9d4bed7ff0
The cover pictures are loaded from external bitmaps. JPEG and embedded art are not supported. The pictures will only be drawn on the main display. There is no resizing but it is possible to specify the WPS bitmap size in the bitmap names (e.g. cover.100x100.bmp). The bitmaps are stored in the main buffer and read directly from there. Currently, duplicate bitmaps will simply be present several times in the buffer, but this will be improved. To enable for a target, #define HAVE_ALBUMART in its config file. For more information, see the wiki page: http://www.rockbox.org/wiki/AlbumArt. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15572 a1c6a512-1295-4272-9138-f99709370657
177 lines
4.9 KiB
C
177 lines
4.9 KiB
C
#define TARGET_TREE /* this target is using the target tree system */
|
|
/*
|
|
* This config file is for iriver H120 and H140
|
|
*/
|
|
#define IRIVER_H100_SERIES 1
|
|
|
|
/* For Rolo and boot loader */
|
|
#define MODEL_NUMBER 0
|
|
|
|
/* define this if you have a bitmap LCD display */
|
|
#define HAVE_LCD_BITMAP
|
|
|
|
/* define this if you want album art for this target */
|
|
#define HAVE_ALBUMART
|
|
|
|
/* define this if you can flip your LCD */
|
|
#define HAVE_LCD_FLIP
|
|
|
|
/* define this if you can invert the colours on your LCD */
|
|
#define HAVE_LCD_INVERT
|
|
|
|
/* define this if you have access to the quickscreen */
|
|
#define HAVE_QUICKSCREEN
|
|
/* define this if you have access to the pitchscreen */
|
|
#define HAVE_PITCHSCREEN
|
|
|
|
/* define this if you would like tagcache to build on this target */
|
|
#define HAVE_TAGCACHE
|
|
|
|
/* LCD dimensions */
|
|
#define LCD_WIDTH 160
|
|
#define LCD_HEIGHT 128
|
|
#define LCD_DEPTH 2
|
|
|
|
#define LCD_PIXELFORMAT VERTICAL_PACKING
|
|
|
|
/* remote LCD */
|
|
#define LCD_REMOTE_WIDTH 128
|
|
#define LCD_REMOTE_HEIGHT 64
|
|
#define LCD_REMOTE_DEPTH 1
|
|
|
|
#define LCD_REMOTE_PIXELFORMAT VERTICAL_PACKING
|
|
|
|
#define CONFIG_KEYPAD IRIVER_H100_PAD
|
|
|
|
#define CONFIG_REMOTE_KEYPAD H100_REMOTE
|
|
|
|
/* Define this if you do software codec */
|
|
#define CONFIG_CODEC SWCODEC
|
|
|
|
/* Define this if you have an remote lcd */
|
|
#define HAVE_REMOTE_LCD
|
|
|
|
/* Define if we have a hardware defect that causes ticking on the audio line */
|
|
#define HAVE_REMOTE_LCD_TICKING
|
|
|
|
#define CONFIG_LCD LCD_S1D15E06
|
|
|
|
/* Define this for LCD backlight available */
|
|
#define HAVE_BACKLIGHT
|
|
|
|
/* We can fade the backlight by using PWM */
|
|
#define HAVE_BACKLIGHT_PWM_FADING
|
|
|
|
/* Define this if you have a software controlled poweroff */
|
|
#define HAVE_SW_POWEROFF
|
|
|
|
/* The number of bytes reserved for loadable codecs */
|
|
#define CODEC_SIZE 0x80000
|
|
|
|
/* The number of bytes reserved for loadable plugins */
|
|
#define PLUGIN_BUFFER_SIZE 0x80000
|
|
|
|
#define AB_REPEAT_ENABLE 1
|
|
|
|
#define CONFIG_TUNER TEA5767
|
|
#define CONFIG_TUNER_XTAL 32768
|
|
|
|
#define HAVE_UDA1380
|
|
|
|
/* define this if you have recording possibility */
|
|
#define HAVE_RECORDING
|
|
|
|
/* Define bitmask of input sources - recordable bitmask can be defined
|
|
explicitly if different */
|
|
#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | \
|
|
SRC_CAP_FMRADIO | SRC_CAP_SPDIF)
|
|
|
|
/* define hardware samples rate caps mask */
|
|
#define HW_SAMPR_CAPS (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11)
|
|
|
|
/* define the bitmask of recording sample rates */
|
|
#define REC_SAMPR_CAPS (SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11)
|
|
|
|
#define HAVE_AGC
|
|
|
|
#define BATTERY_CAPACITY_DEFAULT 1300 /* default battery capacity */
|
|
#define BATTERY_CAPACITY_MIN 1300 /* min. capacity selectable */
|
|
#define BATTERY_CAPACITY_MAX 3200 /* max. capacity selectable */
|
|
#define BATTERY_CAPACITY_INC 50 /* capacity increment */
|
|
#define BATTERY_TYPES_COUNT 1 /* only one type */
|
|
|
|
/* Hardware controlled charging */
|
|
//#define CONFIG_CHARGING CHARGING_SIMPLE
|
|
#define CONFIG_CHARGING CHARGING_MONITOR /* FIXME: remove that once monitoring is fixed properly */
|
|
|
|
#ifndef SIMULATOR
|
|
|
|
/* Define this if you have a Motorola SCF5249 */
|
|
#define CONFIG_CPU MCF5249
|
|
|
|
/* Define this if you want to use coldfire's i2c interface */
|
|
#define CONFIG_I2C I2C_COLDFIRE
|
|
|
|
/* Define this if you can run rockbox from flash memory */
|
|
#define HAVE_FLASHED_ROCKBOX
|
|
|
|
/* define this if the hardware can be powered off while charging */
|
|
#define HAVE_POWEROFF_WHILE_CHARGING
|
|
|
|
/* The size of the flash ROM */
|
|
#define FLASH_SIZE 0x200000
|
|
|
|
/* Define this to the CPU frequency */
|
|
#define CPU_FREQ 11289600
|
|
|
|
/* Define this if you have ATA power-off control */
|
|
#define HAVE_ATA_POWER_OFF
|
|
|
|
/* Offset ( in the firmware file's header ) to the file CRC */
|
|
#define FIRMWARE_OFFSET_FILE_CRC 0
|
|
|
|
/* Offset ( in the firmware file's header ) to the real data */
|
|
#define FIRMWARE_OFFSET_FILE_DATA 8
|
|
|
|
#define HAVE_ATA_LED_CTRL
|
|
|
|
/* Define this if you have adjustable CPU frequency */
|
|
#define HAVE_ADJUSTABLE_CPU_FREQ
|
|
|
|
#define BOOTFILE_EXT "iriver"
|
|
#define BOOTFILE "rockbox." BOOTFILE_EXT
|
|
#define BOOTDIR "/.rockbox"
|
|
|
|
#define BOOTLOADER_ENTRYPOINT 0x001F0000
|
|
#define FLASH_RAMIMAGE_ENTRY 0x00001000
|
|
#define FLASH_ROMIMAGE_ENTRY 0x00100000
|
|
#define FLASH_MAGIC 0xfbfbfbf2
|
|
|
|
/* Define this if there is an EEPROM chip */
|
|
#define HAVE_EEPROM
|
|
|
|
/* Define this if the EEPROM chip is used */
|
|
#define HAVE_EEPROM_SETTINGS
|
|
|
|
#endif /* !SIMULATOR */
|
|
|
|
/* Define this for S/PDIF output available */
|
|
#define HAVE_SPDIF_OUT
|
|
|
|
/* Define this if you can control the S/PDIF power */
|
|
#define HAVE_SPDIF_POWER
|
|
|
|
/* Define this if you have a serial port */
|
|
/*#define HAVE_SERIAL*/
|
|
|
|
/** Port-specific settings **/
|
|
|
|
/* Main LCD backlight brightness range and defaults */
|
|
#define MIN_CONTRAST_SETTING 14 /* White screen a bit higher than this */
|
|
#define MAX_CONTRAST_SETTING 63 /* Black screen a bit lower than this */
|
|
#define DEFAULT_CONTRAST_SETTING 27
|
|
|
|
/* Remote LCD contrast range and defaults */
|
|
#define MIN_REMOTE_CONTRAST_SETTING 5
|
|
#define MAX_REMOTE_CONTRAST_SETTING 63
|
|
#define DEFAULT_REMOTE_CONTRAST_SETTING 42
|