rockbox/firmware/export/config-c100.h
Rafaël Carré 9eea8abce5 LCD_DEPTH == 2, vertical packing: specify if lcd framebuffer is in iram into the model specific config file
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22400 a1c6a512-1295-4272-9138-f99709370657
2009-08-18 04:24:01 +00:00

134 lines
3.5 KiB
C

/*
* This config file is for the Sansa C100 series
*/
#define TARGET_TREE /* this target is using the target tree system */
#define MODEL_NAME "Sandisk Sansa c100 series"
/* For Rolo and bootloader */
#define MODEL_NUMBER 30
/* define hardware samples rate caps mask */
#define HW_SAMPR_CAPS (/*SAMPR_CAP_88 | */SAMPR_CAP_44/* | SAMPR_CAP_22 | SAMPR_CAP_11*/)
/* define this if you have a bitmap LCD display */
#define HAVE_LCD_BITMAP
/* define this if you have a colour LCD */
#define HAVE_LCD_COLOR
/* define this if you can flip your LCD */
/*#define HAVE_LCD_FLIP*/
/* define this if you can invert the colours on your LCD */
/*#define HAVE_LCD_INVERT*/
/* define this if you have access to the quickscreen */
#define HAVE_QUICKSCREEN
/* define this if you have access to the pitchscreen */
#define HAVE_PITCHSCREEN
/* define this if you would like tagcache to build on this target */
#define HAVE_TAGCACHE
/* define this if you have a flash memory storage */
#define HAVE_FLASH_STORAGE
/* Only v1 */
#define CONFIG_STORAGE STORAGE_NAND
#define CONFIG_NAND NAND_TCC
/* c100's with direct-to-NAND access are FAT16 */
#define HAVE_FAT16SUPPORT
/* LCD dimensions */
#define LCD_WIDTH 128
#define LCD_HEIGHT 64
#define LCD_DEPTH 16 /* 65536 colours */
#define LCD_PIXELFORMAT RGB565 /*rgb565*/
/*#define LCD_PIXELFORMAT VERTICAL_PACKING*/
/* define this to indicate your device's keypad */
#define CONFIG_KEYPAD SANSA_C100_PAD
/* define this if you have a real-time clock */
#define CONFIG_RTC RTC_TCC77X
/* define this if you have RTC RAM available for settings */
//#define HAVE_RTC_RAM
/* Define this if you have a software controlled poweroff */
#define HAVE_SW_POWEROFF
/* The number of bytes reserved for loadable codecs */
#define CODEC_SIZE 0x50000
/* The number of bytes reserved for loadable plugins */
#define PLUGIN_BUFFER_SIZE 0x50000
#define AB_REPEAT_ENABLE 1
/* Define this if you do software codec */
#define CONFIG_CODEC SWCODEC
/* Define this if you have the TLV320 audio codec */
#define HAVE_TLV320
/*#define CONFIG_TUNER TEA5767*/
/* TLV320 has no tone controls, so we use the software ones */
#define HAVE_SW_TONE_CONTROLS
/* Define this for LCD backlight available */
#define HAVE_BACKLIGHT
#define CONFIG_I2C I2C_TCC77X
#define BATTERY_CAPACITY_DEFAULT 540 /* default battery capacity */
#define BATTERY_CAPACITY_MIN 540 /* min. capacity selectable */
#define BATTERY_CAPACITY_MAX 540 /* max. capacity selectable */
#define BATTERY_CAPACITY_INC 50 /* capacity increment */
#define BATTERY_TYPES_COUNT 1 /* only one type */
/* define this if the unit should not shut down on low battery. */
#define NO_LOW_BATTERY_SHUTDOWN
#ifndef SIMULATOR
/* Define this if you have a TCC770 */
#define CONFIG_CPU TCC770
/* Define this if you have ATA power-off control */
#define HAVE_ATA_POWER_OFF
/* Define this to the CPU frequency */
#define CPU_FREQ 120000000
/* Offset ( in the firmware file's header ) to the file CRC */
#define FIRMWARE_OFFSET_FILE_CRC 0
/* Offset ( in the firmware file's header ) to the real data */
#define FIRMWARE_OFFSET_FILE_DATA 8
/* The start address index for ROM builds */
/* #define ROM_START 0x11010 for behind original Archos */
#define ROM_START 0x7010 /* for behind BootBox */
/* Software controlled LED */
#define CONFIG_LED LED_VIRTUAL
#define CONFIG_LCD LCD_S6B33B2
#define BOOTFILE_EXT "c100"
#define BOOTFILE "rockbox." BOOTFILE_EXT
#define BOOTDIR "/.rockbox"
#ifdef BOOTLOADER
#define TCCBOOT
#endif
#define IRAM_LCDFRAMEBUFFER IBSS_ATTR /* put the lcd frame buffer in IRAM */
#endif /* SIMULATOR */