rockbox/firmware/target/arm/s3c2440/gigabeat-fx/lcd-target.h
Michael Sevakis 62facd1ff2 Collect some of the memory frame LCD C code.
For this commit: Sansa e200v1, Gigabeat F, Gigabeat S and Mini2440 are
changed over. Quite a number of other targets probably can be as well.

General LCD code is moved out of the target drivers into
drivers/lcd-memframe.c.


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31311 a1c6a512-1295-4272-9138-f99709370657
2011-12-15 23:07:11 +00:00

49 lines
1.6 KiB
C

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2007 by Greg White
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#ifndef LCD_TARGET_H
#define LCD_TARGET_H
#define LCD_FRAMEBUF_ADDR(col, row) ((fb_data *)FRAME + (row)*LCD_WIDTH + (col))
/* Config values for LCDCON1 */
/* ENVID = 0, BPPMODE = 16 bpp, PNRMODE = TFT, MMODE = Each Frame, CLKVAL = 8 */
#define LCD_CLKVAL 8
#define LCD_MMODE 0
#define LCD_PNRMODE 3
#define LCD_BPPMODE 12
#define LCD_ENVID 1
/* Config values for LCDCON2 */
/* VCPW = 1, VFPD = 5, VBPD = 7 */
#define LCD_UPPER_MARGIN 7
#define LCD_LOWER_MARGIN 5
#define LCD_VSYNC_LEN 1
/* Config values for LCDCON3 */
/* HFPD = 9, HBPD = 7 */
#define LCD_LEFT_MARGIN 7
#define LCD_RIGHT_MARGIN 9
/* Config values for LCDCON4 */
/* HSPW = 7 */
#define LCD_HSYNC_LEN 7
#endif /* LCD_TARGET_H */