rockbox/firmware/export/eros_qn_codec.h
Dana Conrad 66519000f4 ErosQNative: Enable Line Out capabilities on new revision players
The newer players have some changed hardware, but most importantly
the line out now appears to be routed through the stereo switch
instead of being hardwired directly off the DAC.

Disable muting the headphone amp, enable switching the stereo switch,
and rename some of the GPIOs to be more generic since the DAC,
headphone amp, and stereo switch all appear to have changed.

Change-Id: I220fe5e37bcbcd959b544183e1fcf70673a83c13
2023-01-22 15:11:35 -05:00

44 lines
1.6 KiB
C

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
*
* Copyright (c) 2021 Andrew Ryabinin, Dana Conrad
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#ifndef _EROS_QN_CODEC_H
#define _EROS_QN_CODEC_H
/*
* Note: Maximum volume is set one step below unity in order to
* avoid overflowing pcm samples due to our DC Offset.
*
* The DAC's output is hot enough this should not be an issue.
*/
#define PCM5102A_VOLUME_MIN -740
#define PCM5102A_VOLUME_MAX -20
/* a small DC offset prevents play/pause clicking due to the DAC auto-muting */
#define PCM_DC_OFFSET_VALUE -1
AUDIOHW_SETTING(VOLUME, "dB", 0, 2, PCM5102A_VOLUME_MIN/10, PCM5102A_VOLUME_MAX/10, 0)
/* this just calls audiohw_set_volume() with the last (locally) known volume,
* used for switching to/from fixed line out volume. */
void dac_set_outputs(void);
#endif