rockbox/firmware/target/arm
Thomas Martitz a1bc3401f1 Fix a few possible problems discovered in -O0 / eabi experiments.
- two essential parts of Sansa AMS drivers are optimzed away in newer gcc, so mark them volatile.
- use "r" instead of "i" (which is apparently invalid syntax) for the input list in some inline assembly

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23634 a1c6a512-1295-4272-9138-f99709370657
2009-11-15 17:23:25 +00:00
..
archos/av300
as3525 Fix a few possible problems discovered in -O0 / eabi experiments. 2009-11-15 17:23:25 +00:00
at91sam Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h 2009-06-29 14:30:12 +00:00
imx31 Make current_vp static and importings from Gigabeat F/X/S lcd drivers as they don't need it anymore. 2009-10-26 01:44:39 +00:00
ipod FS#9728: Battery current measuring on the Video iPod 2009-11-03 20:35:04 +00:00
iriver Convert lcd_activation callbacks to use the event system to allow for multiple parallel callbacks (for custom statusbar). 2009-10-20 21:54:59 +00:00
olympus Comment out LOGF_ENABLE defines everywhere, replace evil comments 2009-11-03 16:25:03 +00:00
philips Comment out LOGF_ENABLE defines everywhere, replace evil comments 2009-11-03 16:25:03 +00:00
pnx0101 Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h 2009-06-29 14:30:12 +00:00
s3c2440 Simplify uart_printf() a bit by using vuprintf(), that also makes removing a static buffer possible. 2009-11-03 21:28:02 +00:00
s5l8700 Meizu M3: configure and use SDRAM 2009-11-11 21:31:38 +00:00
samsung Comment out LOGF_ENABLE defines everywhere, replace evil comments 2009-11-03 16:25:03 +00:00
sandisk Convert lcd_activation callbacks to use the event system to allow for multiple parallel callbacks (for custom statusbar). 2009-10-20 21:54:59 +00:00
tatung make ELIO_TPJ1022 bootloader compile again 2009-07-17 22:07:06 +00:00
tcc77x Convert lcd_activation callbacks to use the event system to allow for multiple parallel callbacks (for custom statusbar). 2009-10-20 21:54:59 +00:00
tcc780x Remove svn:executable from firmware 2009-10-31 02:26:40 +00:00
tms320dm320 M:Robe 500 - Enable ASM optimized ATA interface improving disk access speed. 2009-11-09 00:38:10 +00:00
adc-as3514.c
adc-pp5020.c
ascodec-pp.c
ascodec-target.h
ata-as-arm.S M:Robe 500 - Enable ASM optimized ATA interface improving disk access speed. 2009-11-09 00:38:10 +00:00
ata-nand-telechips.c Core changes to allow storage drivers to do cleanup on shutdown, and iPod Nano 2G shutdown code rework (FS#10668) 2009-10-09 20:36:09 +00:00
ata-pp5002.c
ata-pp5020.c 3 new ports: Samsung YH-820, YH-920, and YH-925. Mostly functional. Audio working on 820 & 925 (untested on the 920). No battery readings. No recording. No plugins. Keymap needs work. 2009-05-25 21:10:45 +00:00
ata-sd-pp.c sd_first_drive is only used when HAVE_HOTSWAP is defined, so add appropriate #ifdefs 2009-07-20 19:46:36 +00:00
ata-target.h
audio-pp.c
crt0-pp-bl.S Make RoLo work on PP5002. * Rename CACHE_CTL flag values on PP5002 for consistency. 2009-10-19 21:38:52 +00:00
crt0-pp.S
crt0.S FS#10048 : enable MMU and data cache on Sansa AMS to give a major speed up 2009-06-08 23:05:33 +00:00
ffs-arm.S
i2c-pp.c Philips SA9200: initialize i2c, i2s, and as3514 as the OF does. Fixes clicks/pops heard when reading the adc. 2009-08-01 17:51:00 +00:00
i2c-telechips.c Fix missing i2c mutex initialisation for telechips. 2009-06-21 13:26:32 +00:00
i2s-pp.c Philips SA9200: initialize i2c, i2s, and as3514 as the OF does. Fixes clicks/pops heard when reading the adc. 2009-08-01 17:51:00 +00:00
kernel-pp.c
lcd-as-memframe.S Apply some ARMv6 optimisations to YUV blitting. Speeds up mpegplayer on Gigabeat S by ~2% in undithered and ~7.5% in dithered mode. 2009-07-15 22:14:21 +00:00
lcd-c200_c200v2.c Convert lcd_activation callbacks to use the event system to allow for multiple parallel callbacks (for custom statusbar). 2009-10-20 21:54:59 +00:00
lcd-ssd1815.c
memcpy-arm.S
memmove-arm.S
memset-arm.S
memset16-arm.S
mmu-arm.h ARM922T's icache isn't coherent with its dcache, so we need to ensure that its flushed before changing codecs. Playback takes care of this for us, but only if we define cache coherency functions. Do that. Also, add a comment explaining that MMU functions need to be included so that other people don't spend hours chasing them in the future. 2009-07-05 01:17:25 +00:00
mmu-arm.S Split ARMv6 code from mmu-arm.S 2009-10-18 13:07:14 +00:00
mmu-armv6.S Split ARMv6 code from mmu-arm.S 2009-10-18 13:07:14 +00:00
pcm-pp.c
pcm-telechips.c i7: pcm-telechips fix sampling rate that was about 40000 instead of 44100 2009-09-20 19:53:15 +00:00
powermgmt-ascodec.c
sd-pp-target.h Merge tCardInfo struct (MMC) and tSDCardInfo struct (SD) 2009-07-01 10:07:22 +00:00
system-arm.c Fix dangling #endif 2009-11-14 11:37:16 +00:00
system-arm.h Fix a few possible problems discovered in -O0 / eabi experiments. 2009-11-15 17:23:25 +00:00
system-pp502x.c initial commit of remote support for m:robe 100 courtesy of lowlight; simulator support including small fixes for the m:robe 500 2009-07-26 14:26:14 +00:00
system-pp5002.c Make RoLo work on PP5002. * Rename CACHE_CTL flag values on PP5002 for consistency. 2009-10-19 21:38:52 +00:00
system-target.h
timer-pp.c Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h 2009-06-29 14:30:12 +00:00
usb-drv-arc.c Comment out LOGF_ENABLE defines everywhere, replace evil comments 2009-11-03 16:25:03 +00:00
usb-fw-pp502x.c make ELIO_TPJ1022 bootloader compile again 2009-07-17 22:07:06 +00:00
usb-fw-pp5002.c
usb-s3c6400x.c Plumb an iPod Nano 2G battery leak that started spilling as soon as USB was used at least once until a reboot. 2009-10-24 20:31:40 +00:00
usb-target.h
usb-tcc.c
wmcodec-pp.c
wmcodec-telechips.c