Jens Arnold 3674af6441 Coldfire: Partially revert buffered writes, and enable them explicitly for the LCD only. Turned out that with buffered writes enabled, reads after writes are not always serialized, which is a bad thing for I/O. Buffered writes to the LCD are safe because that's write-only. Fixes FS #7985. How come I didn't notice this earlier? :> ... git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15173 a1c6a512-1295-4272-9138-f99709370657		2007-10-17 20:45:13 +00:00
..
adc-h100.c	Coldfire: Partially revert buffered writes, and enable them explicitly for the LCD only. Turned out that with buffered writes enabled, reads after writes are not always serialized, which is a bad thing for I/O. Buffered writes to the LCD are safe because that's write-only. Fixes FS #7985. How come I didn't notice this earlier? :>	2007-10-17 20:45:13 +00:00
adc-target.h	H1x0, H300: Get rid of the adc tick, and use the same concept as the iAudio ADC driver.	2007-07-30 19:13:59 +00:00
backlight-h100.c
button-h100.c
lcd-as-h100.S	Coldfire targets: enable buffered writes by default. Speeds up all sorts of I/O that writes to ports: LCD update (except the functions using DMA on H300), ATA writes, .... Some timings had to be adjusted for the new configuration.	2007-10-15 21:16:50 +00:00
lcd-h100.c
power-h100.c	Moved archos power handling into target tree. * Tuner power handling cleaned up a bit.	2007-08-14 22:06:23 +00:00
powermgmt-h100.c	First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines.	2007-08-17 06:45:18 +00:00
spdif-h100.c	Straighten out some audio path APIs and misc. audio stuff. Having recording is not a prerequisite to having input/output source selection which is probably most useful when adding a audio input features like FM to a new port without forcing recording to be implemented first.	2007-06-08 23:42:04 +00:00
sw_i2c-h100.c	Forget all the nonsense with C delay loops. 'volatile' on the variable makes bloated code and a volatile, blank asm block inside may or may not be optimized out. Use asm delay loops instead for Coldfire. Radio i2c driver also needs NACK after reading last tuner byte. Get the volatile off the Ondio loops (not needed here now). Maybe this is straightened out now.	2007-06-27 03:11:49 +00:00
usb-h100.c	FS #7691 - improved USB detection on PP devices. This patch modifies the target-tree function usb_detect() on all targets from bool to int, returning USB_INSERTED or USB_EXTRACTED instead of true or false. This was done to enable the PP usb_detect() to check for USB_POWER (either a connection to a USB wall charger, or the user holding "charge mode" button) and return that as a third value.	2007-09-04 08:03:07 +00:00