Rafaël Carré 7831a23376 as3525v2: make sure volume is normal by writing Audioset2 register ... If the bit 6 is set volume is much lower, without writing it explicitely it is undefined. According to linux sources this bit is related to mixer. Initialize Audioset2 with low power 'hph' (probably headphones) quality, as I couldn't make a difference with 'high quality' setting. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25890 a1c6a512-1295-4272-9138-f99709370657		2010-05-07 20:58:43 +00:00
..
audio	as3525v2: make sure volume is normal by writing Audioset2 register	2010-05-07 20:58:43 +00:00
rtc	i.MX31/Gigabeat S: Actually enable DPTC which can set optimal voltage for 528MHz. Requires an SPI and PMIC interface rework because of the low-latency needs for the DPTC to work best with minimal panicing. SPI can work with multitasking and asynchronously from interrupt handlers or normal code.	2010-05-04 10:07:53 +00:00
tuner	Move c/h files implementing/defining standard library stuff into a new libc directory, also standard'ify some parts of the code base (almost entirely #include fixes).	2010-05-06 21:04:40 +00:00
ata.c	Make builds with MAX_PHYS_SECTOR_SIZE defined (ipod video) work with larger sizes if the drive is sane.	2010-04-14 14:40:03 +00:00
ata_flash.c
ata_mmc.c	Simplify some expressions using the ? operator	2010-01-01 22:47:25 +00:00
button.c	FS#10711 by Martin Ritter fixes handling of the 'First Keypress Enables Backlight Only' setting in simulators	2009-12-04 22:43:33 +00:00
dac.c
dac.h	Final removal of tabs in firmware path	2010-01-03 11:31:14 +00:00
eeprom_24cxx.c
fat.c	Add IO priority handling. Currently all IO has equal priority, except the dircache scanning thread which is lower. This fixes the slow boot problem for me, with the added benefit that actual audio playback also starts faster.	2010-04-03 22:02:09 +00:00
fmradio.c
generic_i2c.c
i2c.c
isp1362.c
isp1583.c
lcd-1bit-vert.c	Comment out lcd_drawline() DEBUGF messages which show in various simulators	2010-02-20 06:42:45 +00:00
lcd-2bit-horz.c	Comment out lcd_drawline() DEBUGF messages which show in various simulators	2010-02-20 06:42:45 +00:00
lcd-2bit-vert.c	Comment out lcd_drawline() DEBUGF messages which show in various simulators	2010-02-20 06:42:45 +00:00
lcd-2bit-vi.c	Comment out lcd_drawline() DEBUGF messages which show in various simulators	2010-02-20 06:42:45 +00:00
lcd-16bit-vert.c	Comment out lcd_drawline() DEBUGF messages which show in various simulators	2010-02-20 06:42:45 +00:00
lcd-16bit.c	Comment out lcd_drawline() DEBUGF messages which show in various simulators	2010-02-20 06:42:45 +00:00
lcd-bitmap-common.c	Move c/h files implementing/defining standard library stuff into a new libc directory, also standard'ify some parts of the code base (almost entirely #include fixes).	2010-05-06 21:04:40 +00:00
lcd-charcell.c	Fix the remaining reds.	2010-05-06 22:33:57 +00:00
lcd-charset-player.c	Final removal of tabs in firmware path	2010-01-03 11:31:14 +00:00
lcd-remote-1bit-v.c
lcd-remote-2bit-vi.c
led.c
m5636.c
m66591.c	M66591 Driver: Correct some comments.	2010-03-17 01:43:15 +00:00
mas.c
nand_id.c
pcf50605.c
pcf50606.c
pcf50635.c
qt1106.c
ramdisk.c
sd.c	Fix warnings on logf build	2009-12-25 18:27:26 +00:00
serial.c	Simplify some boolean expressions that compare directly against 'true'	2010-01-02 16:03:30 +00:00
sw_i2c.c
synaptics-mep.c	Packard Bell Vibe 500: touchpad code rework. Improve touch sensivity a bit by setting the MEP parameters in the power_init() function. Implement new function in synaptics-mep driver (touchpad_set_parameter) necessary for it. Move the button lights code to the target backlight file.	2010-02-06 19:15:43 +00:00
touchscreen.c	Remove svn:executable from firmware	2009-10-31 02:26:40 +00:00
tsc200x.c
tsc2100.c	M:Robe 500: Fix FIQ's and make the audio DMA a FIQ, simplify the ADC code and make it more reliable. Fix ADC problems on initial boot.	2009-12-12 18:36:52 +00:00