Michael Sevakis 65850011cc Gigabeat S: Do simple direct keypad scanning rather than triggering a separate scan interrupt and it all does the same thing but with 1 tick less latency. ... git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28926 a1c6a512-1295-4272-9138-f99709370657		2010-12-29 18:20:31 +00:00
..
gigabeat-s	Gigabeat S: Do simple direct keypad scanning rather than triggering a separate scan interrupt and it all does the same thing but with 1 tick less latency.	2010-12-29 18:20:31 +00:00
app.lds	*/app.lds: remove STUBOFFSET	2010-09-20 17:09:55 +00:00
ata-imx31.c	Gigabeat S: Use statically initialized channel descriptors. Also, there's no need for them to be in non-cached memory since they're only used on the AP side.	2010-06-24 08:40:05 +00:00
ata-target.h
avic-imx31.c	Configure Gigabeat S with EABI compiler by default. Implement the INIT section that this enables (due to selective need for long calls). Remove pcm_postinit from INIT section since it's asynchronous. Disable strict aliasing on SPC codec for now just to shut it up.	2010-06-11 14:39:35 +00:00
avic-imx31.h	i.MX31: Make some style changes to some driver code so that hardware vs. variable access is more obvious to the eye. Change a few data types and qualifiers. No functional differences.	2010-05-07 02:29:18 +00:00
boot.lds	Gigabeat S: Reclaim about 800K of memory that was laying unused. Get rid of DEVBSS_ATTR for this target and implement as NOCACHEBSS_ATTR. Plugin and codec buffers move so all that is now incompatible (do full update). No version increase for plugins/codecs because the loader will reject them.	2010-05-08 07:45:34 +00:00
ccm-imx31.c	Remove atomic register bit manipulation functions from i.MX and s3c target code and introduce generic functions for ARM (bitmod32, bitset32, and bitclr32). Multiprocessor support is possible but just not implemented at the moment, only interrupt lockout.	2010-06-30 02:02:46 +00:00
ccm-imx31.h
crt0.S	Configure Gigabeat S with EABI compiler by default. Implement the INIT section that this enables (due to selective need for long calls). Remove pcm_postinit from INIT section since it's asynchronous. Disable strict aliasing on SPC codec for now just to shut it up.	2010-06-11 14:39:35 +00:00
debug-imx31.c	move dbg_ports() from apps/menu_debug.c to target tree. FS#11712 by me.	2010-11-06 14:24:25 +00:00
debug-target.h	move dbg_ports() from apps/menu_debug.c to target tree. FS#11712 by me.	2010-11-06 14:24:25 +00:00
dvfs_dptc-imx31.c	Remove atomic register bit manipulation functions from i.MX and s3c target code and introduce generic functions for ARM (bitmod32, bitset32, and bitclr32). Multiprocessor support is possible but just not implemented at the moment, only interrupt lockout.	2010-06-30 02:02:46 +00:00
dvfs_dptc-imx31.h	i.MX31/Gigabeat S: This should fix stability problems. One problem was to start using the DVFS controller properly so that interrupts will be masked at the lowest and highest frequency indexes. Millions of useless interrupts were occurring at 132MHz because its index was 2, not 3, which masks it automatically when it can't go slower. Stopping the flood was enough to actually see the difference in general. IRQ must be disabled when fiddling with the CCM registers and only enabled when waiting for voltage ramp as having them enables also causes spurious DVFS ints. Implement interruptible ISR pro/epilogue more safely (always using IRQ stack even in SVC mode handling). Fix an improper inequality in DVFS code (which set regs for down when going up and v.v.). Misc. support changes. Have internal tables take less RAM.	2010-05-06 03:23:51 +00:00
gpio-imx31.c	Configure Gigabeat S with EABI compiler by default. Implement the INIT section that this enables (due to selective need for long calls). Remove pcm_postinit from INIT section since it's asynchronous. Disable strict aliasing on SPC codec for now just to shut it up.	2010-06-11 14:39:35 +00:00
gpio-imx31.h	i.MX31/Gigabeat S minor cleaning: Make HW access more obvious in places I forgot to do earlier. Reduce the number of structs that need to be filled-out for some drivers just to simplify a little. Change some types.	2010-05-07 10:53:19 +00:00
i2c-imx31.c	i.MX31: Make some style changes to some driver code so that hardware vs. variable access is more obvious to the eye. Change a few data types and qualifiers. No functional differences.	2010-05-07 02:29:18 +00:00
i2c-imx31.h	i.MX31: Make some style changes to some driver code so that hardware vs. variable access is more obvious to the eye. Change a few data types and qualifiers. No functional differences.	2010-05-07 02:29:18 +00:00
iomuxc-imx31.c	Remove atomic register bit manipulation functions from i.MX and s3c target code and introduce generic functions for ARM (bitmod32, bitset32, and bitclr32). Multiprocessor support is possible but just not implemented at the moment, only interrupt lockout.	2010-06-30 02:02:46 +00:00
iomuxc-imx31.h
mc13783-imx31.c	Remove atomic register bit manipulation functions from i.MX and s3c target code and introduce generic functions for ARM (bitmod32, bitset32, and bitclr32). Multiprocessor support is possible but just not implemented at the moment, only interrupt lockout.	2010-06-30 02:02:46 +00:00
mmu-imx31.c
mmu-imx31.h
rolo_restart_firmware.S	Introduce NORETURN_ATTR wrapper for __attribute__((noreturn)), using this and a bit further cleanup in main gets rid of a warning when compiling for android.	2010-08-12 13:38:25 +00:00
sdma-imx31.c	i.MX31: Make DMA ISR call loop a bit more efficient.	2010-06-30 07:08:10 +00:00
sdma-imx31.h
sdma_script_code.h	i.MX31: Only include the SDMA code that will be used on the target. Simplify the script selection.	2010-06-30 05:02:58 +00:00
sdma_struct.h
serial-imx31.h
spi-imx31.c	Configure Gigabeat S with EABI compiler by default. Implement the INIT section that this enables (due to selective need for long calls). Remove pcm_postinit from INIT section since it's asynchronous. Disable strict aliasing on SPC codec for now just to shut it up.	2010-06-11 14:39:35 +00:00
spi-imx31.h	Gigabeat S: Implement LCD contrast, invert and flip modes. Enhance LCD power management. Include init data but it's not needed yet (identical to Gigabeat F).	2010-05-18 23:50:00 +00:00