rockbox/firmware/export/config/hifimanhm60x.h
Solomon Peachy 8cb555460f [3/4] Completely remove HWCODEC support
'swcodec' is now always set (and recording_swcodec for recording-capable
units) in feature.txt so the manual and language strings don't need to
all be fixed up.

Change-Id: Ib2c9d5d157af8d33653e2d4b4a12881b9aa6ddb0
2020-07-24 21:20:13 +00:00

186 lines
4.9 KiB
C

/*
* This config file is for HiFiMAN HM-60x reference design
*/
/* For Rolo and boot loader */
#define MODEL_NUMBER 79
#define MODEL_NAME "HiFiMAN HM-60x"
/* Define bitmask of input sources - recordable bitmask can be defined
explicitly if different */
/* #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FM) */
/* define the bitmask of hardware sample rates */
#define HW_SAMPR_CAPS (SAMPR_CAP_96 | SAMPR_CAP_48 | SAMPR_CAP_44 | \
SAMPR_CAP_32 | SAMPR_CAP_24 | SAMPR_CAP_22 | \
SAMPR_CAP_16 | SAMPR_CAP_12 | SAMPR_CAP_11 | SAMPR_CAP_8)
#define HAVE_DUMMY_CODEC
#define CODEC_SLAVE
/* define this if you have a bitmap LCD display */
#define HAVE_LCD_BITMAP
/* define this if you can flip your LCD */
/* #define HAVE_LCD_FLIP */
/* define this if you have a colour LCD */
#define HAVE_LCD_COLOR
/* define this if you want album art for this target */
#define HAVE_ALBUMART
/* define this to enable bitmap scaling */
#define HAVE_BMP_SCALING
/* define this to enable JPEG decoding */
#define HAVE_JPEG
/* define this if you can invert the colours on your LCD */
/* #define HAVE_LCD_INVERT */
/* define this if you have access to the quickscreen */
#define HAVE_QUICKSCREEN
/* define this if you would like tagcache to build on this target */
#define HAVE_TAGCACHE
/* define this if you have a flash memory storage */
#define HAVE_FLASH_STORAGE
#define CONFIG_STORAGE (STORAGE_SD | STORAGE_NAND)
#define CONFIG_NAND NAND_RK27XX
#define HAVE_SW_TONE_CONTROLS
#define HAVE_SW_VOLUME_CONTROL
/* commented for now */
/* #define HAVE_HOTSWAP */
#define NUM_DRIVES 2
#define SECTOR_SIZE 512
/* for small(ish) SD cards */
#define HAVE_FAT16SUPPORT
/* LCD dimensions */
#define LCD_WIDTH 220
#define LCD_HEIGHT 176
/* sqrt(220^2 + 176^2) / 2.0 = 140.9 */
#define LCD_DPI 141
#define LCD_DEPTH 16 /* pseudo 262.144 colors */
#define LCD_PIXELFORMAT RGB565 /* rgb565 */
/* Define this if the LCD can shut down */
/* #define HAVE_LCD_SHUTDOWN */
/* Define this if your LCD can be enabled/disabled */
#define HAVE_LCD_ENABLE
/* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
should be defined as well. */
#ifndef BOOTLOADER
/* TODO: #define HAVE_LCD_SLEEP */
/* TODO: #define HAVE_LCD_SLEEP_SETTING */
#endif
#define CONFIG_KEYPAD HM60X_PAD
/* Define this to enable morse code input */
#define HAVE_MORSE_INPUT
/* define this if you have a real-time clock */
/* #define CONFIG_RTC RTC_NANO2G */
/* Define if the device can wake from an RTC alarm */
/* #define HAVE_RTC_ALARM */
#define CONFIG_LCD LCD_HX8340B
/* Define the type of audio codec */
/*#define HAVE_RK27XX_CODEC */
/* #define HAVE_PCM_DMA_ADDRESS */
/* Define this for LCD backlight available */
#define HAVE_BACKLIGHT
#define HAVE_BACKLIGHT_BRIGHTNESS
#define MIN_BRIGHTNESS_SETTING 0
#define MAX_BRIGHTNESS_SETTING 31
#define DEFAULT_BRIGHTNESS_SETTING 20
#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_HW_REG
/* Define this if you have a software controlled poweroff */
#define HAVE_SW_POWEROFF
/* The number of bytes reserved for loadable codecs */
#define CODEC_SIZE 0x100000
/* The number of bytes reserved for loadable plugins */
#define PLUGIN_BUFFER_SIZE 0x80000
/* TODO: Figure out real values */
#define BATTERY_CAPACITY_DEFAULT 600 /* default battery capacity */
#define BATTERY_CAPACITY_MIN 300 /* min. capacity selectable */
#define BATTERY_CAPACITY_MAX 600 /* max. capacity selectable */
#define BATTERY_CAPACITY_INC 10 /* capacity increment */
#define BATTERY_TYPES_COUNT 1 /* only one type */
#define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE
/* Hardware controlled charging with monitoring */
#define CONFIG_CHARGING CHARGING_MONITOR
/* define current usage levels */
/* TODO: #define CURRENT_NORMAL
* TODO: #define CURRENT_BACKLIGHT 23
*/
/* define this if the unit can be powered or charged via USB */
#define HAVE_USB_POWER
/* USB On-the-go */
#define CONFIG_USBOTG USBOTG_RK27XX
/* enable these for the experimental usb stack */
#define HAVE_USBSTACK
#define USB_VENDOR_ID 0x071b
#define USB_PRODUCT_ID 0x3202
#define HAVE_BOOTLOADER_USB_MODE
/* Define this if your LCD can set contrast */
/* #define HAVE_LCD_CONTRAST */
/* The exact type of CPU */
#define CONFIG_CPU RK27XX
/* I2C interface */
#define CONFIG_I2C I2C_RK27XX
/* Define this to the CPU frequency */
#define CPU_FREQ 200000000
/* define this if the hardware can be powered off while charging */
/* #define HAVE_POWEROFF_WHILE_CHARGING */
/* Offset ( in the firmware file's header ) to the file CRC */
#define FIRMWARE_OFFSET_FILE_CRC 0
/* Offset ( in the firmware file's header ) to the real data */
#define FIRMWARE_OFFSET_FILE_DATA 8
/* Define this if you have adjustable CPU frequency */
#define HAVE_ADJUSTABLE_CPU_FREQ
/* Virtual LED (icon) */
#define CONFIG_LED LED_VIRTUAL
#define RKW_FORMAT
#define BOOTFILE_EXT "rkw"
#define BOOTFILE "rockbox." BOOTFILE_EXT
#define BOOTDIR "/.rockbox"