1b6e8cba62
Because DMA descriptors needs to be committed and discarded from the cache, if they are not cache aligned and/or if their size is not a multiple of cache ligne, nasty side effects could occur with adjacents data. The same applies to DMA buffers which are still potentially broken. Add a macro to ensure that these constraints will not break by error in the future. Change-Id: I1dd69a5a9c29796c156d953eaa57c0d281e79846
408 lines
13 KiB
C
408 lines
13 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Copyright (C) 2011 by amaury Pouly
|
|
*
|
|
* Based on Rockbox iriver bootloader by Linus Nielsen Feltzing
|
|
* and the ipodlinux bootloader by Daniel Palffy and Bernard Leach
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
#include "system.h"
|
|
#include "kernel.h"
|
|
#include "ssp-imx233.h"
|
|
#include "clkctrl-imx233.h"
|
|
#include "pinctrl-imx233.h"
|
|
#include "dma-imx233.h"
|
|
|
|
/* for debug purpose */
|
|
#if 0
|
|
#define ASSERT_SSP(ssp) if(ssp < 1 || ssp > 2) panicf("ssp=%d in %s", ssp, __func__);
|
|
#else
|
|
#define ASSERT_SSP(ssp)
|
|
#endif
|
|
|
|
/* Used for DMA */
|
|
struct ssp_dma_command_t
|
|
{
|
|
struct apb_dma_command_t dma;
|
|
/* PIO words */
|
|
uint32_t ctrl0;
|
|
uint32_t cmd0;
|
|
uint32_t cmd1;
|
|
/* padded to next multiple of cache line size (32 bytes) */
|
|
uint32_t pad[2];
|
|
} __attribute__((packed)) CACHEALIGN_ATTR;
|
|
|
|
__ENSURE_STRUCT_CACHE_FRIENDLY(struct ssp_dma_command_t)
|
|
|
|
static bool ssp_in_use[2];
|
|
static int ssp_nr_in_use = 0;
|
|
static struct mutex ssp_mutex[2];
|
|
static struct semaphore ssp_sema[2];
|
|
static struct ssp_dma_command_t ssp_dma_cmd[2];
|
|
static uint32_t ssp_bus_width[2];
|
|
static unsigned ssp_log_block_size[2];
|
|
static ssp_detect_cb_t ssp_detect_cb[2];
|
|
static bool ssp_detect_invert[2];
|
|
|
|
void INT_SSP(int ssp)
|
|
{
|
|
/* reset dma channel on error */
|
|
if(imx233_dma_is_channel_error_irq(APB_SSP(ssp)))
|
|
imx233_dma_reset_channel(APB_SSP(ssp));
|
|
/* clear irq flags */
|
|
imx233_dma_clear_channel_interrupt(APB_SSP(ssp));
|
|
semaphore_release(&ssp_sema[ssp - 1]);
|
|
}
|
|
|
|
void INT_SSP1_DMA(void)
|
|
{
|
|
INT_SSP(1);
|
|
}
|
|
|
|
void INT_SSP2_DMA(void)
|
|
{
|
|
INT_SSP(2);
|
|
}
|
|
|
|
void INT_SSP1_ERROR(void)
|
|
{
|
|
panicf("ssp1 error");
|
|
}
|
|
|
|
void INT_SSP2_ERROR(void)
|
|
{
|
|
panicf("ssp2 error");
|
|
}
|
|
|
|
void imx233_ssp_init(void)
|
|
{
|
|
/* power down */
|
|
__REG_SET(HW_SSP_CTRL0(1)) = __BLOCK_CLKGATE;
|
|
__REG_SET(HW_SSP_CTRL0(2)) = __BLOCK_CLKGATE;
|
|
|
|
ssp_nr_in_use = 0;
|
|
semaphore_init(&ssp_sema[0], 1, 0);
|
|
semaphore_init(&ssp_sema[1], 1, 0);
|
|
mutex_init(&ssp_mutex[0]);
|
|
mutex_init(&ssp_mutex[1]);
|
|
ssp_bus_width[0] = ssp_bus_width[1] = HW_SSP_CTRL0__BUS_WIDTH__ONE_BIT;
|
|
}
|
|
|
|
void imx233_ssp_start(int ssp)
|
|
{
|
|
ASSERT_SSP(ssp)
|
|
if(ssp_in_use[ssp - 1])
|
|
return;
|
|
ssp_in_use[ssp - 1] = true;
|
|
/* Gate block */
|
|
imx233_reset_block(&HW_SSP_CTRL0(ssp));
|
|
/* Gate dma channel */
|
|
imx233_dma_clkgate_channel(APB_SSP(ssp), true);
|
|
/* If first block to start, start SSP clock */
|
|
if(ssp_nr_in_use == 0)
|
|
{
|
|
/** 2.3.1: the clk_ssp maximum frequency is 102.858 MHz */
|
|
/* fracdiv = 18 => clk_io = pll = 480Mhz
|
|
* intdiv = 5 => clk_ssp = 96Mhz */
|
|
imx233_clkctrl_set_fractional_divisor(CLK_IO, 18);
|
|
imx233_clkctrl_enable_clock(CLK_SSP, false);
|
|
imx233_clkctrl_set_clock_divisor(CLK_SSP, 5);
|
|
imx233_clkctrl_set_bypass_pll(CLK_SSP, false); /* use IO */
|
|
imx233_clkctrl_enable_clock(CLK_SSP, true);
|
|
}
|
|
ssp_nr_in_use++;
|
|
}
|
|
|
|
void imx233_ssp_stop(int ssp)
|
|
{
|
|
ASSERT_SSP(ssp)
|
|
if(!ssp_in_use[ssp - 1])
|
|
return;
|
|
ssp_in_use[ssp - 1] = false;
|
|
/* Gate off */
|
|
__REG_SET(HW_SSP_CTRL0(ssp)) = __BLOCK_CLKGATE;
|
|
/* Gate off dma */
|
|
imx233_dma_clkgate_channel(APB_SSP(ssp), false);
|
|
/* If last block to stop, stop SSP clock */
|
|
ssp_nr_in_use--;
|
|
if(ssp_nr_in_use == 0)
|
|
{
|
|
imx233_clkctrl_enable_clock(CLK_SSP, false);
|
|
imx233_clkctrl_set_fractional_divisor(CLK_IO, 0);
|
|
}
|
|
}
|
|
|
|
void imx233_ssp_softreset(int ssp)
|
|
{
|
|
ASSERT_SSP(ssp)
|
|
imx233_reset_block(&HW_SSP_CTRL0(ssp));
|
|
}
|
|
|
|
void imx233_ssp_set_timings(int ssp, int divide, int rate, int timeout)
|
|
{
|
|
ASSERT_SSP(ssp)
|
|
HW_SSP_TIMING(ssp) = divide << HW_SSP_TIMING__CLOCK_DIVIDE_BP | rate |
|
|
timeout << HW_SSP_TIMING__CLOCK_TIMEOUT_BP;
|
|
}
|
|
|
|
void imx233_ssp_setup_ssp1_sd_mmc_pins(bool enable_pullups, unsigned bus_width,
|
|
unsigned drive_strength, bool use_alt)
|
|
{
|
|
/* SSP_{CMD,SCK} */
|
|
imx233_set_pin_drive_strength(2, 0, drive_strength);
|
|
imx233_set_pin_drive_strength(2, 6, drive_strength);
|
|
imx233_pinctrl_acquire_pin(2, 0, "ssp1 cmd");
|
|
imx233_pinctrl_acquire_pin(2, 6, "ssp1 sck");
|
|
imx233_set_pin_function(2, 0, PINCTRL_FUNCTION_MAIN);
|
|
imx233_set_pin_function(2, 6, PINCTRL_FUNCTION_MAIN);
|
|
imx233_enable_pin_pullup(2, 0, enable_pullups);
|
|
/* SSP_DATA{0-3} */
|
|
for(unsigned i = 0; i < MIN(bus_width, 4); i++)
|
|
{
|
|
imx233_pinctrl_acquire_pin(2, 2 + i, "ssp1 data");
|
|
imx233_set_pin_drive_strength(2, 2 + i, drive_strength);
|
|
imx233_set_pin_function(2, 2 + i, PINCTRL_FUNCTION_MAIN);
|
|
imx233_enable_pin_pullup(2, 2 + i, enable_pullups);
|
|
}
|
|
|
|
/* SSP_DATA{4-7} */
|
|
for(unsigned i = 4; i < bus_width; i++)
|
|
{
|
|
if(use_alt)
|
|
{
|
|
imx233_pinctrl_acquire_pin(0, 22 + i, "ssp1 data");
|
|
imx233_set_pin_drive_strength(0, 22 + i, drive_strength);
|
|
imx233_set_pin_function(0, 22 + i, PINCTRL_FUNCTION_ALT2);
|
|
imx233_enable_pin_pullup(0, 22 + i, enable_pullups);
|
|
}
|
|
else
|
|
{
|
|
imx233_pinctrl_acquire_pin(0, 4 + i, "ssp1 data");
|
|
imx233_set_pin_drive_strength(0, 4 + i, drive_strength);
|
|
imx233_set_pin_function(0, 4 + i, PINCTRL_FUNCTION_ALT2);
|
|
imx233_enable_pin_pullup(0, 4 + i, enable_pullups);
|
|
}
|
|
}
|
|
}
|
|
|
|
void imx233_ssp_setup_ssp2_sd_mmc_pins(bool enable_pullups, unsigned bus_width,
|
|
unsigned drive_strength)
|
|
{
|
|
/* SSP_{CMD,SCK} */
|
|
imx233_pinctrl_acquire_pin(0, 20, "ssp2 cmd");
|
|
imx233_pinctrl_acquire_pin(0, 24, "ssp2 sck");
|
|
imx233_set_pin_drive_strength(0, 20, drive_strength);
|
|
imx233_set_pin_drive_strength(0, 24, drive_strength);
|
|
imx233_set_pin_function(0, 20, PINCTRL_FUNCTION_ALT2);
|
|
imx233_set_pin_function(0, 24, PINCTRL_FUNCTION_ALT2);
|
|
imx233_enable_pin_pullup(0, 20, enable_pullups);
|
|
/* SSP_DATA{0-7}*/
|
|
for(unsigned i = 0; i < bus_width; i++)
|
|
{
|
|
imx233_pinctrl_acquire_pin(0, i, "ssp2 data");
|
|
imx233_set_pin_drive_strength(0, i, drive_strength);
|
|
imx233_set_pin_function(0, i, PINCTRL_FUNCTION_ALT2);
|
|
imx233_enable_pin_pullup(0, i, enable_pullups);
|
|
imx233_enable_gpio_output(0, i, false);
|
|
imx233_set_gpio_output(0, i, false);
|
|
}
|
|
}
|
|
|
|
void imx233_ssp_set_mode(int ssp, unsigned mode)
|
|
{
|
|
ASSERT_SSP(ssp)
|
|
switch(mode)
|
|
{
|
|
case HW_SSP_CTRL1__SSP_MODE__SD_MMC:
|
|
/* clear mode and word length */
|
|
__REG_CLR(HW_SSP_CTRL1(ssp)) =
|
|
HW_SSP_CTRL1__SSP_MODE_BM | HW_SSP_CTRL1__WORD_LENGTH_BM;
|
|
/* set mode, set word length to 8-bit, polarity and enable dma */
|
|
__REG_SET(HW_SSP_CTRL1(ssp)) = mode |
|
|
HW_SSP_CTRL1__WORD_LENGTH__EIGHT_BITS << HW_SSP_CTRL1__WORD_LENGTH_BP |
|
|
HW_SSP_CTRL1__POLARITY | HW_SSP_CTRL1__DMA_ENABLE;
|
|
break;
|
|
default: return;
|
|
}
|
|
}
|
|
|
|
void imx233_ssp_set_bus_width(int ssp, unsigned width)
|
|
{
|
|
ASSERT_SSP(ssp)
|
|
switch(width)
|
|
{
|
|
case 1: ssp_bus_width[ssp - 1] = HW_SSP_CTRL0__BUS_WIDTH__ONE_BIT; break;
|
|
case 4: ssp_bus_width[ssp - 1] = HW_SSP_CTRL0__BUS_WIDTH__FOUR_BIT; break;
|
|
case 8: ssp_bus_width[ssp - 1] = HW_SSP_CTRL0__BUS_WIDTH__EIGHT_BIT; break;
|
|
}
|
|
}
|
|
|
|
void imx233_ssp_set_block_size(int ssp, unsigned log_block_size)
|
|
{
|
|
ASSERT_SSP(ssp)
|
|
ssp_log_block_size[ssp - 1] = log_block_size;
|
|
}
|
|
|
|
enum imx233_ssp_error_t imx233_ssp_sd_mmc_transfer(int ssp, uint8_t cmd,
|
|
uint32_t cmd_arg, enum imx233_ssp_resp_t resp, void *buffer, unsigned block_count,
|
|
bool wait4irq, bool read, uint32_t *resp_ptr)
|
|
{
|
|
ASSERT_SSP(ssp)
|
|
mutex_lock(&ssp_mutex[ssp - 1]);
|
|
/* Enable all interrupts */
|
|
imx233_icoll_enable_interrupt(INT_SRC_SSP_DMA(ssp), true);
|
|
imx233_dma_enable_channel_interrupt(APB_SSP(ssp), true);
|
|
|
|
unsigned xfer_size = block_count * (1 << ssp_log_block_size[ssp - 1]);
|
|
|
|
ssp_dma_cmd[ssp - 1].cmd0 = cmd | HW_SSP_CMD0__APPEND_8CYC |
|
|
ssp_log_block_size[ssp - 1] << HW_SSP_CMD0__BLOCK_SIZE_BP |
|
|
(block_count - 1) << HW_SSP_CMD0__BLOCK_COUNT_BP;
|
|
ssp_dma_cmd[ssp - 1].cmd1 = cmd_arg;
|
|
/* setup all flags and run */
|
|
ssp_dma_cmd[ssp - 1].ctrl0 = xfer_size | HW_SSP_CTRL0__ENABLE |
|
|
(buffer ? 0 : HW_SSP_CTRL0__IGNORE_CRC) |
|
|
(wait4irq ? HW_SSP_CTRL0__WAIT_FOR_IRQ : 0) |
|
|
(resp != SSP_NO_RESP ? HW_SSP_CTRL0__GET_RESP : 0) |
|
|
(resp == SSP_LONG_RESP ? HW_SSP_CTRL0__LONG_RESP : 0) |
|
|
(ssp_bus_width[ssp - 1] << HW_SSP_CTRL0__BUS_WIDTH_BP) |
|
|
(buffer ? HW_SSP_CTRL0__DATA_XFER : 0) |
|
|
(read ? HW_SSP_CTRL0__READ : 0);
|
|
/* setup the dma parameters */
|
|
ssp_dma_cmd[ssp - 1].dma.buffer = buffer;
|
|
ssp_dma_cmd[ssp - 1].dma.next = NULL;
|
|
ssp_dma_cmd[ssp - 1].dma.cmd =
|
|
(buffer == NULL ? HW_APB_CHx_CMD__COMMAND__NO_XFER :
|
|
read ? HW_APB_CHx_CMD__COMMAND__WRITE : HW_APB_CHx_CMD__COMMAND__READ) |
|
|
HW_APB_CHx_CMD__IRQONCMPLT | HW_APB_CHx_CMD__SEMAPHORE |
|
|
HW_APB_CHx_CMD__WAIT4ENDCMD |
|
|
(3 << HW_APB_CHx_CMD__CMDWORDS_BP) |
|
|
(xfer_size << HW_APB_CHx_CMD__XFER_COUNT_BP);
|
|
|
|
__REG_CLR(HW_SSP_CTRL1(ssp)) = HW_SSP_CTRL1__ALL_IRQ;
|
|
imx233_dma_reset_channel(APB_SSP(ssp));
|
|
imx233_dma_start_command(APB_SSP(ssp), &ssp_dma_cmd[ssp - 1].dma);
|
|
|
|
/* the SSP hardware already has a timeout but we never know; 1 sec is a maximum
|
|
* for all operations */
|
|
enum imx233_ssp_error_t ret;
|
|
|
|
if(semaphore_wait(&ssp_sema[ssp - 1], HZ) == OBJ_WAIT_TIMEDOUT)
|
|
{
|
|
imx233_dma_reset_channel(APB_SSP(ssp));
|
|
ret = SSP_TIMEOUT;
|
|
}
|
|
else if((HW_SSP_CTRL1(ssp) & HW_SSP_CTRL1__ALL_IRQ) == 0)
|
|
ret = SSP_SUCCESS;
|
|
else if(HW_SSP_CTRL1(ssp) & (HW_SSP_CTRL1__RESP_TIMEOUT_IRQ |
|
|
HW_SSP_CTRL1__DATA_TIMEOUT_IRQ | HW_SSP_CTRL1__RECV_TIMEOUT_IRQ))
|
|
ret = SSP_TIMEOUT;
|
|
else
|
|
ret = SSP_ERROR;
|
|
|
|
if(resp_ptr != NULL)
|
|
{
|
|
if(resp != SSP_NO_RESP)
|
|
*resp_ptr++ = HW_SSP_SDRESP0(ssp);
|
|
if(resp == SSP_LONG_RESP)
|
|
{
|
|
*resp_ptr++ = HW_SSP_SDRESP1(ssp);
|
|
*resp_ptr++ = HW_SSP_SDRESP2(ssp);
|
|
*resp_ptr++ = HW_SSP_SDRESP3(ssp);
|
|
}
|
|
}
|
|
mutex_unlock(&ssp_mutex[ssp - 1]);
|
|
return ret;
|
|
}
|
|
|
|
void imx233_ssp_sd_mmc_power_up_sequence(int ssp)
|
|
{
|
|
ASSERT_SSP(ssp)
|
|
__REG_CLR(HW_SSP_CMD0(ssp)) = HW_SSP_CMD0__SLOW_CLKING_EN;
|
|
__REG_SET(HW_SSP_CMD0(ssp)) = HW_SSP_CMD0__CONT_CLKING_EN;
|
|
mdelay(1);
|
|
__REG_CLR(HW_SSP_CMD0(ssp)) = HW_SSP_CMD0__CONT_CLKING_EN;
|
|
}
|
|
|
|
static int ssp_detect_oneshot_callback(int ssp)
|
|
{
|
|
ASSERT_SSP(ssp)
|
|
if(ssp_detect_cb[ssp - 1])
|
|
ssp_detect_cb[ssp - 1](ssp);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ssp1_detect_oneshot_callback(struct timeout *tmo)
|
|
{
|
|
(void) tmo;
|
|
return ssp_detect_oneshot_callback(1);
|
|
}
|
|
|
|
static int ssp2_detect_oneshot_callback(struct timeout *tmo)
|
|
{
|
|
(void) tmo;
|
|
return ssp_detect_oneshot_callback(2);
|
|
}
|
|
|
|
static void detect_irq(int bank, int pin)
|
|
{
|
|
static struct timeout ssp1_detect_oneshot;
|
|
static struct timeout ssp2_detect_oneshot;
|
|
if(bank == 2 && pin == 1)
|
|
timeout_register(&ssp1_detect_oneshot, ssp1_detect_oneshot_callback, (3*HZ/10), 0);
|
|
else if(bank == 0 && pin == 19)
|
|
timeout_register(&ssp2_detect_oneshot, ssp2_detect_oneshot_callback, (3*HZ/10), 0);
|
|
}
|
|
|
|
void imx233_ssp_sdmmc_setup_detect(int ssp, bool enable, ssp_detect_cb_t fn,
|
|
bool first_time, bool invert)
|
|
{
|
|
ASSERT_SSP(ssp)
|
|
int bank = ssp == 1 ? 2 : 0;
|
|
int pin = ssp == 1 ? 1 : 19;
|
|
ssp_detect_cb[ssp - 1] = fn;
|
|
ssp_detect_invert[ssp - 1] = invert;
|
|
if(enable)
|
|
{
|
|
imx233_pinctrl_acquire_pin(bank, pin, ssp == 1 ? "ssp1 detect" : "ssp2 detect");
|
|
imx233_set_pin_function(bank, pin, PINCTRL_FUNCTION_GPIO);
|
|
imx233_enable_gpio_output(bank, pin, false);
|
|
}
|
|
if(first_time && imx233_ssp_sdmmc_detect(ssp))
|
|
detect_irq(bank, pin);
|
|
imx233_setup_pin_irq(bank, pin, enable, true, !imx233_ssp_sdmmc_detect_raw(ssp), detect_irq);
|
|
}
|
|
|
|
bool imx233_ssp_sdmmc_is_detect_inverted(int ssp)
|
|
{
|
|
ASSERT_SSP(ssp)
|
|
return ssp_detect_invert[ssp - 1];
|
|
}
|
|
|
|
bool imx233_ssp_sdmmc_detect_raw(int ssp)
|
|
{
|
|
ASSERT_SSP(ssp)
|
|
return !!(HW_SSP_STATUS(ssp) & HW_SSP_STATUS__CARD_DETECT);
|
|
}
|
|
|
|
bool imx233_ssp_sdmmc_detect(int ssp)
|
|
{
|
|
ASSERT_SSP(ssp)
|
|
return imx233_ssp_sdmmc_detect_raw(ssp) != ssp_detect_invert[ssp - 1];
|
|
}
|