rockbox/firmware/target/arm/tms320dm320/creative-zvm/dma-creativezvm.c
Michael Sparmann 9339be1279 Rework ATA driver to get rid of lots of target-specific constants and allow for non-memory-mapped task file registers.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28950 a1c6a512-1295-4272-9138-f99709370657
2011-01-02 22:51:47 +00:00

130 lines
3.9 KiB
C

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2008 by Maurus Cuelenaere
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "config.h"
#include "kernel.h"
#include "thread.h"
#include "system.h"
#include "dma-target.h"
#include "dm320.h"
#include "ata-target.h"
#include <stdbool.h>
#define CS1_START 0x50000000
#define CS2_START 0x60000000
#define SDRAM_START 0x00900000
#define FLASH_START 0x00100000
#define CF_START 0x40000000
#define SSFDC_START 0x48000000
static struct wakeup transfer_completion_signal;
static bool dma_in_progress = false;
void MTC0(void)
{
IO_INTC_IRQ1 = INTR_IRQ1_MTC0;
wakeup_signal(&transfer_completion_signal);
dma_in_progress = false;
}
void dma_start(const void* addr, size_t size)
{
/* Compatibility with Gigabeat S in dma_start.c */
(void) addr;
(void) size;
}
#define ATA_DEST (ATA_IOBASE-CS1_START)
void dma_ata_read(unsigned char* buf, int shortcount)
{
if(dma_in_progress)
wakeup_wait(&transfer_completion_signal, TIMEOUT_BLOCK);
while((unsigned long)buf & 0x1F)
{
unsigned short tmp;
tmp = ATA_IN16(ATA_DATA);
*buf++ = tmp & 0xFF;
*buf++ = tmp >> 8;
shortcount--;
}
if (!shortcount)
return;
IO_SDRAM_SDDMASEL = 0x0820; /* 32-byte burst mode transfer */
IO_EMIF_DMAMTCSEL = 1; /* Select CS1 */
IO_EMIF_AHBADDH = ((unsigned long)buf >> 16) & 0x7FFF; /* Set variable address */
IO_EMIF_AHBADDL = (unsigned long)buf & 0xFFFF;
IO_EMIF_MTCADDH = ( (1 << 15) | (ATA_DEST >> 16) ); /* Set fixed address */
IO_EMIF_MTCADDL = ATA_DEST & 0xFFFF;
IO_EMIF_DMASIZE = shortcount/2; /* 16-bits *2 = 1 word */
IO_EMIF_DMACTL = 3; /* Select MTC->AHB and start transfer */
dma_in_progress = true;
wakeup_wait(&transfer_completion_signal, TIMEOUT_BLOCK);
if(shortcount % 2)
{
unsigned short tmp;
tmp = ATA_IN16(ATA_DATA);
*buf++ = tmp & 0xFF;
*buf++ = tmp >> 8;
}
}
void dma_ata_write(unsigned char* buf, int wordcount)
{
if(dma_in_progress)
wakeup_wait(&transfer_completion_signal, TIMEOUT_BLOCK);
while((unsigned long)buf & 0x1F)
{
unsigned short tmp;
tmp = (unsigned short) *buf++;
tmp |= (unsigned short) *buf++ << 8;
ATA_OUT16(ATA_DATA, tmp);
wordcount--;
}
if (!wordcount)
return;
IO_SDRAM_SDDMASEL = 0x0830; /* 32-byte burst mode transfer */
IO_EMIF_DMAMTCSEL = 1; /* Select CS1 */
IO_EMIF_AHBADDH = ((unsigned long)buf >> 16) & ~(1 << 15); /* Set variable address */
IO_EMIF_AHBADDL = (unsigned long)buf & 0xFFFF;
IO_EMIF_MTCADDH = ( (1 << 15) | (ATA_DEST >> 16) ); /* Set fixed address */
IO_EMIF_MTCADDL = ATA_DEST & 0xFFFF;
IO_EMIF_DMASIZE = (wordcount+1)/2;
IO_EMIF_DMACTL = 1; /* Select AHB->MTC and start transfer */
dma_in_progress = true;
wakeup_wait(&transfer_completion_signal, TIMEOUT_BLOCK);
}
void dma_init(void)
{
IO_INTC_EINT1 |= INTR_EINT1_MTC0; /* enable MTC interrupt */
wakeup_init(&transfer_completion_signal);
dma_in_progress = false;
}