rockbox/firmware/target/arm/sandisk/sansa-e200/button-e200.c
Barry Wardell a69b53dc89 Add support for Sansa scrollwheel backlight. Turn light on when scrollwheel is in use, then back off again after a 5 second timeout.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11807 a1c6a512-1295-4272-9138-f99709370657
2006-12-18 19:08:41 +00:00

173 lines
5.1 KiB
C

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2006 by Barry Wardell
*
* All files in this archive are subject to the GNU General Public License.
* See the file COPYING in the source tree root for full license agreement.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
/* Taken from button-h10.c by Barry Wardell and reverse engineering by MrH. */
#include <stdlib.h>
#include "config.h"
#include "cpu.h"
#include "system.h"
#include "button.h"
#include "kernel.h"
#include "backlight.h"
#include "system.h"
static unsigned int old_wheel_value = 0;
static unsigned int wheel_repeat = BUTTON_NONE;
/* Wheel backlight control */
#define WHEEL_BACKLIGHT_TIMEOUT 5*HZ;
static unsigned int wheel_backlight_timer;
void wheel_backlight_on(bool enable)
{
if(enable)
GPIOG_OUTPUT_VAL |=0x80;
else
GPIOG_OUTPUT_VAL &=~ 0x80;
}
void button_init_device(void)
{
/* Enable all buttons */
GPIOF_ENABLE |= 0xff;
GPIOH_ENABLE |= 0xc0;
/* Scrollwheel light - enable control through GPIOG pin 7 and set timeout */
GPIOG_ENABLE = 0x80;
GPIOG_OUTPUT_EN |= 0x80;
wheel_backlight_timer = WHEEL_BACKLIGHT_TIMEOUT;
/* Read initial wheel value (bit 6-7 of GPIOH) */
old_wheel_value = GPIOH_INPUT_VAL & 0xc0;
}
bool button_hold(void)
{
return (GPIOF_INPUT_VAL & 0x80)?true:false;
}
/*
* Get button pressed from hardware
*/
int button_read_device(void)
{
int btn = BUTTON_NONE;
unsigned char state;
static bool hold_button = false;
bool hold_button_old;
unsigned int new_wheel_value;
/* Hold */
hold_button_old = hold_button;
hold_button = button_hold();
#if 0
#ifndef BOOTLOADER
/* light handling */
if (hold_button != hold_button_old)
{
backlight_hold_changed(hold_button);
}
#endif
#endif
/* device buttons */
if (!hold_button)
{
/* Read normal buttons */
state = GPIOF_INPUT_VAL & 0xff;
if ((state & 0x1) == 0) btn |= BUTTON_REC;
if ((state & 0x2) == 0) btn |= BUTTON_DOWN;
if ((state & 0x4) == 0) btn |= BUTTON_RIGHT;
if ((state & 0x8) == 0) btn |= BUTTON_LEFT;
if ((state & 0x10) == 0) btn |= BUTTON_SELECT; /* The centre button */
if ((state & 0x20) == 0) btn |= BUTTON_UP; /* The "play" button */
if ((state & 0x40) != 0) btn |= BUTTON_POWER;
/* Read wheel
* Bits 6 and 7 of GPIOH change as follows:
* Clockwise rotation 01 -> 00 -> 10 -> 11
* Counter-clockwise 11 -> 10 -> 00 -> 01
*
* This is equivalent to wheel_value of:
* Clockwise rotation 0x40 -> 0x00 -> 0x80 -> 0xc0
* Counter-clockwise 0xc0 -> 0x80 -> 0x00 -> 0x40
*/
new_wheel_value = GPIOH_INPUT_VAL & 0xc0;
switch(new_wheel_value){
case 0x00:
if(old_wheel_value==0x80)
btn |= BUTTON_SCROLL_UP;
else if (old_wheel_value==0x40)
btn |= BUTTON_SCROLL_DOWN;
break;
case 0x40:
if(old_wheel_value==0x00)
btn |= BUTTON_SCROLL_UP;
else if (old_wheel_value==0xc0)
btn |= BUTTON_SCROLL_DOWN;
break;
case 0x80:
if(old_wheel_value==0xc0)
btn |= BUTTON_SCROLL_UP;
else if (old_wheel_value==0x00)
btn |= BUTTON_SCROLL_DOWN;
break;
case 0xc0:
if(old_wheel_value==0x40)
btn |= BUTTON_SCROLL_UP;
else if (old_wheel_value==0x80)
btn |= BUTTON_SCROLL_DOWN;
break;
}
if(wheel_repeat == BUTTON_NONE){
if(btn & BUTTON_SCROLL_UP)
wheel_repeat = BUTTON_SCROLL_UP;
if(btn & BUTTON_SCROLL_DOWN)
wheel_repeat = BUTTON_SCROLL_DOWN;
} else if (wheel_repeat == BUTTON_SCROLL_UP) {
btn |= BUTTON_SCROLL_UP;
wheel_repeat = BUTTON_NONE;
} else if (wheel_repeat == BUTTON_SCROLL_DOWN) {
btn |= BUTTON_SCROLL_DOWN;
wheel_repeat = BUTTON_NONE;
}
old_wheel_value = new_wheel_value;
}
if(wheel_backlight_timer>0){
wheel_backlight_timer--;
if(wheel_backlight_timer==0){
wheel_backlight_on(false);
}
}
if( (btn & BUTTON_SCROLL_UP) || (btn & BUTTON_SCROLL_DOWN) ){
if(wheel_backlight_timer==0){
wheel_backlight_on(true);
}
wheel_backlight_timer = WHEEL_BACKLIGHT_TIMEOUT;
}
return btn;
}