Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware/export/config/sansafuzev2.h
Aidan MacDonald bcbb5a8b00 multiboot: Allow searching in volume 0 for redirect file 
Searching in volume 0 is necessary for multiboot targets with only
one drive, like the M3K/Q1/ErosQ. Without this the search code will
never look at the redirect file on these targets.

The search bound is configured with a setting MULTIBOOT_MIN_VOLUME,
which defaults to 0, but is defined to 1 for Sansa players so they
keep their old behavior.

Change-Id: I6dc5cf98db4258731de2c68c3ab1182b4a4a655b
2022-03-27 09:50:33 -04:00

237 lines
6.7 KiB
C
Raw Blame History

/*
* This config file is for the Sandisk Sansa Fuze v2
*/
/* For Rolo and boot loader */
#define MODEL_NUMBER 68
#define MODEL_NAME "Sandisk Sansa Fuze v2"
/* Define if boot data from bootloader has been enabled for the target */
#define HAVE_BOOTDATA
/* define boot redirect file name allows booting from external drives */
#define BOOT_REDIR "rockbox_main.fuze2"
#define MULTIBOOT_MIN_VOLUME 1
#define HW_SAMPR_CAPS SAMPR_CAP_ALL_96
/* define this if you have recording possibility */
#define HAVE_RECORDING
#define REC_SAMPR_CAPS (SAMPR_CAP_48 | SAMPR_CAP_44 | SAMPR_CAP_32 | \
SAMPR_CAP_24 | SAMPR_CAP_22 | SAMPR_CAP_16 | \
SAMPR_CAP_12 | SAMPR_CAP_11 | SAMPR_CAP_8)
/* because the samplerates don't match at each point, we must be able to
* tell PCM which set of rates to use. not needed if recording rates are
* a simple subset of playback rates and are equal values. */
#define CONFIG_SAMPR_TYPES
/* Default recording levels */
#define DEFAULT_REC_MIC_GAIN 23
#define DEFAULT_REC_LEFT_GAIN 23
#define DEFAULT_REC_RIGHT_GAIN 23
/* Define bitmask of input sources - recordable bitmask can be defined
explicitly if different */
#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FMRADIO)
/* define this if you have a colour LCD */
#define HAVE_LCD_COLOR
#ifndef BOOTLOADER/* define this if you want album art for this target */
#define HAVE_ALBUMART
/* define this to enable bitmap scaling */
#define HAVE_BMP_SCALING
/* define this to enable JPEG decoding */
#define HAVE_JPEG
/* define this if you have access to the quickscreen */
#define HAVE_QUICKSCREEN
/* define this if you would like tagcache to build on this target */
#define HAVE_TAGCACHE
/* define this if you have LCD enable function */
#define HAVE_LCD_ENABLE
/* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
should be defined as well.
#define HAVE_LCD_SLEEP
#define HAVE_LCD_SLEEP_SETTING
*/
/* define this if you can flip your LCD */
#define HAVE_LCD_FLIP
/* define this if you can invert the colours on your LCD */
#define HAVE_LCD_INVERT
#ifndef BOOTLOADER
/* define this if you have a real-time clock */
#define CONFIG_RTC RTC_AS3514
/* Define if the device can wake from an RTC alarm */
#define HAVE_RTC_ALARM
#endif
/* There is no hardware tone control */
#define HAVE_SW_TONE_CONTROLS
/* define this if the unit uses a scrollwheel for navigation */
#define HAVE_SCROLLWHEEL
/* define to activate advanced wheel acceleration code */
#define HAVE_WHEEL_ACCELERATION
/* define from which rotation speed [degree/sec] on the acceleration starts */
#define WHEEL_ACCEL_START 720
/* define type of acceleration (1 = ^2, 2 = ^3, 3 = ^4) */
#define WHEEL_ACCELERATION 1
#endif /* !BOOTLOADER */
/* put the lcd frame buffer in IRAM */
#define IRAM_LCDFRAMEBUFFER //IBSS_ATTR
#define CONFIG_KEYPAD SANSA_FUZE_PAD
/* Define this to have CPU boosted while scrolling in the UI */
#define HAVE_GUI_BOOST
/* Define this to enable morse code input */
#define HAVE_MORSE_INPUT
/* LCD dimensions */
#define LCD_WIDTH 220
#define LCD_HEIGHT 176
/* sqrt(220^2 + 176^2) / 2.2 = 128.1 */
#define LCD_DPI 128
#define LCD_DEPTH 16 /* 65536 colours */
#define LCD_PIXELFORMAT RGB565SWAPPED /* rgb565 swapped */
/* AS3514 or newer */
#define HAVE_AS3514
#define HAVE_AS3543
/* Define this if you have a software controlled poweroff */
#define HAVE_SW_POWEROFF
/* Some Sansa Fuzes seem to be FAT16 formatted */
#define HAVE_FAT16SUPPORT
/* The number of bytes reserved for loadable codecs */
#define CODEC_SIZE (0x100000-0x8000)
/* The number of bytes reserved for loadable plugins */
#define PLUGIN_BUFFER_SIZE 0x80000
#define AB_REPEAT_ENABLE
/* FM Tuner - suspected to be the SI4702 */
#define CONFIG_TUNER (SI4700|RDA5802)
/* #define HAVE_TUNER_PWR_CTRL */
/* Define this for LCD backlight available */
#define HAVE_BACKLIGHT
#define HAVE_BACKLIGHT_BRIGHTNESS
/* Main LCD backlight brightness range and defaults */
#define MIN_BRIGHTNESS_SETTING 1
#define MAX_BRIGHTNESS_SETTING 12
#define DEFAULT_BRIGHTNESS_SETTING 6
/* define this if you have a light associated with the buttons */
#define HAVE_BUTTON_LIGHT
/* Which backlight fading type? */
#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_SETTING
/* define this if you have a flash memory storage */
#define HAVE_FLASH_STORAGE
/* define this if the flash memory uses the SecureDigital Memory Card protocol */
#define CONFIG_STORAGE STORAGE_SD
#define BATTERY_CAPACITY_DEFAULT 550 /* default battery capacity */
#define BATTERY_CAPACITY_MIN 550 /* min. capacity selectable */
#define BATTERY_CAPACITY_MAX 550 /* max. capacity selectable */
#define BATTERY_CAPACITY_INC 0 /* capacity increment */
#define BATTERY_TYPES_COUNT 1 /* only one type */
#define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE
/* Charging implemented in a target-specific algorithm */
#define CONFIG_CHARGING CHARGING_TARGET
/* define this if the unit can be powered or charged via USB */
#define HAVE_USB_POWER
/* Define this if you have an AMS AS3525v2 */
#define CONFIG_CPU AS3525v2
/* Define this if you want to use the AS2525 i2c interface */
#define CONFIG_I2C I2C_AS3525
/* define this if the hardware can be powered off while charging */
#define HAVE_POWEROFF_WHILE_CHARGING
/* define current usage levels (based on battery bench) */
#define CURRENT_NORMAL 11
#define CURRENT_BACKLIGHT 30
#define CURRENT_RECORD CURRENT_NORMAL
/* maximum charging current */
#define CURRENT_MAX_CHG 200
/* Define this to the CPU frequency */
#define CPU_FREQ 192000000
/* Type of LCD */
#define CONFIG_LCD LCD_FUZE
/* Offset ( in the firmware file's header ) to the file CRC and data. These are
only used when loading the old format rockbox.e200 file */
#define FIRMWARE_OFFSET_FILE_CRC 0x0
#define FIRMWARE_OFFSET_FILE_DATA 0x8
#define HAVE_MULTIDRIVE
#define NUM_DRIVES 2
#ifndef BOOTLOADER
#define HAVE_HOTSWAP
#endif
/* USB On-the-go */
#define CONFIG_USBOTG USBOTG_DESIGNWARE
/* logf() over USB serial (http://www.rockbox.org/wiki/PortalPlayerUsb) */
//#define USB_ENABLE_SERIAL
/* enable these for the experimental usb stack */
#define HAVE_USBSTACK
#define USB_VENDOR_ID 0x0781
#define USB_PRODUCT_ID 0x74c3 /* MSC = 0x74c3, MTP = 0x74c2 */
#define HAVE_BOOTLOADER_USB_MODE
/* Define this if you have adjustable CPU frequency */
#define HAVE_ADJUSTABLE_CPU_FREQ
/*define this to enable CPU voltage scaling on AMS devices*/
#define HAVE_ADJUSTABLE_CPU_VOLTAGE
#define BOOTFILE_EXT "sansa"
#define BOOTFILE "rockbox." BOOTFILE_EXT
#define BOOTDIR "/.rockbox"
#define ICODE_ATTR_TREMOR_NOT_MDCT
#define INCLUDE_TIMEOUT_API
/* Define this if a programmable hotkey is mapped */
#define HAVE_HOTKEY
Reference in a new issue View git blame Copy permalink