Karl Kurbjun 94bd1f74a7 Make the gigabeat LCD initialization work properly without the original firmware. ... git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16298 a1c6a512-1295-4272-9138-f99709370657		2008-02-13 05:46:04 +00:00
..
adc-meg-fx.c
adc-target.h
ata-meg-fx.c	Unify the Gigabeat F/X and M:Robe MMU code while enabling it for the M:Robe	2007-10-23 03:29:15 +00:00
ata-target.h
backlight-meg-fx.c	- make the booloader compile again	2008-01-25 18:05:21 +00:00
backlight-target.h	Hardware controlled backlight brightness for iPod Video and Nano, retaining the software PWM fade in/ fade out. * Backlight handling cleanup, getting rid of one layer of 'lowlevelness'. * Use atomic GPIO bit manipulation for PP502x backlight handling.	2007-11-12 18:49:53 +00:00
button-meg-fx.c	Use the timeout API as a oneshot for headphone plug debouncing. Set at 1s for now which seems comfortable and was good for meg-fx but target-specific adjustment is easy enough (my 3G hp jack is dead so I can't check that one :( ). Do some minor rearrangements for init safety and consistency.	2008-01-27 21:13:04 +00:00
button-target.h	add separate button defines for the Gigabeat remote control	2007-05-20 11:42:04 +00:00
dma_start.c
i2c-meg-fx.c	Gigabeat: Replace generic i2c driver with one that uses the CPU's builtin controller. Add some clocking registers to 'View I/O ports'.	2007-06-26 02:11:30 +00:00
i2c-meg-fx.h	Gigabeat: Replace generic i2c driver with one that uses the CPU's builtin controller. Add some clocking registers to 'View I/O ports'.	2007-06-26 02:11:30 +00:00
kernel-meg-fx.c	Fix a change that shouldn't have been committed	2007-09-23 15:39:48 +00:00
lcd-meg-fx.c	Make the gigabeat LCD initialization work properly without the original firmware.	2008-02-13 05:46:04 +00:00
lcd-target.h
pcm-meg-fx.c	Unify the Gigabeat F/X and M:Robe MMU code while enabling it for the M:Robe	2007-10-23 03:29:15 +00:00
power-meg-fx.c	Hardware controlled backlight brightness for iPod Video and Nano, retaining the software PWM fade in/ fade out. * Backlight handling cleanup, getting rid of one layer of 'lowlevelness'. * Use atomic GPIO bit manipulation for PP502x backlight handling.	2007-11-12 18:49:53 +00:00
powermgmt-meg-fx.c	First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines.	2007-08-17 06:45:18 +00:00
sc606-meg-fx.c	revert the last changes because they prevent some Gigabeats from shutting down	2007-05-11 16:42:53 +00:00
sc606-meg-fx.h
system-meg-fx.c	meg-fx: correct an oops in the interrupt vector table	2008-01-18 09:17:47 +00:00
system-target.h	Unify the Gigabeat F/X and M:Robe MMU code while enabling it for the M:Robe	2007-10-23 03:29:15 +00:00
timer-meg-fx.c	Gigabeat: oops, forgot to set correct timer prescaler limit.	2007-07-06 22:08:07 +00:00
timer-target.h	Gigabeat: Add timer functionality. Rework tick timer setup to be exactly 100Hz. Metronome should work now but some pcm changes are needed to have faster tocks work correctly (in the works).	2007-07-06 21:36:32 +00:00
usb-meg-fx.c	FS #7691 - improved USB detection on PP devices. This patch modifies the target-tree function usb_detect() on all targets from bool to int, returning USB_INSERTED or USB_EXTRACTED instead of true or false. This was done to enable the PP usb_detect() to check for USB_POWER (either a connection to a USB wall charger, or the user holding "charge mode" button) and return that as a third value.	2007-09-04 08:03:07 +00:00
usb-target.h	FS #7691 - improved USB detection on PP devices. This patch modifies the target-tree function usb_detect() on all targets from bool to int, returning USB_INSERTED or USB_EXTRACTED instead of true or false. This was done to enable the PP usb_detect() to check for USB_POWER (either a connection to a USB wall charger, or the user holding "charge mode" button) and return that as a third value.	2007-09-04 08:03:07 +00:00
wmcodec-meg-fx.c	meg-fx: remove superfluous i2c_init call	2008-01-18 09:35:03 +00:00