9551ae92a5
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14481 a1c6a512-1295-4272-9138-f99709370657
171 lines
5 KiB
C
171 lines
5 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Copyright (C) 2002 by Linus Nielsen Feltzing
|
|
*
|
|
* iPod driver based on code from the ipodlinux project - http://ipodlinux.org
|
|
* Adapted for Rockbox in January 2006
|
|
* Original file: podzilla/usb.c
|
|
* Copyright (C) 2005 Adam Johnston
|
|
*
|
|
* All files in this archive are subject to the GNU General Public License.
|
|
* See the file COPYING in the source tree root for full license agreement.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
#include "config.h"
|
|
#include "system.h"
|
|
#include "usb.h"
|
|
#include "button.h"
|
|
#include "ata.h"
|
|
#include "string.h"
|
|
|
|
#ifdef HAVE_USBSTACK
|
|
#include "usbstack.h"
|
|
#else
|
|
#include "arcotg_udc.h"
|
|
#endif
|
|
|
|
void usb_init_device(void)
|
|
{
|
|
int r0;
|
|
outl(inl(0x70000084) | 0x200, 0x70000084);
|
|
|
|
outl(inl(0x7000002C) | 0x3000000, 0x7000002C);
|
|
DEV_EN |= DEV_USB;
|
|
|
|
DEV_RS |= DEV_USB; /* reset usb start */
|
|
DEV_RS &=~DEV_USB;/* reset usb end */
|
|
|
|
DEV_INIT |= INIT_USB;
|
|
while ((inl(0x70000028) & 0x80) == 0);
|
|
|
|
UDC_PORTSC1 |= PORTSCX_PORT_RESET;
|
|
while ((UDC_PORTSC1 & PORTSCX_PORT_RESET) != 0);
|
|
|
|
UDC_OTGSC |= 0x5F000000;
|
|
if( (UDC_OTGSC & 0x100) == 0) {
|
|
UDC_USBMODE &=~ USB_MODE_CTRL_MODE_HOST;
|
|
UDC_USBMODE |= USB_MODE_CTRL_MODE_DEVICE;
|
|
outl(inl(0x70000028) | 0x4000, 0x70000028);
|
|
outl(inl(0x70000028) | 0x2, 0x70000028);
|
|
} else {
|
|
UDC_USBMODE |= USB_MODE_CTRL_MODE_DEVICE;
|
|
outl(inl(0x70000028) &~0x4000, 0x70000028);
|
|
outl(inl(0x70000028) | 0x2, 0x70000028);
|
|
}
|
|
|
|
|
|
UDC_USBCMD |= USB_CMD_CTRL_RESET;
|
|
while((UDC_USBCMD & USB_CMD_CTRL_RESET) != 0);
|
|
|
|
r0 = UDC_PORTSC1;
|
|
|
|
/* Note from IPL source (referring to next 5 lines of code:
|
|
THIS NEEDS TO BE CHANGED ONCE THERE IS KERNEL USB */
|
|
DEV_INIT |= INIT_USB;
|
|
DEV_EN |= DEV_USB;
|
|
while ((inl(0x70000028) & 0x80) == 0);
|
|
outl(inl(0x70000028) | 0x2, 0x70000028);
|
|
|
|
udelay(0x186A0);
|
|
|
|
#ifndef HAVE_USBSTACK
|
|
dr_controller_setup();
|
|
#endif
|
|
|
|
#if defined(IPOD_COLOR) || defined(IPOD_4G) \
|
|
|| defined(IPOD_MINI) || defined(IPOD_MINI2G)
|
|
/* GPIO C bit 1 is firewire detect */
|
|
GPIOC_ENABLE |= 0x02;
|
|
GPIOC_OUTPUT_EN &= ~0x02;
|
|
#endif
|
|
}
|
|
|
|
void usb_enable(bool on)
|
|
{
|
|
#ifndef HAVE_USBSTACK
|
|
/* This device specific code will eventually give way to proper USB
|
|
handling, which should be the same for all PP502x targets. */
|
|
if (on)
|
|
{
|
|
#if defined(IPOD_ARCH) || defined(IRIVER_H10) || defined (IRIVER_H10_5GB)
|
|
/* For the H10 and iPod, we can only do one thing with USB mode - reboot
|
|
into the flash-based disk-mode. This does not return. */
|
|
|
|
#if defined(IRIVER_H10) || defined (IRIVER_H10_5GB)
|
|
if(button_status()==BUTTON_RIGHT)
|
|
#endif
|
|
{
|
|
ata_sleepnow(); /* Immediately spindown the disk. */
|
|
sleep(HZ*2);
|
|
|
|
#ifdef IPOD_ARCH /* The following code is based on ipodlinux */
|
|
#if CONFIG_CPU == PP5020
|
|
memcpy((void *)0x40017f00, "diskmode\0\0hotstuff\0\0\1", 21);
|
|
#elif CONFIG_CPU == PP5022
|
|
memcpy((void *)0x4001ff00, "diskmode\0\0hotstuff\0\0\1", 21);
|
|
#endif
|
|
#endif
|
|
|
|
system_reboot(); /* Reboot */
|
|
}
|
|
#endif
|
|
}
|
|
#endif
|
|
}
|
|
|
|
bool usb_detect(void)
|
|
{
|
|
static bool prev_usbstatus1 = false;
|
|
bool usbstatus1,usbstatus2;
|
|
|
|
#if defined(IPOD_COLOR) || defined(IPOD_4G) \
|
|
|| defined(IPOD_MINI) || defined(IPOD_MINI2G)
|
|
/* GPIO C bit 1 is firewire detect */
|
|
if (!(GPIOC_INPUT_VAL & 0x02))
|
|
return true;
|
|
#endif
|
|
|
|
/* UDC_ID should have the bit format:
|
|
[31:24] = 0x0
|
|
[23:16] = 0x22 (Revision number)
|
|
[15:14] = 0x3 (Reserved)
|
|
[13:8] = 0x3a (NID - 1's compliment of ID)
|
|
[7:6] = 0x0 (Reserved)
|
|
[5:0] = 0x05 (ID) */
|
|
if (UDC_ID != 0x22FA05) {
|
|
return false;
|
|
}
|
|
|
|
usbstatus1 = (UDC_OTGSC & 0x800) ? true : false;
|
|
#ifdef HAVE_USBSTACK
|
|
if ((usbstatus1 == true) && (prev_usbstatus1 == false)) {
|
|
usb_stack_start();
|
|
} else if ((usbstatus1 == false) && (prev_usbstatus1 == true)) {
|
|
usb_stack_stop();
|
|
}
|
|
#else
|
|
if ((usbstatus1 == true) && (prev_usbstatus1 == false)) {
|
|
dr_controller_run();
|
|
} else if ((usbstatus1 == false) && (prev_usbstatus1 == true)) {
|
|
dr_controller_stop();
|
|
}
|
|
#endif
|
|
prev_usbstatus1 = usbstatus1;
|
|
usbstatus2 = (UDC_PORTSC1 & PORTSCX_CURRENT_CONNECT_STATUS) ? true : false;
|
|
|
|
if (usbstatus1 && usbstatus2) {
|
|
return true;
|
|
} else {
|
|
return false;
|
|
}
|
|
}
|