4d04132c76
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25970 a1c6a512-1295-4272-9138-f99709370657
230 lines
6.6 KiB
C
230 lines
6.6 KiB
C
/*
|
|
* This config file is for toshiba Gigabeat S
|
|
*/
|
|
|
|
#define TARGET_TREE /* this target is using the target tree system */
|
|
|
|
#define TOSHIBA_GIGABEAT_S 1
|
|
|
|
#define MODEL_NAME "Toshiba Gigabeat S"
|
|
|
|
/* System source clock frequencies (Hz) */
|
|
#define CONFIG_CKIL_FREQ 32768 /* RTC Crystal, Tuner */
|
|
#define CONFIG_CKIH_FREQ 27000000 /* PLL Reference */
|
|
|
|
/* For Rolo and boot loader */
|
|
#define MODEL_NUMBER 21
|
|
|
|
/* define this if you use an ATA controller */
|
|
#define CONFIG_STORAGE STORAGE_ATA
|
|
|
|
/*define this if the ATA controller and method of USB access support LBA48 */
|
|
#define HAVE_LBA48
|
|
|
|
/* define this if you have a bitmap LCD display */
|
|
#define HAVE_LCD_BITMAP
|
|
|
|
/* define this if you have a colour LCD */
|
|
#define HAVE_LCD_COLOR
|
|
|
|
/* define this if you want album art for this target */
|
|
#define HAVE_ALBUMART
|
|
|
|
/* define this to enable bitmap scaling */
|
|
#define HAVE_BMP_SCALING
|
|
|
|
/* define this to enable JPEG decoding */
|
|
#define HAVE_JPEG
|
|
|
|
/* define this if you have access to the quickscreen */
|
|
#define HAVE_QUICKSCREEN
|
|
|
|
/* define this if you have access to the pitchscreen */
|
|
#define HAVE_PITCHSCREEN
|
|
|
|
/* define this if you would like tagcache to build on this target */
|
|
#define HAVE_TAGCACHE
|
|
|
|
/* define this if the target has volume keys which can be used in the lists */
|
|
#define HAVE_VOLUME_IN_LIST
|
|
|
|
/* LCD dimensions */
|
|
#define LCD_WIDTH 240
|
|
#define LCD_HEIGHT 320
|
|
#define LCD_DEPTH 16 /* 65k colours */
|
|
#define LCD_PIXELFORMAT RGB565 /* rgb565 */
|
|
|
|
#define CONFIG_KEYPAD GIGABEAT_S_PAD
|
|
|
|
/* Define this to enable morse code input */
|
|
#define HAVE_MORSE_INPUT
|
|
|
|
/* Define this if you do software codec */
|
|
#define CONFIG_CODEC SWCODEC
|
|
|
|
/* define this if you have a real-time clock */
|
|
#define CONFIG_RTC RTC_MC13783
|
|
|
|
/* Define if the device can wake from an RTC alarm */
|
|
#define HAVE_RTC_ALARM
|
|
|
|
/* Define this for LCD backlight available */
|
|
#define HAVE_BACKLIGHT
|
|
|
|
/* define this if you have a disk storage, i.e. something
|
|
that needs spinups and can cause skips when shaked */
|
|
#define HAVE_DISK_STORAGE
|
|
|
|
/* Define this if you have a software controlled poweroff */
|
|
#define HAVE_SW_POWEROFF
|
|
|
|
/* The number of bytes reserved for loadable codecs */
|
|
#define CODEC_SIZE 0x100000
|
|
|
|
/* The number of bytes reserved for loadable plugins */
|
|
#define PLUGIN_BUFFER_SIZE 0x80000
|
|
|
|
/* Define this if you have a SI4700 fm radio tuner */
|
|
#define CONFIG_TUNER SI4700
|
|
|
|
/* Define this if you have the WM8978 audio codec */
|
|
#define HAVE_WM8978
|
|
|
|
/* Tone controls for WM8978 have not been implemented yet */
|
|
#define HAVE_SW_TONE_CONTROLS
|
|
|
|
/* Define bitmask of input sources - recordable bitmask can be defined
|
|
explicitly if different */
|
|
#define INPUT_SRC_CAPS SRC_CAP_FMRADIO
|
|
|
|
/* define the bitmask of hardware sample rates */
|
|
#define HW_SAMPR_CAPS (SAMPR_CAP_48 | SAMPR_CAP_44 | SAMPR_CAP_32 | \
|
|
SAMPR_CAP_24 | SAMPR_CAP_22 | SAMPR_CAP_16 | \
|
|
SAMPR_CAP_12 | SAMPR_CAP_11 | SAMPR_CAP_8)
|
|
|
|
/* define the bitmask of recording sample rates */
|
|
#define REC_SAMPR_CAPS HW_SAMPR_CAPS /* Same as playback */
|
|
|
|
/* define default recording levels */
|
|
#define DEFAULT_REC_LEFT_GAIN 0
|
|
#define DEFAULT_REC_RIGHT_GAIN 0
|
|
|
|
/* Define this if you have recording capability */
|
|
#define HAVE_RECORDING
|
|
|
|
/* Define this if your LCD can be put to sleep. */
|
|
#define HAVE_LCD_SLEEP
|
|
/* We don't use a setting but a fixed delay after the backlight has
|
|
* turned off */
|
|
#define LCD_SLEEP_TIMEOUT (2*HZ)
|
|
|
|
/* Define this if your LCD can be enabled/disabled */
|
|
#define HAVE_LCD_ENABLE
|
|
|
|
#ifndef BOOTLOADER
|
|
|
|
#define HAVE_BACKLIGHT_BRIGHTNESS
|
|
|
|
/* Main LCD backlight brightness range and defaults */
|
|
#define MIN_BRIGHTNESS_SETTING 1
|
|
#define MAX_BRIGHTNESS_SETTING 24
|
|
#define DEFAULT_BRIGHTNESS_SETTING 12
|
|
|
|
/* Implementation-defined fading type with bool settings */
|
|
#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_TARGET
|
|
|
|
#define HAVE_HEADPHONE_DETECTION
|
|
#endif /* BOOTLOADER */
|
|
|
|
#define CONFIG_CPU IMX31L
|
|
|
|
/* Define this if you want to use imx31l's i2c interface */
|
|
#define CONFIG_I2C I2C_IMX31L
|
|
|
|
/* Define the bitmask of modules used */
|
|
#define SPI_MODULE_MASK (USE_CSPI2_MODULE)
|
|
#define I2C_MODULE_MASK (USE_I2C1_MODULE | USE_I2C2_MODULE)
|
|
#define GPIO_EVENT_MASK (USE_GPIO1_EVENTS)
|
|
|
|
/* Define this if target has an additional number of threads specific to it */
|
|
#define TARGET_EXTRA_THREADS 2
|
|
|
|
/* Type of mobile power - check this out */
|
|
#define BATTERY_CAPACITY_DEFAULT 700 /* default battery capacity */
|
|
#define BATTERY_CAPACITY_MIN 700 /* min. capacity selectable */
|
|
#define BATTERY_CAPACITY_MAX 1200 /* max. capacity selectable */
|
|
#define BATTERY_CAPACITY_INC 25 /* capacity increment */
|
|
#define BATTERY_TYPES_COUNT 1 /* only one type */
|
|
|
|
/* TODO: have a proper status displayed in the bootloader and have it
|
|
* work! */
|
|
/* Charing implemented in a target-specific algorithm */
|
|
#define CONFIG_CHARGING CHARGING_TARGET
|
|
|
|
/* define this if the hardware can be powered off while charging */
|
|
#define HAVE_POWEROFF_WHILE_CHARGING
|
|
|
|
/* The size of the flash ROM */
|
|
#define FLASH_SIZE 0x200000
|
|
|
|
/* Define this to the CPU frequency */
|
|
#define CPU_FREQ 264000000 /* Set by retailOS loader */
|
|
|
|
#define FREQ cpu_frequency
|
|
|
|
/* define this if the unit can be powered or charged via USB */
|
|
#define HAVE_USB_POWER
|
|
#define USBPOWER_BUTTON BUTTON_MENU
|
|
#define USBPOWER_BTN_IGNORE BUTTON_POWER
|
|
|
|
/* define this if the unit has a battery switch or battery can be removed
|
|
* when running */
|
|
#define HAVE_BATTERY_SWITCH
|
|
|
|
/* USB On-the-go */
|
|
#define CONFIG_USBOTG USBOTG_ARC
|
|
|
|
/* enable these for the usb stack */
|
|
#define USE_ROCKBOX_USB
|
|
#define HAVE_USBSTACK
|
|
/* usb stack and driver settings */
|
|
#define USB_PORTSCX_PHY_TYPE PORTSCX_PTS_ULPI
|
|
#define USB_VENDOR_ID 0x0930
|
|
#define USB_PRODUCT_ID 0x0010
|
|
#define HAVE_USB_HID_MOUSE
|
|
|
|
/* Define this if you have ATA power-off control */
|
|
#define HAVE_ATA_POWER_OFF
|
|
|
|
/* Define this to add support for ATA DMA */
|
|
#define HAVE_ATA_DMA
|
|
|
|
#define CONFIG_LCD LCD_GIGABEAT
|
|
|
|
/* Offset ( in the firmware file's header ) to the file CRC */
|
|
#define FIRMWARE_OFFSET_FILE_CRC 0
|
|
|
|
/* Offset ( in the firmware file's header ) to the real data */
|
|
#define FIRMWARE_OFFSET_FILE_DATA 8
|
|
|
|
//#define HAVE_SERIAL
|
|
#define HAVE_VOLUME_IN_LIST
|
|
|
|
/*Remove Comments from UART_INT to enable the UART interrupts,*/
|
|
/*otherwise iterrupts will be disabled. For now we will test */
|
|
/*UART state by polling the registers, and if necessary update this */
|
|
/*method by using the interrupts instead*/
|
|
//#define UART_INT
|
|
|
|
/* Define this if you have adjustable CPU frequency */
|
|
/* #define HAVE_ADJUSTABLE_CPU_FREQ */
|
|
|
|
#define HAVE_PCM_DMA_ADDRESS
|
|
#define HAVE_PCM_REC_DMA_ADDRESS
|
|
|
|
#define BOOTFILE_EXT "gigabeat"
|
|
#define BOOTFILE "rockbox." BOOTFILE_EXT
|
|
#define BOOTDIR "/.rockbox"
|
|
|
|
/* Define this if a programmable hotkey is mapped */
|
|
#define HAVE_HOTKEY
|