Jens Arnold 9876d91e35 Minor cleanup and a clarification. ... git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16468 a1c6a512-1295-4272-9138-f99709370657		2008-03-01 21:40:33 +00:00
..
archos/av300	Moved archos power handling into target tree. * Tuner power handling cleaned up a bit.	2007-08-14 22:06:23 +00:00
imx31	Bring the IMX31 serial driver in line with the CONTRIBUTING guidelines.	2008-02-19 14:15:59 +00:00
ipod	Revert LCD changes - make sure the backlight remains on as a visible sign that the unit has powered off	2008-02-14 20:48:17 +00:00
iriver	H10-20GB: Commit the first patch in FS#8533 to fix the mpegplayer display problem where only half the data was reaching the display on some players. Two individuals report that it corrects it.	2008-02-01 02:02:38 +00:00
olympus/mrobe-100	m:robe 100 - now that we have working buttons, we can enable backlight on/off.	2008-02-24 04:30:05 +00:00
pnx0101	Hardware controlled backlight brightness for iPod Video and Nano, retaining the software PWM fade in/ fade out. * Backlight handling cleanup, getting rid of one layer of 'lowlevelness'. * Use atomic GPIO bit manipulation for PP502x backlight handling.	2007-11-12 18:49:53 +00:00
s3c2440	Fix the red.	2008-02-13 05:49:48 +00:00
sandisk	acknowledge USB disconnect. This wasn't always done anymore since the usb_wait_for_disconnect() is gone.	2008-02-28 22:51:39 +00:00
tatung/tpj1022	Hardware controlled backlight brightness for iPod Video and Nano, retaining the software PWM fade in/ fade out. * Backlight handling cleanup, getting rid of one layer of 'lowlevelness'. * Use atomic GPIO bit manipulation for PP502x backlight handling.	2007-11-12 18:49:53 +00:00
tcc77x	Hardware controlled backlight brightness for iPod Video and Nano, retaining the software PWM fade in/ fade out. * Backlight handling cleanup, getting rid of one layer of 'lowlevelness'. * Use atomic GPIO bit manipulation for PP502x backlight handling.	2007-11-12 18:49:53 +00:00
tcc780x	a very basic power_off function	2008-02-16 13:01:30 +00:00
tms320dm320	Finally, out goes struct spinlock for anything but mutiprocessor targets where it becomes a reenterable corelock.	2008-01-18 13:12:33 +00:00
adc-pp5020.c	make mrobe100 work again	2008-02-10 16:06:01 +00:00
ata-as-arm.S
ata-pp5002.c
ata-pp5020.c	Restore a line accidentally removed by r15705	2007-11-20 07:52:37 +00:00
ata-target.h
audio-pp.c	Hopefully fix line-in recording on PortalPlayer targets (H10 in particular).	2007-11-11 23:41:54 +00:00
crt0-pp-bl.S	Enable dualcore for the pp5002 processor by adding the needed cache handling and sleep/wakeup sync to the kernel. Refine some handling of fw/bl startup for all.	2007-11-27 01:20:26 +00:00
crt0-pp.S	Enable dualcore for the pp5002 processor by adding the needed cache handling and sleep/wakeup sync to the kernel. Refine some handling of fw/bl startup for all.	2007-11-27 01:20:26 +00:00
i2c-pp.c	Portal player i2c driver: More struct spinlock phaseout.	2007-11-12 07:58:54 +00:00
i2c-telechips.c	Initial Cowon D2 commit:	2008-01-14 22:04:48 +00:00
i2s-pp.c	Finish the conversion to packed i2s for PP502x. Karl Kurbjun-approved for Mini-1G. Simplify the pcm format selection #ifdefs.	2007-10-16 04:19:18 +00:00
lcd-as-memframe.S	More M:Robe work including a fix to lcd-as-memframe for larger screens thanks to Michael Sevakis. Also fixes simulator builds.	2007-10-21 23:12:17 +00:00
memcpy-arm.S
memmove-arm.S
memset-arm.S
memset16-arm.S
mmu-arm.c	Unify the Gigabeat F/X and M:Robe MMU code while enabling it for the M:Robe	2007-10-23 03:29:15 +00:00
mmu-arm.h	Unify the Gigabeat F/X and M:Robe MMU code while enabling it for the M:Robe	2007-10-23 03:29:15 +00:00
pcm-pp.c	audio on the m:robe 100	2008-01-20 12:59:23 +00:00
system-arm.h	Unify PCM interface just above the hardware driver level for all targets including the sims. Perform lockout of audio callback when changing states. Weird new playback or recording trouble? Check before and after this revision first though things seem quite sound.	2007-10-06 22:27:27 +00:00
system-pp502x.c	Driver for the Synaptics touchpad on the m:robe 100 based on the 3-wire interface spec. Needs some tweaking as it's too sensitive with the default hardware settings. For now, the vertical strip is divided into up/select/down buttons. Also, redo the keymap (using the Gigabeat as a starting point), but it still needs a good bit of work.	2008-02-24 04:12:16 +00:00
system-pp5002.c	Enable dualcore for the pp5002 processor by adding the needed cache handling and sleep/wakeup sync to the kernel. Refine some handling of fw/bl startup for all.	2007-11-27 01:20:26 +00:00
system-target.h	Enable dualcore for the pp5002 processor by adding the needed cache handling and sleep/wakeup sync to the kernel. Refine some handling of fw/bl startup for all.	2007-11-27 01:20:26 +00:00
usb-drv-pp502x.c	reset USB controller when entering USB test mode	2008-02-29 18:35:21 +00:00
usb-fw-pp502x.c	Minor cleanup and a clarification.	2008-03-01 21:40:33 +00:00
usb-fw-pp5002.c	FS #7691 - improved USB detection on PP devices. This patch modifies the target-tree function usb_detect() on all targets from bool to int, returning USB_INSERTED or USB_EXTRACTED instead of true or false. This was done to enable the PP usb_detect() to check for USB_POWER (either a connection to a USB wall charger, or the user holding "charge mode" button) and return that as a third value.	2007-09-04 08:03:07 +00:00
usb-target.h
wmcodec-pp.c	Commit FS#8379 by Andree Buschmann. Disables much of the remaining unneeded hardware on PP50xx targets (Ipods, Sansa, H10s, etc) resulting in a large savings in power and consequent increase in battery life. Results vary from target to target and from codec to codec, but we now approach the OF runtime on several PP devices. For now, leave base CPU clock at 30MHz, although further savings is possible with some codecs if clock is reduced. Additionally, fix battery capacity on c200 and use my measurements to improve runtime estimation for Sandisk targets.	2008-02-10 05:39:20 +00:00
wmcodec-telechips.c	Initial Cowon D2 commit:	2008-01-14 22:04:48 +00:00