rockbox/firmware/export/config/samsungyh920.h
Solomon Peachy 8cb555460f [3/4] Completely remove HWCODEC support
'swcodec' is now always set (and recording_swcodec for recording-capable
units) in feature.txt so the manual and language strings don't need to
all be fixed up.

Change-Id: Ib2c9d5d157af8d33653e2d4b4a12881b9aa6ddb0
2020-07-24 21:20:13 +00:00

213 lines
5.8 KiB
C

/*
* This config file is for the Samsung YH-920
*/
/* For Rolo and boot loader */
#define MODEL_NUMBER 58
#define MODEL_NAME "Samsung YH-920"
/* define this if you have recording possibility */
#define HAVE_RECORDING
/* Define bitmask of input sources - recordable bitmask can be defined
explicitly if different */
#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_FMRADIO)
/* define the bitmask of hardware sample rates */
#define HW_SAMPR_CAPS (SAMPR_CAP_48 | SAMPR_CAP_44 | SAMPR_CAP_32 | \
SAMPR_CAP_24 | SAMPR_CAP_22 | SAMPR_CAP_16 | \
SAMPR_CAP_11 | SAMPR_CAP_8)
/* define the bitmask of recording sample rates */
#define REC_SAMPR_CAPS (SAMPR_CAP_48 | SAMPR_CAP_44 | SAMPR_CAP_32 | \
SAMPR_CAP_24 | SAMPR_CAP_22 | SAMPR_CAP_16 | \
SAMPR_CAP_11 | SAMPR_CAP_8)
/* Type of LCD */
#define CONFIG_LCD LCD_S1D15E06
/* LCD dimensions */
#define LCD_WIDTH 160
#define LCD_HEIGHT 128
/* sqrt(160^2 + 128^2) / 1.8 = 113.8 */
#define LCD_DPI 114
#define LCD_DEPTH 2
#define LCD_PIXELFORMAT VERTICAL_PACKING
/* Display colours, for screenshots and sim (0xRRGGBB) */
#define LCD_DARKCOLOR 0x000000
#define LCD_BRIGHTCOLOR 0x5a915a
#define LCD_BL_DARKCOLOR 0x000000
#define LCD_BL_BRIGHTCOLOR 0xadd8e6
/* todo */
/* #ifndef BOOTLOADER */
#if 0
/* Define this if your LCD can be enabled/disabled */
#define HAVE_LCD_ENABLE
/* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
* should be defined as well.
* We can currently put the lcd to sleep but it won't wake up properly */
#define HAVE_LCD_SLEEP
#define HAVE_LCD_SLEEP_SETTING
#endif
/* Define this for LCD backlight available */
#define HAVE_BACKLIGHT
/* Define this if your LCD can set contrast */
#define HAVE_LCD_CONTRAST
#define MIN_CONTRAST_SETTING 50
#define MAX_CONTRAST_SETTING 70
#define DEFAULT_CONTRAST_SETTING 61 /* Match boot contrast */
/* define this if you can flip your LCD */
#define HAVE_LCD_FLIP
/* define this if you can invert the colours on your LCD */
#define HAVE_LCD_INVERT
/* put the lcd frame buffer in IRAM */
/* #define IRAM_LCDFRAMEBUFFER IDATA_ATTR */
/* define this if you have a bitmap LCD display */
#define HAVE_LCD_BITMAP
/* define this if you want album art for this target */
#define HAVE_ALBUMART
/* define this to enable bitmap scaling */
#define HAVE_BMP_SCALING
/* define this to enable JPEG decoding */
#define HAVE_JPEG
/* define this if you have access to the quickscreen */
#define HAVE_QUICKSCREEN
/* define this if you would like tagcache to build on this target */
#define HAVE_TAGCACHE
#define CONFIG_KEYPAD SAMSUNG_YH92X_PAD
/* Define this to enable morse code input */
#define HAVE_MORSE_INPUT
/* define this if you have a real-time clock */
#ifndef BOOTLOADER
#define CONFIG_RTC RTC_E8564
/* TODO ??? */
//#define HAVE_RTC_ALARM
#endif
/* define this if you have a disk storage, i.e. something
that needs spinups and can cause skips when shaked */
#define HAVE_DISK_STORAGE
/* define this if you use an ATA controller */
#define CONFIG_STORAGE STORAGE_ATA
/*define this if the ATA controller and method of USB access support LBA48 */
#define HAVE_LBA48
/* We're able to shut off power to the HDD */
#define HAVE_ATA_POWER_OFF
/* Software controlled LED */
#define CONFIG_LED LED_REAL
/* Define this if you have a software controlled poweroff */
#define HAVE_SW_POWEROFF
/* The number of bytes reserved for loadable codecs */
#define CODEC_SIZE 0x100000
/* The number of bytes reserved for loadable plugins */
#define PLUGIN_BUFFER_SIZE 0x80000
/* Define this if you have the AK4537 audio codec */
#define HAVE_AK4537
/* AK4537 has no tone controls, so we use the software ones */
#define HAVE_SW_TONE_CONTROLS
/* FM Tuner */
#define CONFIG_TUNER TEA5767
#define CONFIG_TUNER_XTAL 32768
/* Define this if the tuner uses 3-wire bus instead of classic i2c */
#define CONFIG_TUNER_3WIRE
#define AB_REPEAT_ENABLE
#define BATTERY_CAPACITY_DEFAULT 900 /* default battery capacity */
#define BATTERY_CAPACITY_MIN 900 /* min. capacity selectable */
#define BATTERY_CAPACITY_MAX 1600 /* max. capacity selectable */
#define BATTERY_CAPACITY_INC 50 /* capacity increment */
#define BATTERY_TYPES_COUNT 1 /* only one type */
#define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE
/* Hardware controlled charging */
#define CONFIG_CHARGING CHARGING_SIMPLE
/* define this if the unit can be powered or charged via USB */
#define HAVE_USB_POWER
/* Define this if you have a PortalPlayer PP5020 */
#define CONFIG_CPU PP5020
/* Define this if you want to use the PP5020 i2c interface */
#define CONFIG_I2C I2C_PP5020
/* define this if the hardware can be powered off while charging */
#define HAVE_POWEROFF_WHILE_CHARGING
/* The start address index for ROM builds */
#define ROM_START 0x00000000
/* The size of the flash ROM */
#define FLASH_SIZE 0x100000
/* Define this to the CPU frequency */
#define CPU_FREQ 75000000
/* USB On-the-go */
#define CONFIG_USBOTG USBOTG_ARC
/* enable these for the experimental usb stack */
#define HAVE_USBSTACK
#define USB_VENDOR_ID 0x04e8
#define USB_PRODUCT_ID 0x5022
#define HAVE_USB_HID_MOUSE
/* Define this if you have adjustable CPU frequency */
#define HAVE_ADJUSTABLE_CPU_FREQ
#define MI4_FORMAT
#define BOOTFILE_EXT "mi4"
#define BOOTFILE "rockbox." BOOTFILE_EXT
#define BOOTDIR "/.rockbox"
/* Offset ( in the firmware file's header ) to the file CRC */
#define FIRMWARE_OFFSET_FILE_CRC 0x00
/* Offset ( in the firmware file's header ) to the real data */
#define FIRMWARE_OFFSET_FILE_DATA 0x00
#define ICODE_ATTR_TREMOR_NOT_MDCT
/* DMA is used only for reading on PP502x because although reads are ~8x faster
* writes appear to be ~25% slower.
*/
#ifndef BOOTLOADER
#define HAVE_ATA_DMA
#endif
/* Define this if a programmable hotkey is mapped */
#define HAVE_HOTKEY