Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware/target/coldfire
History
Jens Arnold 8e66491ffe M3: Make remote LCD hotplug work, and make 'backlight on button hold' use the correct hold switch. * Kill a warning. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16711 a1c6a512-1295-4272-9138-f99709370657
2008-03-19 00:34:56 +00:00
..
iaudio M3: Make remote LCD hotplug work, and make 'backlight on button hold' use the correct hold switch. * Kill a warning. 2008-03-19 00:34:56 +00:00
iriver Make the LCD remote work in the Iriver H1x0 and H300 bootloaders as well (untested). * Only try the initial remote LCD init if the remote is plugged, and do it in main builds as well, giving slightly earlier remote LCD output when booting. * Fix delays in the X5/M5 remote LCD init. * Remove an unnecessary check in the X5/M5 remote LCD driver and the M3 LCD driver. 2008-03-13 19:36:58 +00:00
ata-as-coldfire.S Removed executable flag 2007-01-09 23:29:07 +00:00
ata-target.h Removed executable flag 2007-01-09 23:29:07 +00:00
crt0.S More iAudio M3 work. Bootloader compiles, but doesn't work yet. 2008-03-12 20:35:42 +00:00
i2c-coldfire.c Correct the name of a flag. No functional change. 2008-03-18 22:48:26 +00:00
memcpy-coldfire.S Revert accidental tree commit. Sorry for that. 2008-03-08 23:50:55 +00:00
memmove-coldfire.S Removed executable flag 2007-01-09 23:29:07 +00:00
memset-coldfire.S Removed executable flag 2007-01-09 23:29:07 +00:00
memset16-coldfire.S Removed executable flag 2007-01-09 23:29:07 +00:00
pcf50606-coldfire.c Coldfire: Partially revert buffered writes, and enable them explicitly for the LCD only. Turned out that with buffered writes enabled, reads after writes are not always serialized, which is a bad thing for I/O. Buffered writes to the LCD are safe because that's write-only. Fixes FS #7985. How come I didn't notice this earlier? :> 2007-10-17 20:45:13 +00:00
pcm-coldfire.c Sound on M3. yay! 2008-03-15 21:55:14 +00:00
strlen-coldfire.S Simple coldfire assembly strlen() function, 20-25% faster than the c 2007-06-25 20:21:37 +00:00
system-coldfire.c Various coldfire fixes: (1) iAudio Bootloader: Check the status of main & remote power button vs. the respective hold switch, and shut down when on hold. On X5/M5 this check is not strictly necessary for the main unit, but left there to keep things uniform. (2) M3: Stop reading the ADC properly before leaving the bootloader, on RoLo, and on reboot, to make it work reliably after those transitions. (3) Disable all interrupt sources on system init to avoid premature ISR calls after enabling interrupts in general. (4) iAudios: Proper implementation of ide_powered(), avoiding nasty HDD clicks in the bootloader when powering down, e.g. because of Hold. (5) Slight optimisations. 2008-03-17 23:47:38 +00:00
system-target.h Coldfire: Partially revert buffered writes, and enable them explicitly for the LCD only. Turned out that with buffered writes enabled, reads after writes are not always serialized, which is a bad thing for I/O. Buffered writes to the LCD are safe because that's write-only. Fixes FS #7985. How come I didn't notice this earlier? :> 2007-10-17 20:45:13 +00:00
usb-target.h Moved archos USB handling to target tree. Minor simplification for coldfire (only one usb-target.h). 2007-04-11 20:44:32 +00:00