOI_INPUT_VAL;
|
||
|
||
line = 0;
|
||
snprintf(buf, sizeof(buf), "GPIO_A: %02x GPIO_G: %02x", gpio_a, gpio_g);
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "GPIO_B: %02x GPIO_H: %02x", gpio_b, gpio_h);
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "GPIO_C: %02x GPIO_I: %02x", gpio_c, gpio_i);
|
||
lcd_puts(0, line++, buf);
|
||
line++;
|
||
|
||
gpio_d = GPIOD_INPUT_VAL;
|
||
gpio_e = GPIOE_INPUT_VAL;
|
||
gpio_f = GPIOF_INPUT_VAL;
|
||
|
||
gpio_j = GPIOJ_INPUT_VAL;
|
||
gpio_k = GPIOK_INPUT_VAL;
|
||
gpio_l = GPIOL_INPUT_VAL;
|
||
|
||
snprintf(buf, sizeof(buf), "GPIO_D: %02x GPIO_J: %02x", gpio_d, gpio_j);
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "GPIO_E: %02x GPIO_K: %02x", gpio_e, gpio_k);
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "GPIO_F: %02x GPIO_L: %02x", gpio_f, gpio_l);
|
||
lcd_puts(0, line++, buf);
|
||
#if defined(IRIVER_H10) || defined(IRIVER_H10_5GB)
|
||
line++;
|
||
snprintf(buf, sizeof(buf), "ADC_BATTERY: %02x", adc_read(ADC_BATTERY));
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "ADC_UNKNOWN_1: %02x", adc_read(ADC_UNKNOWN_1));
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "ADC_REMOTE: %02x", adc_read(ADC_REMOTE));
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "ADC_SCROLLPAD: %02x", adc_read(ADC_SCROLLPAD));
|
||
lcd_puts(0, line++, buf);
|
||
#endif
|
||
lcd_update();
|
||
if (action_userabort(HZ/10))
|
||
return false;
|
||
}
|
||
|
||
#endif /* CPU */
|
||
return false;
|
||
}
|
||
#else /* !HAVE_LCD_BITMAP */
|
||
bool dbg_ports(void)
|
||
{
|
||
unsigned short porta;
|
||
unsigned short portb;
|
||
unsigned char portc;
|
||
char buf[32];
|
||
int button;
|
||
int battery_voltage;
|
||
int batt_int, batt_frac;
|
||
int currval = 0;
|
||
|
||
lcd_clear_display();
|
||
|
||
while(1)
|
||
{
|
||
porta = PADR;
|
||
portb = PBDR;
|
||
portc = PCDR;
|
||
|
||
switch(currval)
|
||
{
|
||
case 0:
|
||
snprintf(buf, 32, "PADR: %04x ", porta);
|
||
break;
|
||
case 1:
|
||
snprintf(buf, 32, "PBDR: %04x ", portb);
|
||
break;
|
||
case 2:
|
||
snprintf(buf, 32, "AN0: %03x ", adc_read(0));
|
||
break;
|
||
case 3:
|
||
snprintf(buf, 32, "AN1: %03x ", adc_read(1));
|
||
break;
|
||
case 4:
|
||
snprintf(buf, 32, "AN2: %03x ", adc_read(2));
|
||
break;
|
||
case 5:
|
||
snprintf(buf, 32, "AN3: %03x ", adc_read(3));
|
||
break;
|
||
case 6:
|
||
snprintf(buf, 32, "AN4: %03x ", adc_read(4));
|
||
break;
|
||
case 7:
|
||
snprintf(buf, 32, "AN5: %03x ", adc_read(5));
|
||
break;
|
||
case 8:
|
||
snprintf(buf, 32, "AN6: %03x ", adc_read(6));
|
||
break;
|
||
case 9:
|
||
snprintf(buf, 32, "AN7: %03x ", adc_read(7));
|
||
break;
|
||
case 10:
|
||
snprintf(buf, 32, "%s, 0x%x ",
|
||
ata_device?"slv":"mst", ata_io_address);
|
||
break;
|
||
}
|
||
lcd_puts(0, 0, buf);
|
||
|
||
battery_voltage = (adc_read(ADC_UNREG_POWER) *
|
||
BATTERY_SCALE_FACTOR) / 10000;
|
||
batt_int = battery_voltage / 100;
|
||
batt_frac = battery_voltage % 100;
|
||
|
||
snprintf(buf, 32, "Batt: %d.%02dV", batt_int, batt_frac);
|
||
lcd_puts(0, 1, buf);
|
||
|
||
button = get_action(CONTEXT_SETTINGS,HZ/5);
|
||
|
||
switch(button)
|
||
{
|
||
case ACTION_STD_CANCEL:
|
||
action_signalscreenchange();
|
||
return false;
|
||
|
||
case ACTION_SETTINGS_DEC:
|
||
currval--;
|
||
if(currval < 0)
|
||
currval = 10;
|
||
break;
|
||
|
||
case ACTION_SETTINGS_INC:
|
||
currval++;
|
||
if(currval > 10)
|
||
currval = 0;
|
||
break;
|
||
}
|
||
}
|
||
return false;
|
||
}
|
||
#endif /* !HAVE_LCD_BITMAP */
|
||
#endif /* !SIMULATOR */
|
||
|
||
#ifdef HAVE_ADJUSTABLE_CPU_FREQ
|
||
bool dbg_cpufreq(void)
|
||
{
|
||
char buf[128];
|
||
int line;
|
||
int button;
|
||
|
||
#ifdef HAVE_LCD_BITMAP
|
||
lcd_setmargins(0, 0);
|
||
lcd_setfont(FONT_SYSFIXED);
|
||
#endif
|
||
lcd_clear_display();
|
||
|
||
while(1)
|
||
{
|
||
line = 0;
|
||
|
||
snprintf(buf, sizeof(buf), "Frequency: %ld", FREQ);
|
||
lcd_puts(0, line++, buf);
|
||
|
||
#ifdef CPU_BOOST_TRACKING
|
||
snprintf(buf, sizeof(buf), "boost_counter: %d %s", get_cpu_boost_counter(), get_cpu_boost_tracker());
|
||
#else
|
||
snprintf(buf, sizeof(buf), "boost_counter: %d", get_cpu_boost_counter());
|
||
#endif
|
||
lcd_puts(0, line++, buf);
|
||
|
||
lcd_update();
|
||
button = get_action(CONTEXT_STD,HZ/10);
|
||
|
||
switch(button)
|
||
{
|
||
case ACTION_STD_PREV:
|
||
cpu_boost_id(true, CPUBOOSTID_DEBUGMENU_MANUAL);
|
||
break;
|
||
|
||
case ACTION_STD_NEXT:
|
||
cpu_boost_id(false, CPUBOOSTID_DEBUGMENU_MANUAL);
|
||
break;
|
||
|
||
case ACTION_STD_OK:
|
||
while (get_cpu_boost_counter() > 0)
|
||
cpu_boost_id(false, CPUBOOSTID_DEBUGMENU_MANUAL);
|
||
break;
|
||
|
||
case ACTION_STD_CANCEL:
|
||
action_signalscreenchange();
|
||
return false;
|
||
}
|
||
}
|
||
|
||
return false;
|
||
}
|
||
#endif /* HAVE_ADJUSTABLE_CPU_FREQ */
|
||
|
||
#ifndef SIMULATOR
|
||
#ifdef HAVE_LCD_BITMAP
|
||
/*
|
||
* view_battery() shows a automatically scaled graph of the battery voltage
|
||
* over time. Usable for estimating battery life / charging rate.
|
||
* The power_history array is updated in power_thread of powermgmt.c.
|
||
*/
|
||
|
||
#define BAT_LAST_VAL MIN(LCD_WIDTH, POWER_HISTORY_LEN)
|
||
#define BAT_YSPACE (LCD_HEIGHT - 20)
|
||
|
||
bool view_battery(void)
|
||
{
|
||
int view = 0;
|
||
int i, x, y;
|
||
unsigned short maxv, minv;
|
||
char buf[32];
|
||
|
||
lcd_setmargins(0, 0);
|
||
lcd_setfont(FONT_SYSFIXED);
|
||
|
||
while(1)
|
||
{
|
||
switch (view) {
|
||
case 0: /* voltage history graph */
|
||
/* Find maximum and minimum voltage for scaling */
|
||
maxv = 0;
|
||
minv = 65535;
|
||
for (i = 0; i < BAT_LAST_VAL; i++) {
|
||
if (power_history[i] > maxv)
|
||
maxv = power_history[i];
|
||
if (power_history[i] && (power_history[i] < minv))
|
||
{
|
||
minv = power_history[i];
|
||
}
|
||
}
|
||
|
||
if ((minv < 1) || (minv >= 65535))
|
||
minv = 1;
|
||
if (maxv < 2)
|
||
maxv = 2;
|
||
if (minv == maxv)
|
||
maxv < 65535 ? maxv++ : minv--;
|
||
|
||
lcd_clear_display();
|
||
snprintf(buf, 30, "Battery %d.%02d", power_history[0] / 100,
|
||
power_history[0] % 100);
|
||
lcd_puts(0, 0, buf);
|
||
snprintf(buf, 30, "scale %d.%02d-%d.%02d V",
|
||
minv / 100, minv % 100, maxv / 100, maxv % 100);
|
||
lcd_puts(0, 1, buf);
|
||
|
||
x = 0;
|
||
for (i = BAT_LAST_VAL - 1; i >= 0; i--) {
|
||
y = (power_history[i] - minv) * BAT_YSPACE / (maxv - minv);
|
||
lcd_set_drawmode(DRMODE_SOLID|DRMODE_INVERSEVID);
|
||
lcd_vline(x, LCD_HEIGHT-1, 20);
|
||
lcd_set_drawmode(DRMODE_SOLID);
|
||
lcd_vline(x, LCD_HEIGHT-1,
|
||
MIN(MAX(LCD_HEIGHT-1 - y, 20), LCD_HEIGHT-1));
|
||
x++;
|
||
}
|
||
|
||
break;
|
||
|
||
case 1: /* status: */
|
||
lcd_clear_display();
|
||
lcd_puts(0, 0, "Power status:");
|
||
|
||
y = (adc_read(ADC_UNREG_POWER) * BATTERY_SCALE_FACTOR) / 10000;
|
||
snprintf(buf, 30, "Battery: %d.%02d V", y / 100, y % 100);
|
||
lcd_puts(0, 1, buf);
|
||
#ifdef ADC_EXT_POWER
|
||
y = (adc_read(ADC_EXT_POWER) * EXT_SCALE_FACTOR) / 10000;
|
||
snprintf(buf, 30, "External: %d.%02d V", y / 100, y % 100);
|
||
lcd_puts(0, 2, buf);
|
||
#endif
|
||
#ifdef CONFIG_CHARGING
|
||
#if CONFIG_CHARGING == CHARGING_CONTROL
|
||
snprintf(buf, 30, "Chgr: %s %s",
|
||
charger_inserted() ? "present" : "absent",
|
||
charger_enabled ? "on" : "off");
|
||
lcd_puts(0, 3, buf);
|
||
snprintf(buf, 30, "short delta: %d", short_delta);
|
||
lcd_puts(0, 5, buf);
|
||
snprintf(buf, 30, "long delta: %d", long_delta);
|
||
lcd_puts(0, 6, buf);
|
||
lcd_puts(0, 7, power_message);
|
||
#else /* CONFIG_CHARGING != CHARGING_CONTROL */
|
||
#if defined IPOD_NANO || defined IPOD_VIDEO
|
||
int usb_pwr = (GPIOL_INPUT_VAL & 0x10)?true:false;
|
||
int ext_pwr = (GPIOL_INPUT_VAL & 0x08)?false:true;
|
||
int dock = (GPIOA_INPUT_VAL & 0x10)?true:false;
|
||
int charging = (GPIOB_INPUT_VAL & 0x01)?false:true;
|
||
int headphone= (GPIOA_INPUT_VAL & 0x80)?true:false;
|
||
|
||
snprintf(buf, 30, "USB pwr: %s",
|
||
usb_pwr ? "present" : "absent");
|
||
lcd_puts(0, 3, buf);
|
||
snprintf(buf, 30, "EXT pwr: %s",
|
||
ext_pwr ? "present" : "absent");
|
||
lcd_puts(0, 4, buf);
|
||
snprintf(buf, 30, "Battery: %s",
|
||
charging ? "charging" : (usb_pwr||ext_pwr) ? "charged" : "discharging");
|
||
lcd_puts(0, 5, buf);
|
||
snprintf(buf, 30, "Dock mode: %s",
|
||
dock ? "enabled" : "disabled");
|
||
lcd_puts(0, 6, buf);
|
||
snprintf(buf, 30, "Headphone: %s",
|
||
headphone ? "connected" : "disconnected");
|
||
lcd_puts(0, 7, buf);
|
||
#else
|
||
snprintf(buf, 30, "Charger: %s",
|
||
charger_inserted() ? "present" : "absent");
|
||
lcd_puts(0, 3, buf);
|
||
#endif
|
||
#endif /* CONFIG_CHARGING != CHARGING_CONTROL */
|
||
#endif /* CONFIG_CHARGING */
|
||
break;
|
||
|
||
case 2: /* voltage deltas: */
|
||
lcd_clear_display();
|
||
lcd_puts(0, 0, "Voltage deltas:");
|
||
|
||
for (i = 0; i <= 6; i++) {
|
||
y = power_history[i] - power_history[i+i];
|
||
snprintf(buf, 30, "-%d min: %s%d.%02d V", i,
|
||
(y < 0) ? "-" : "", ((y < 0) ? y * -1 : y) / 100,
|
||
((y < 0) ? y * -1 : y ) % 100);
|
||
lcd_puts(0, i+1, buf);
|
||
}
|
||
break;
|
||
|
||
case 3: /* remaining time estimation: */
|
||
lcd_clear_display();
|
||
|
||
#if CONFIG_CHARGING == CHARGING_CONTROL
|
||
snprintf(buf, 30, "charge_state: %d", charge_state);
|
||
lcd_puts(0, 0, buf);
|
||
|
||
snprintf(buf, 30, "Cycle time: %d m", powermgmt_last_cycle_startstop_min);
|
||
lcd_puts(0, 1, buf);
|
||
|
||
snprintf(buf, 30, "Lvl@cyc st: %d%%", powermgmt_last_cycle_level);
|
||
lcd_puts(0, 2, buf);
|
||
|
||
snprintf(buf, 30, "P=%2d I=%2d", pid_p, pid_i);
|
||
lcd_puts(0, 3, buf);
|
||
|
||
snprintf(buf, 30, "Trickle sec: %d/60", trickle_sec);
|
||
lcd_puts(0, 4, buf);
|
||
#endif /* CONFIG_CHARGING == CHARGING_CONTROL */
|
||
|
||
snprintf(buf, 30, "Last PwrHist: %d.%02d V",
|
||
power_history[0] / 100,
|
||
power_history[0] % 100);
|
||
lcd_puts(0, 5, buf);
|
||
|
||
snprintf(buf, 30, "battery level: %d%%", battery_level());
|
||
lcd_puts(0, 6, buf);
|
||
|
||
snprintf(buf, 30, "Est. remain: %d m", battery_time());
|
||
lcd_puts(0, 7, buf);
|
||
break;
|
||
}
|
||
|
||
lcd_update();
|
||
|
||
switch(get_action(CONTEXT_SETTINGS,HZ/2))
|
||
{
|
||
case ACTION_SETTINGS_DEC:
|
||
if (view)
|
||
view--;
|
||
break;
|
||
|
||
case ACTION_SETTINGS_INC:
|
||
if (view < 3)
|
||
view++;
|
||
break;
|
||
|
||
case ACTION_STD_CANCEL:
|
||
action_signalscreenchange();
|
||
return false;
|
||
}
|
||
}
|
||
return false;
|
||
}
|
||
|
||
#endif /* HAVE_LCD_BITMAP */
|
||
#endif
|
||
|
||
static bool view_runtime(void)
|
||
{
|
||
char s[32];
|
||
bool done = false;
|
||
int state = 1;
|
||
|
||
while(!done)
|
||
{
|
||
int y=0;
|
||
int t;
|
||
int key;
|
||
lcd_clear_display();
|
||
#ifdef HAVE_LCD_BITMAP
|
||
lcd_puts(0, y++, "Running time:");
|
||
y++;
|
||
#endif
|
||
|
||
if (state & 1) {
|
||
#ifdef CONFIG_CHARGING
|
||
if (charger_inserted()
|
||
#ifdef HAVE_USB_POWER
|
||
|| usb_powered()
|
||
#endif
|
||
)
|
||
{
|
||
global_settings.runtime = 0;
|
||
}
|
||
else
|
||
#endif
|
||
{
|
||
global_settings.runtime += ((current_tick - lasttime) / HZ);
|
||
}
|
||
lasttime = current_tick;
|
||
|
||
t = global_settings.runtime;
|
||
lcd_puts(0, y++, "Current time");
|
||
}
|
||
else {
|
||
t = global_settings.topruntime;
|
||
lcd_puts(0, y++, "Top time");
|
||
}
|
||
|
||
snprintf(s, sizeof(s), "%dh %dm %ds",
|
||
t / 3600, (t % 3600) / 60, t % 60);
|
||
lcd_puts(0, y++, s);
|
||
lcd_update();
|
||
|
||
/* Wait for a key to be pushed */
|
||
key = get_action(CONTEXT_SETTINGS,HZ);
|
||
switch(key) {
|
||
case ACTION_STD_CANCEL:
|
||
done = true;
|
||
break;
|
||
|
||
case ACTION_SETTINGS_INC:
|
||
case ACTION_SETTINGS_DEC:
|
||
if (state == 1)
|
||
state = 2;
|
||
else
|
||
state = 1;
|
||
break;
|
||
|
||
case ACTION_STD_OK:
|
||
lcd_clear_display();
|
||
/*NOTE: this needs to be changed to sync splash! */
|
||
lcd_puts(0,0,"Clear time?");
|
||
lcd_puts(0,1,"PLAY = Yes");
|
||
lcd_update();
|
||
while (1) {
|
||
key = get_action(CONTEXT_STD,TIMEOUT_BLOCK);
|
||
if ( key == ACTION_STD_OK ) {
|
||
if ( state == 1 )
|
||
global_settings.runtime = 0;
|
||
else
|
||
global_settings.topruntime = 0;
|
||
break;
|
||
}
|
||
}
|
||
break;
|
||
}
|
||
}
|
||
action_signalscreenchange();
|
||
return false;
|
||
}
|
||
|
||
#ifndef SIMULATOR
|
||
#ifdef HAVE_MMC
|
||
bool dbg_mmc_info(void)
|
||
{
|
||
bool done = false;
|
||
int currval = 0;
|
||
tCardInfo *card;
|
||
unsigned char pbuf[32], pbuf2[32];
|
||
unsigned char card_name[7];
|
||
|
||
static const unsigned char i_vmin[] = { 0, 1, 5, 10, 25, 35, 60, 100 };
|
||
static const unsigned char i_vmax[] = { 1, 5, 10, 25, 35, 45, 80, 200 };
|
||
static const unsigned char *kbit_units[] = { "kBit/s", "MBit/s", "GBit/s" };
|
||
static const unsigned char *nsec_units[] = { "ns", "<EFBFBD>s", "ms" };
|
||
|
||
card_name[6] = '\0';
|
||
|
||
lcd_setmargins(0, 0);
|
||
lcd_setfont(FONT_SYSFIXED);
|
||
|
||
while (!done)
|
||
{
|
||
card = mmc_card_info(currval / 2);
|
||
|
||
lcd_clear_display();
|
||
snprintf(pbuf, sizeof(pbuf), "[MMC%d p%d]", currval / 2,
|
||
(currval % 2) + 1);
|
||
lcd_puts(0, 0, pbuf);
|
||
|
||
if (card->initialized)
|
||
{
|
||
if (!(currval % 2)) /* General info */
|
||
{
|
||
strncpy(card_name, ((unsigned char*)card->cid) + 3, 6);
|
||
snprintf(pbuf, sizeof(pbuf), "%s Rev %d.%d", card_name,
|
||
(int) mmc_extract_bits(card->cid, 72, 4),
|
||
(int) mmc_extract_bits(card->cid, 76, 4));
|
||
lcd_puts(0, 1, pbuf);
|
||
snprintf(pbuf, sizeof(pbuf), "Prod: %d/%d",
|
||
(int) mmc_extract_bits(card->cid, 112, 4),
|
||
(int) mmc_extract_bits(card->cid, 116, 4) + 1997);
|
||
lcd_puts(0, 2, pbuf);
|
||
snprintf(pbuf, sizeof(pbuf), "Ser#: 0x%08lx",
|
||
mmc_extract_bits(card->cid, 80, 32));
|
||
lcd_puts(0, 3, pbuf);
|
||
snprintf(pbuf, sizeof(pbuf), "M=%02x, O=%04x",
|
||
(int) mmc_extract_bits(card->cid, 0, 8),
|
||
(int) mmc_extract_bits(card->cid, 8, 16));
|
||
lcd_puts(0, 4, pbuf);
|
||
snprintf(pbuf, sizeof(pbuf), "Blocks: 0x%06lx", card->numblocks);
|
||
lcd_puts(0, 5, pbuf);
|
||
snprintf(pbuf, sizeof(pbuf), "Blksz.: %d", card->blocksize);
|
||
lcd_puts(0, 6, pbuf);
|
||
}
|
||
else /* Technical details */
|
||
{
|
||
output_dyn_value(pbuf2, sizeof pbuf2, card->speed / 1000,
|
||
kbit_units, false);
|
||
snprintf(pbuf, sizeof pbuf, "Speed: %s", pbuf2);
|
||
lcd_puts(0, 1, pbuf);
|
||
|
||
output_dyn_value(pbuf2, sizeof pbuf2, card->tsac,
|
||
nsec_units, false);
|
||
snprintf(pbuf, sizeof pbuf, "Tsac: %s", pbuf2);
|
||
lcd_puts(0, 2, pbuf);
|
||
|
||
snprintf(pbuf, sizeof(pbuf), "Nsac: %d clk", card->nsac);
|
||
lcd_puts(0, 3, pbuf);
|
||
snprintf(pbuf, sizeof(pbuf), "R2W: *%d", card->r2w_factor);
|
||
lcd_puts(0, 4, pbuf);
|
||
snprintf(pbuf, sizeof(pbuf), "IRmax: %d..%d mA",
|
||
i_vmin[mmc_extract_bits(card->csd, 66, 3)],
|
||
i_vmax[mmc_extract_bits(card->csd, 69, 3)]);
|
||
lcd_puts(0, 5, pbuf);
|
||
snprintf(pbuf, sizeof(pbuf), "IWmax: %d..%d mA",
|
||
i_vmin[mmc_extract_bits(card->csd, 72, 3)],
|
||
i_vmax[mmc_extract_bits(card->csd, 75, 3)]);
|
||
lcd_puts(0, 6, pbuf);
|
||
}
|
||
}
|
||
else
|
||
lcd_puts(0, 1, "Not found!");
|
||
|
||
lcd_update();
|
||
|
||
switch (get_action(CONTEXT_SETTINGS,HZ/2))
|
||
{
|
||
case ACTION_STD_CANCEL:
|
||
done = true;
|
||
break;
|
||
|
||
case ACTION_SETTINGS_DEC:
|
||
currval--;
|
||
if (currval < 0)
|
||
currval = 3;
|
||
break;
|
||
|
||
case ACTION_SETTINGS_INC:
|
||
currval++;
|
||
if (currval > 3)
|
||
currval = 0;
|
||
break;
|
||
}
|
||
}
|
||
action_signalscreenchange();
|
||
return false;
|
||
}
|
||
#else /* !HAVE_MMC */
|
||
static bool dbg_disk_info(void)
|
||
{
|
||
char buf[128];
|
||
bool done = false;
|
||
int i;
|
||
int page = 0;
|
||
const int max_page = 11;
|
||
unsigned short* identify_info = ata_get_identify();
|
||
bool timing_info_present = false;
|
||
char pio3[2], pio4[2];
|
||
|
||
#ifdef HAVE_LCD_BITMAP
|
||
lcd_setmargins(0, 0);
|
||
#endif
|
||
|
||
while(!done)
|
||
{
|
||
int y=0;
|
||
int key;
|
||
lcd_clear_display();
|
||
#ifdef HAVE_LCD_BITMAP
|
||
lcd_puts(0, y++, "Disk info:");
|
||
y++;
|
||
#endif
|
||
|
||
switch (page) {
|
||
case 0:
|
||
for (i=0; i < 20; i++)
|
||
((unsigned short*)buf)[i]=htobe16(identify_info[i+27]);
|
||
buf[40]=0;
|
||
/* kill trailing space */
|
||
for (i=39; i && buf[i]==' '; i--)
|
||
buf[i] = 0;
|
||
lcd_puts(0, y++, "Model");
|
||
lcd_puts_scroll(0, y++, buf);
|
||
break;
|
||
|
||
case 1:
|
||
for (i=0; i < 4; i++)
|
||
((unsigned short*)buf)[i]=htobe16(identify_info[i+23]);
|
||
buf[8]=0;
|
||
lcd_puts(0, y++, "Firmware");
|
||
lcd_puts(0, y++, buf);
|
||
break;
|
||
|
||
case 2:
|
||
snprintf(buf, sizeof buf, "%ld MB",
|
||
((unsigned long)identify_info[61] << 16 |
|
||
(unsigned long)identify_info[60]) / 2048 );
|
||
lcd_puts(0, y++, "Size");
|
||
lcd_puts(0, y++, buf);
|
||
break;
|
||
|
||
case 3: {
|
||
unsigned long free;
|
||
fat_size( IF_MV2(0,) NULL, &free );
|
||
snprintf(buf, sizeof buf, "%ld MB", free / 1024 );
|
||
lcd_puts(0, y++, "Free");
|
||
lcd_puts(0, y++, buf);
|
||
break;
|
||
}
|
||
|
||
case 4:
|
||
snprintf(buf, sizeof buf, "%d ms", ata_spinup_time * (1000/HZ));
|
||
lcd_puts(0, y++, "Spinup time");
|
||
lcd_puts(0, y++, buf);
|
||
break;
|
||
|
||
case 5:
|
||
i = identify_info[83] & (1<<3);
|
||
lcd_puts(0, y++, "Power mgmt:");
|
||
lcd_puts(0, y++, i ? "enabled" : "unsupported");
|
||
break;
|
||
|
||
case 6:
|
||
i = identify_info[83] & (1<<9);
|
||
lcd_puts(0, y++, "Noise mgmt:");
|
||
lcd_puts(0, y++, i ? "enabled" : "unsupported");
|
||
break;
|
||
|
||
case 7:
|
||
i = identify_info[82] & (1<<6);
|
||
lcd_puts(0, y++, "Read-ahead:");
|
||
lcd_puts(0, y++, i ? "enabled" : "unsupported");
|
||
break;
|
||
|
||
case 8:
|
||
timing_info_present = identify_info[53] & (1<<1);
|
||
if(timing_info_present) {
|
||
pio3[1] = 0;
|
||
pio4[1] = 0;
|
||
lcd_puts(0, y++, "PIO modes:");
|
||
pio3[0] = (identify_info[64] & (1<<0)) ? '3' : 0;
|
||
pio4[0] = (identify_info[64] & (1<<1)) ? '4' : 0;
|
||
snprintf(buf, 128, "0 1 2 %s %s", pio3, pio4);
|
||
lcd_puts(0, y++, buf);
|
||
} else {
|
||
lcd_puts(0, y++, "No PIO mode info");
|
||
}
|
||
break;
|
||
|
||
case 9:
|
||
timing_info_present = identify_info[53] & (1<<1);
|
||
if(timing_info_present) {
|
||
lcd_puts(0, y++, "Cycle times");
|
||
snprintf(buf, 128, "%dns/%dns",
|
||
identify_info[67],
|
||
identify_info[68]);
|
||
lcd_puts(0, y++, buf);
|
||
} else {
|
||
lcd_puts(0, y++, "No timing info");
|
||
}
|
||
break;
|
||
|
||
case 10:
|
||
timing_info_present = identify_info[53] & (1<<1);
|
||
if(timing_info_present) {
|
||
i = identify_info[49] & (1<<11);
|
||
snprintf(buf, 128, "IORDY support: %s", i ? "yes" : "no");
|
||
lcd_puts(0, y++, buf);
|
||
i = identify_info[49] & (1<<10);
|
||
snprintf(buf, 128, "IORDY disable: %s", i ? "yes" : "no");
|
||
lcd_puts(0, y++, buf);
|
||
} else {
|
||
lcd_puts(0, y++, "No timing info");
|
||
}
|
||
break;
|
||
|
||
case 11:
|
||
lcd_puts(0, y++, "Cluster size");
|
||
snprintf(buf, 128, "%d bytes", fat_get_cluster_size(IF_MV(0)));
|
||
lcd_puts(0, y++, buf);
|
||
break;
|
||
}
|
||
lcd_update();
|
||
|
||
/* Wait for a key to be pushed */
|
||
key = get_action(CONTEXT_SETTINGS,HZ/5);
|
||
switch(key) {
|
||
case ACTION_STD_CANCEL:
|
||
done = true;
|
||
break;
|
||
|
||
case ACTION_SETTINGS_DEC:
|
||
if (--page < 0)
|
||
page = max_page;
|
||
break;
|
||
|
||
case ACTION_SETTINGS_INC:
|
||
if (++page > max_page)
|
||
page = 0;
|
||
break;
|
||
}
|
||
lcd_stop_scroll();
|
||
}
|
||
action_signalscreenchange();
|
||
return false;
|
||
}
|
||
#endif /* !HAVE_MMC */
|
||
#endif /* !SIMULATOR */
|
||
|
||
#ifdef HAVE_DIRCACHE
|
||
static bool dbg_dircache_info(void)
|
||
{
|
||
bool done = false;
|
||
int line;
|
||
char buf[32];
|
||
|
||
lcd_setmargins(0, 0);
|
||
lcd_setfont(FONT_SYSFIXED);
|
||
|
||
while (!done)
|
||
{
|
||
line = 0;
|
||
|
||
lcd_clear_display();
|
||
snprintf(buf, sizeof(buf), "Cache initialized: %s",
|
||
dircache_is_enabled() ? "Yes" : "No");
|
||
lcd_puts(0, line++, buf);
|
||
|
||
snprintf(buf, sizeof(buf), "Cache size: %d B",
|
||
dircache_get_cache_size());
|
||
lcd_puts(0, line++, buf);
|
||
|
||
snprintf(buf, sizeof(buf), "Last size: %d B",
|
||
global_settings.dircache_size);
|
||
lcd_puts(0, line++, buf);
|
||
|
||
snprintf(buf, sizeof(buf), "Limit: %d B", DIRCACHE_LIMIT);
|
||
lcd_puts(0, line++, buf);
|
||
|
||
snprintf(buf, sizeof(buf), "Reserve: %d/%d B",
|
||
dircache_get_reserve_used(), DIRCACHE_RESERVE);
|
||
lcd_puts(0, line++, buf);
|
||
|
||
snprintf(buf, sizeof(buf), "Scanning took: %d s",
|
||
dircache_get_build_ticks() / HZ);
|
||
lcd_puts(0, line++, buf);
|
||
|
||
snprintf(buf, sizeof(buf), "Entry count: %d",
|
||
dircache_get_entry_count());
|
||
lcd_puts(0, line++, buf);
|
||
|
||
lcd_update();
|
||
|
||
if (action_userabort(HZ/2))
|
||
return false;
|
||
}
|
||
|
||
return false;
|
||
}
|
||
|
||
#endif /* HAVE_DIRCACHE */
|
||
|
||
#ifdef HAVE_LCD_BITMAP
|
||
static bool dbg_tagcache_info(void)
|
||
{
|
||
bool done = false;
|
||
int line;
|
||
char buf[32];
|
||
struct tagcache_stat *stat;
|
||
|
||
lcd_setmargins(0, 0);
|
||
lcd_setfont(FONT_SYSFIXED);
|
||
|
||
while (!done)
|
||
{
|
||
line = 0;
|
||
|
||
lcd_clear_display();
|
||
stat = tagcache_get_stat();
|
||
snprintf(buf, sizeof(buf), "Initialized: %s", stat->initialized ? "Yes" : "No");
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "DB Ready: %s", stat->ready ? "Yes" : "No");
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "RAM Cache: %s", stat->ramcache ? "Yes" : "No");
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "RAM: %d/%d B",
|
||
stat->ramcache_used, stat->ramcache_allocated);
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "Progress: %d%% (%d entries)",
|
||
stat->progress, stat->processed_entries);
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "Commit step: %d", stat->commit_step);
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "Commit delayed: %s",
|
||
stat->commit_delayed ? "Yes" : "No");
|
||
lcd_puts(0, line++, buf);
|
||
|
||
lcd_update();
|
||
|
||
if (action_userabort(HZ/2))
|
||
return false;
|
||
}
|
||
|
||
return false;
|
||
}
|
||
#endif
|
||
|
||
#if CONFIG_CPU == SH7034
|
||
bool dbg_save_roms(void)
|
||
{
|
||
int fd;
|
||
int oldmode = system_memory_guard(MEMGUARD_NONE);
|
||
|
||
fd = creat("/internal_rom_0000-FFFF.bin", O_WRONLY);
|
||
if(fd >= 0)
|
||
{
|
||
write(fd, (void *)0, 0x10000);
|
||
close(fd);
|
||
}
|
||
|
||
fd = creat("/internal_rom_2000000-203FFFF.bin", O_WRONLY);
|
||
if(fd >= 0)
|
||
{
|
||
write(fd, (void *)0x2000000, 0x40000);
|
||
close(fd);
|
||
}
|
||
|
||
system_memory_guard(oldmode);
|
||
return false;
|
||
}
|
||
#elif defined CPU_COLDFIRE
|
||
bool dbg_save_roms(void)
|
||
{
|
||
int fd;
|
||
int oldmode = system_memory_guard(MEMGUARD_NONE);
|
||
|
||
#if defined(IRIVER_H100_SERIES)
|
||
fd = creat("/internal_rom_000000-1FFFFF.bin", O_WRONLY);
|
||
#elif defined(IRIVER_H300_SERIES)
|
||
fd = creat("/internal_rom_000000-3FFFFF.bin", O_WRONLY);
|
||
#elif defined(IAUDIO_X5)
|
||
fd = creat("/internal_rom_000000-3FFFFF.bin", O_WRONLY);
|
||
#endif
|
||
if(fd >= 0)
|
||
{
|
||
write(fd, (void *)0, FLASH_SIZE);
|
||
close(fd);
|
||
}
|
||
system_memory_guard(oldmode);
|
||
|
||
#ifdef HAVE_EEPROM
|
||
fd = creat("/internal_eeprom.bin", O_WRONLY);
|
||
if (fd >= 0)
|
||
{
|
||
int old_irq_level;
|
||
char buf[EEPROM_SIZE];
|
||
int err;
|
||
|
||
old_irq_level = set_irq_level(HIGHEST_IRQ_LEVEL);
|
||
|
||
err = eeprom_24cxx_read(0, buf, sizeof buf);
|
||
if (err)
|
||
gui_syncsplash(HZ*3, true, "Eeprom read failure (%d)",err);
|
||
else
|
||
{
|
||
write(fd, buf, sizeof buf);
|
||
}
|
||
|
||
set_irq_level(old_irq_level);
|
||
|
||
close(fd);
|
||
}
|
||
#endif
|
||
|
||
return false;
|
||
}
|
||
#endif /* CPU */
|
||
|
||
#ifndef SIMULATOR
|
||
#ifdef CONFIG_TUNER
|
||
bool dbg_fm_radio(void)
|
||
{
|
||
char buf[32];
|
||
bool fm_detected;
|
||
|
||
#ifdef HAVE_LCD_BITMAP
|
||
lcd_setmargins(0, 0);
|
||
#endif
|
||
|
||
while(1)
|
||
{
|
||
int row = 0;
|
||
unsigned long regs;
|
||
|
||
lcd_clear_display();
|
||
fm_detected = radio_hardware_present();
|
||
|
||
snprintf(buf, sizeof buf, "HW detected: %s", fm_detected?"yes":"no");
|
||
lcd_puts(0, row++, buf);
|
||
|
||
#if (CONFIG_TUNER & S1A0903X01)
|
||
regs = samsung_get(RADIO_ALL);
|
||
snprintf(buf, sizeof buf, "Samsung regs: %08lx", regs);
|
||
lcd_puts(0, row++, buf);
|
||
#endif
|
||
#if (CONFIG_TUNER & TEA5767)
|
||
regs = philips_get(RADIO_ALL);
|
||
snprintf(buf, sizeof buf, "Philips regs: %08lx", regs);
|
||
lcd_puts(0, row++, buf);
|
||
#endif
|
||
|
||
lcd_update();
|
||
|
||
if (action_userabort(HZ))
|
||
return false;
|
||
}
|
||
return false;
|
||
}
|
||
#endif /* CONFIG_TUNER */
|
||
#endif /* !SIMULATOR */
|
||
|
||
#ifdef HAVE_LCD_BITMAP
|
||
extern bool do_screendump_instead_of_usb;
|
||
|
||
bool dbg_screendump(void)
|
||
{
|
||
do_screendump_instead_of_usb = !do_screendump_instead_of_usb;
|
||
gui_syncsplash(HZ, true, "Screendump %s",
|
||
do_screendump_instead_of_usb?"enabled":"disabled");
|
||
return false;
|
||
}
|
||
#endif /* HAVE_LCD_BITMAP */
|
||
|
||
#if CONFIG_CPU == SH7034 || defined(CPU_COLDFIRE)
|
||
bool dbg_set_memory_guard(void)
|
||
{
|
||
static const struct opt_items names[MAXMEMGUARD] = {
|
||
{ "None", -1 },
|
||
{ "Flash ROM writes", -1 },
|
||
{ "Zero area (all)", -1 }
|
||
};
|
||
int mode = system_memory_guard(MEMGUARD_KEEP);
|
||
|
||
set_option( "Catch mem accesses", &mode, INT, names, MAXMEMGUARD, NULL);
|
||
system_memory_guard(mode);
|
||
|
||
return false;
|
||
}
|
||
#endif /* CONFIG_CPU == SH7034 || defined(CPU_COLDFIRE) */
|
||
|
||
#if defined(HAVE_EEPROM) && !defined(HAVE_EEPROM_SETTINGS)
|
||
bool dbg_write_eeprom(void)
|
||
{
|
||
int fd;
|
||
int rc;
|
||
int old_irq_level;
|
||
char buf[EEPROM_SIZE];
|
||
int err;
|
||
|
||
fd = open("/internal_eeprom.bin", O_RDONLY);
|
||
|
||
if (fd >= 0)
|
||
{
|
||
rc = read(fd, buf, EEPROM_SIZE);
|
||
|
||
if(rc == EEPROM_SIZE)
|
||
{
|
||
old_irq_level = set_irq_level(HIGHEST_IRQ_LEVEL);
|
||
|
||
err = eeprom_24cxx_write(0, buf, sizeof buf);
|
||
if (err)
|
||
gui_syncsplash(HZ*3, true, "Eeprom write failure (%d)",err);
|
||
else
|
||
gui_syncsplash(HZ*3, true, "Eeprom written successfully");
|
||
|
||
set_irq_level(old_irq_level);
|
||
}
|
||
else
|
||
{
|
||
gui_syncsplash(HZ*3, true, "File read error (%d)",rc);
|
||
}
|
||
close(fd);
|
||
}
|
||
else
|
||
{
|
||
gui_syncsplash(HZ*3, true, "Failed to open 'internal_eeprom.bin'");
|
||
}
|
||
|
||
return false;
|
||
}
|
||
#endif /* defined(HAVE_EEPROM) && !defined(HAVE_EEPROM_SETTINGS) */
|
||
|
||
bool debug_menu(void)
|
||
{
|
||
int m;
|
||
bool result;
|
||
|
||
static const struct menu_item items[] = {
|
||
#if CONFIG_CPU == SH7034 || defined(CPU_COLDFIRE)
|
||
{ "Dump ROM contents", dbg_save_roms },
|
||
#endif
|
||
#if CONFIG_CPU == SH7034 || defined(CPU_COLDFIRE) || (CONFIG_CPU == PP5020)
|
||
{ "View I/O ports", dbg_ports },
|
||
#endif
|
||
#ifdef HAVE_ADJUSTABLE_CPU_FREQ
|
||
{ "CPU frequency", dbg_cpufreq },
|
||
#endif
|
||
#if defined(IRIVER_H100_SERIES) && !defined(SIMULATOR)
|
||
{ "S/PDIF analyzer", dbg_spdif },
|
||
#endif
|
||
#if CONFIG_CPU == SH7034 || defined(CPU_COLDFIRE)
|
||
{ "Catch mem accesses", dbg_set_memory_guard },
|
||
#endif
|
||
#ifndef SIMULATOR
|
||
{ "View OS stacks", dbg_os },
|
||
#endif
|
||
#ifdef HAVE_LCD_BITMAP
|
||
#ifndef SIMULATOR
|
||
{ "View battery", view_battery },
|
||
#endif
|
||
{ "Screendump", dbg_screendump },
|
||
#endif
|
||
#ifndef SIMULATOR
|
||
{ "View HW info", dbg_hw_info },
|
||
#endif
|
||
#ifndef SIMULATOR
|
||
{ "View partitions", dbg_partitions },
|
||
#endif
|
||
#ifndef SIMULATOR
|
||
#ifdef HAVE_MMC
|
||
{ "View MMC info", dbg_mmc_info },
|
||
#else
|
||
{ "View disk info", dbg_disk_info },
|
||
#endif
|
||
#endif
|
||
#ifdef HAVE_DIRCACHE
|
||
{ "View dircache info", dbg_dircache_info },
|
||
#endif
|
||
#ifdef HAVE_LCD_BITMAP
|
||
{ "View tagcache info", dbg_tagcache_info },
|
||
#if CONFIG_CODEC == SWCODEC || !defined(SIMULATOR)
|
||
{ "View audio thread", dbg_audio_thread },
|
||
#endif
|
||
#ifdef PM_DEBUG
|
||
{ "pm histogram", peak_meter_histogram},
|
||
#endif /* PM_DEBUG */
|
||
#endif /* HAVE_LCD_BITMAP */
|
||
{ "View runtime", view_runtime },
|
||
#ifndef SIMULATOR
|
||
#ifdef CONFIG_TUNER
|
||
{ "FM Radio", dbg_fm_radio },
|
||
#endif
|
||
#endif
|
||
#if defined(HAVE_EEPROM) && !defined(HAVE_EEPROM_SETTINGS)
|
||
{ "Write back EEPROM", dbg_write_eeprom },
|
||
#endif
|
||
#ifdef ROCKBOX_HAS_LOGF
|
||
{"logf", logfdisplay },
|
||
{"logfdump", logfdump },
|
||
#endif
|
||
};
|
||
|
||
m=menu_init( items, sizeof items / sizeof(struct menu_item), NULL,
|
||
NULL, NULL, NULL);
|
||
result = menu_run(m);
|
||
menu_exit(m);
|
||
|
||
return result;
|
||
}
|