caaf3c0b97
Add #if0ed USB defines to config-cowond2.h, so experimenting with USB is easy Add dummy set_serial_descriptor() implementation to usb_core.c. This one doesn't generate a unique serial, so it must never be used for non-testing purposes. When usaed, a compiler warning will be generated git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19273 a1c6a512-1295-4272-9138-f99709370657
116 lines
6.9 KiB
C
116 lines
6.9 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Copyright (C) 2008 Vitja Makarov
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
#ifndef USB_TCC7XX_H
|
|
#define USB_TCC7XX_H
|
|
|
|
#define MMR_REG16(base, x) (*(volatile unsigned short *) ((base) + (x)))
|
|
|
|
/* USB PHY registers */
|
|
#define TCC7xx_USB_PHY_CFG MMR_REG16(USB_BASE, 0xc4)
|
|
#define TCC7xx_USB_PHY_CFG_XSEL (1<<13) /* FS/HS Transceiver enable */
|
|
#define TCC7xx_USB_PHY_CFG_DWS (1<<6) /* Host mode */
|
|
#define TCC7xx_USB_PHY_XO (1<<5) /* Enable XO_OUT */
|
|
#define TCC7xx_USB_PHY_CKSEL_12 0
|
|
#define TCC7xx_USB_PHY_CKSEL_24 1
|
|
#define TCC7xx_USB_PHY_CKSEL_48 2
|
|
|
|
/* USB 2.0 device registers */
|
|
#define TCC7xx_USB_INDEX MMR_REG16(USB_BASE, 0x00) /* Endpoint Index register */
|
|
#define TCC7xx_USB_EPIF MMR_REG16(USB_BASE, 0x04) /* Endpoint interrupt flag register */
|
|
#define TCC7xx_USB_EPIE MMR_REG16(USB_BASE, 0x08) /* Endpoint interrupt enable register */
|
|
#define TCC7xx_USB_FUNC MMR_REG16(USB_BASE, 0x0c) /* Function address register */
|
|
#define TCC7xx_USB_EP_DIR MMR_REG16(USB_BASE, 0x14) /* Endpoint direction register */
|
|
#define TCC7xx_USB_TST MMR_REG16(USB_BASE, 0x14) /* Test registerregister */
|
|
#define TCC7xx_USB_SYS_STAT MMR_REG16(USB_BASE, 0x1c) /* System status register */
|
|
#define TCC7xx_USB_SYS_STAT_RESET (1<<0) /* Host forced reced */
|
|
#define TCC7xx_USB_SYS_STAT_SUSPEND (1<<1) /* Host forced suspend */
|
|
#define TCC7xx_USB_SYS_STAT_RESUME (1<<2) /* Host forced resume */
|
|
#define TCC7xx_USB_SYS_STAT_HIGH (1<<4) /* High speed */
|
|
#define TCC7xx_USB_SYS_STAT_SPD_END (1<<6) /* Speed detection end */
|
|
#define TCC7xx_USB_SYS_STAT_VBON (1<<8)
|
|
#define TCC7xx_USB_SYS_STAT_VBOF (1<<9)
|
|
#define TCC7xx_USB_SYS_STAT_EOERR (1<<10) /* overrun error */
|
|
#define TCC7xx_USB_SYS_STAT_DCERR (1<<11) /* Data CRC error */
|
|
#define TCC7xx_USB_SYS_STAT_TCERR (1<<12) /* Token CRC error */
|
|
#define TCC7xx_USB_SYS_STAT_BSERR (1<<13) /* Bit-stuff error */
|
|
#define TCC7xx_USB_SYS_STAT_TMERR (1<<14) /* Timeout error */
|
|
#define TCC7xx_USB_SYS_STAT_BAERR (1<<15) /* Byte align error */
|
|
|
|
#define TCC7xx_USB_SYS_STAT_ERRORS (TCC7xx_USB_SYS_STAT_EOERR | \
|
|
TCC7xx_USB_SYS_STAT_DCERR | \
|
|
TCC7xx_USB_SYS_STAT_TCERR | \
|
|
TCC7xx_USB_SYS_STAT_BSERR | \
|
|
TCC7xx_USB_SYS_STAT_TMERR | \
|
|
TCC7xx_USB_SYS_STAT_BAERR)
|
|
|
|
#define TCC7xx_USB_SYS_CTRL MMR_REG16(USB_BASE, 0x20) /* System control register */
|
|
#define TCC7xx_USB_SYS_CTRL_RESET (1<<0) /* Reset enable */
|
|
#define TCC7xx_USB_SYS_CTRL_SUSPEND (1<<1) /* Suspend enable */
|
|
#define TCC7xx_USB_SYS_CTRL_RESUME (1<<2) /* Resume enable */
|
|
#define TCC7xx_USB_SYS_CTRL_IPS (1<<4) /* Interrupt polarity */
|
|
#define TCC7xx_USB_SYS_CTRL_RFRE (1<<5) /* Reverse read data enable */
|
|
#define TCC7xx_USB_SYS_CTRL_SPDEN (1<<6) /* Speed detection interrupt enable */
|
|
#define TCC7xx_USB_SYS_CTRL_BUS16 (1<<7) /* Select bus width 8/16 */
|
|
#define TCC7xx_USB_SYS_CTRL_EIEN (1<<8) /* Error interrupt enable */
|
|
#define TCC7xx_USB_SYS_CTRL_RWDE (1<<9) /* Reverse write data enable */
|
|
#define TCC7xx_USB_SYS_CTRL_VBONE (1<<10) /* VBus On enable */
|
|
#define TCC7xx_USB_SYS_CTRL_VBOFE (1<<11) /* VBus Off enable */
|
|
#define TCC7xx_USB_SYS_CTRL_DUAL (1<<12) /* Dual interrupt enable*/
|
|
#define TCC7xx_USB_SYS_CTRL_DMAZ (1<<14) /* DMA total count zero int */
|
|
|
|
#define TCC7xx_USB_EP0_STAT MMR_REG16(USB_BASE, 0x24) /* EP0 status register */
|
|
#define TCC7xx_USB_EP0_CTRL MMR_REG16(USB_BASE, 0x28) /* EP0 control register */
|
|
|
|
#define TCC7xx_USB_EP0_BUF MMR_REG16(USB_BASE, 0x60) /* EP0 buffer register */
|
|
#define TCC7xx_USB_EP1_BUF MMR_REG16(USB_BASE, 0x64) /* EP1 buffer register */
|
|
#define TCC7xx_USB_EP2_BUF MMR_REG16(USB_BASE, 0x68) /* EP2 buffer register */
|
|
#define TCC7xx_USB_EP3_BUF MMR_REG16(USB_BASE, 0x6c) /* EP3 buffer register */
|
|
|
|
/* Indexed registers, write endpoint number to TCC7xx_USB_INDEX */
|
|
#define TCC7xx_USB_EP_STAT MMR_REG16(USB_BASE, 0x2c) /* EP status register */
|
|
#define TCC7xx_USP_EP_STAT_RPS (1 << 0) /* Packet received */
|
|
#define TCC7xx_USP_EP_STAT_TPS (1 << 1) /* Packet transmited */
|
|
#define TCC7xx_USP_EP_STAT_LWO (1 << 4) /* Last word odd */
|
|
#define TCC7xx_USB_EP_CTRL MMR_REG16(USB_BASE, 0x30) /* EP control register */
|
|
#define TCC7xx_USB_EP_CTRL_TZLS (1 << 0) /* TX Zero Length Set */
|
|
#define TCC7xx_USB_EP_CTRL_ESS (1 << 1) /* Endpoint Stall Set */
|
|
#define TCC7xx_USB_EP_CTRL_CDP (1 << 2) /* Clear Data PID */
|
|
#define TCC7xx_USB_EP_CTRL_TTE (1 << 5) /* TX Toggle Enable */
|
|
#define TCC7xx_USB_EP_CTRL_FLUSH (1 << 6) /* Flush FIFO */
|
|
#define TCC7xx_USB_EP_CTRL_DUEN (1 << 7) /* Dual FIFO Mode */
|
|
#define TCC7xx_USB_EP_CTRL_IME (1 << 8) /* ISO Mode */
|
|
#define TCC7xx_USB_EP_CTRL_OUTHD (1 << 11) /* OUT Packet Hold */
|
|
#define TCC7xx_USB_EP_CTRL_INHLD (1 << 12) /* IN Packet Hold */
|
|
|
|
#define TCC7xx_USB_EP_BRCR MMR_REG16(USB_BASE, 0x34) /* EP byte read count register */
|
|
#define TCC7xx_USB_EP_BWCR MMR_REG16(USB_BASE, 0x38) /* EP byte write count register */
|
|
#define TCC7xx_USB_EP_MAXP MMR_REG16(USB_BASE, 0x3c) /* EP max packet register */
|
|
|
|
#define TCC7xx_USB_EP_DMA_CTRL MMR_REG16(USB_BASE, 0x40) /* EP DMA control register */
|
|
#define TCC7xx_USB_EP_DMA_TCNTR MMR_REG16(USB_BASE, 0x44) /* EP DMA transfer counter register */
|
|
#define TCC7xx_USB_EP_DMA_FCNTR MMR_REG16(USB_BASE, 0x48) /* EP DMA fifo counter register */
|
|
#define TCC7xx_USB_EP_DMA_TTCNTR1 MMR_REG16(USB_BASE, 0x4c) /* EP DMA total trasfer counter1 register */
|
|
#define TCC7xx_USB_EP_DMA_TTCNTR2 MMR_REG16(USB_BASE, 0x50) /* EP DMA total trasfer counter2 register */
|
|
#define TCC7xx_USB_EP_DMA_ADDR1 MMR_REG16(USB_BASE, 0xa0) /* EP DMA MCU addr1 register */
|
|
#define TCC7xx_USB_EP_DMA_ADDR2 MMR_REG16(USB_BASE, 0xa4) /* EP DMA MCU addr2 register */
|
|
#define TCC7xx_USB_EP_DMA_STAT MMR_REG16(USB_BASE, 0xc0) /* EP DMA Transfer Status register */
|
|
#define TCC7xx_USB_DELAY_CTRL MMR_REG16(USB_BASE, 0x80) /* Delay control register */
|
|
#endif /* USB_TCC7XX_H */
|