rockbox/firmware/export/config/gogearsa9200.h
Solomon Peachy 8cb555460f [3/4] Completely remove HWCODEC support
'swcodec' is now always set (and recording_swcodec for recording-capable
units) in feature.txt so the manual and language strings don't need to
all be fixed up.

Change-Id: Ib2c9d5d157af8d33653e2d4b4a12881b9aa6ddb0
2020-07-24 21:20:13 +00:00

197 lines
5.4 KiB
C

/*
* This config file is for the Philips GoGear SA9200
*/
/* For Rolo and boot loader */
#define MODEL_NUMBER 34
#define MODEL_NAME "Philips GoGear SA9200"
#define HW_SAMPR_CAPS (SAMPR_CAP_44)
/* define this if you have a bitmap LCD display */
#define HAVE_LCD_BITMAP
/* define this if you have a colour LCD */
#define HAVE_LCD_COLOR
/* define this if you want album art for this target */
#define HAVE_ALBUMART
/* define this to enable bitmap scaling */
#define HAVE_BMP_SCALING
/* define this to enable JPEG decoding */
#define HAVE_JPEG
/* define this if you have a light associated with the buttons */
#define HAVE_BUTTON_LIGHT
/* define this if you have access to the quickscreen */
#define HAVE_QUICKSCREEN
/* define this if you would like tagcache to build on this target */
#define HAVE_TAGCACHE
/* LCD dimensions */
#define LCD_WIDTH 128
#define LCD_HEIGHT 160
/* sqrt(128^2 + 160^2) / 1.7 = 120.5 */
#define LCD_DPI 121
#define LCD_DEPTH 16 /* 65536 colours */
#define LCD_PIXELFORMAT RGB565 /* rgb565 */
#ifndef BOOTLOADER
/* define this if you have LCD enable function */
#define HAVE_LCD_ENABLE
/* Define this if your LCD can be put to sleep.
HAVE_LCD_ENABLE should be defined as well. */
#define HAVE_LCD_SLEEP
#define HAVE_LCD_SLEEP_SETTING
#endif
/* define this if you can flip your LCD */
#define HAVE_LCD_FLIP
/* define this if you can invert the colours on your LCD */
#define HAVE_LCD_INVERT
/* #define IRAM_LCDFRAMEBUFFER IDATA_ATTR *//* put the lcd frame buffer in IRAM */
#define CONFIG_KEYPAD PHILIPS_SA9200_PAD
#define HAVE_HARDWARE_CLICK
/* Define this to enable morse code input */
#define HAVE_MORSE_INPUT
/* define this if the target has volume keys which can be used in the lists */
#define HAVE_VOLUME_IN_LIST
/* There is no hardware tone control */
#define HAVE_SW_TONE_CONTROLS
/* The PP5024 has a built-in AustriaMicrosystems AS3514 */
#define HAVE_AS3514
/* define this if you have a real-time clock */
#ifndef BOOTLOADER
#define CONFIG_RTC RTC_AS3514
#endif
/* Define this if you have a software controlled poweroff */
#define HAVE_SW_POWEROFF
/* Some Sansa E200s seem to be FAT16 formatted */
#define HAVE_FAT16SUPPORT
/* The number of bytes reserved for loadable codecs */
#define CODEC_SIZE 0x100000
/* The number of bytes reserved for loadable plugins */
#define PLUGIN_BUFFER_SIZE 0x80000
#define AB_REPEAT_ENABLE
/* Define this if you can detect headphones */
#define HAVE_HEADPHONE_DETECTION
/* Define this for LCD backlight available */
#define HAVE_BACKLIGHT
#define HAVE_BACKLIGHT_BRIGHTNESS
/* Main LCD backlight brightness range and defaults */
#define MIN_BRIGHTNESS_SETTING 1
#define MAX_BRIGHTNESS_SETTING 12
#define DEFAULT_BRIGHTNESS_SETTING 6
/* Which backlight fading type? */
#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_SETTING
/* define this if you have a light associated with the buttons */
#define HAVE_BUTTON_LIGHT
/* Can't control the brightness on all the buttons */
/* #define HAVE_BUTTONLIGHT_BRIGHTNESS */
/* define this if you have a flash memory storage */
#define HAVE_FLASH_STORAGE
/* define this if the flash memory uses the SecureDigital Memory Card protocol */
#define CONFIG_STORAGE STORAGE_SD
#define BATTERY_CAPACITY_DEFAULT 750 /* default battery capacity */
#define BATTERY_CAPACITY_MIN 750 /* min. capacity selectable */
#define BATTERY_CAPACITY_MAX 750 /* max. capacity selectable */
#define BATTERY_CAPACITY_INC 0 /* capacity increment */
#define BATTERY_TYPES_COUNT 1 /* only one type */
#define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE
/* Charging implemented in a target-specific algorithm */
#define CONFIG_CHARGING CHARGING_TARGET
#define HAVE_POWEROFF_WHILE_CHARGING
/* define current usage levels (copied from the e200v1 )*/
#define CURRENT_NORMAL 30 /* Toni's measurements in Nov 2008 */
#define CURRENT_BACKLIGHT 40 /* Screen is about 20, blue LEDs are another 20, so 40 if both */
#define CURRENT_RECORD 30 /* flash player, so this is just unboosted current*/
/* define this if the unit can be powered or charged via USB */
#define HAVE_USB_POWER
/* Define this if you have a PortalPlayer PP5024 */
#define CONFIG_CPU PP5024
/* Define this if you want to use the PP5024 i2c interface */
#define CONFIG_I2C I2C_PP5024
/* The start address index for ROM builds */
#define ROM_START 0x00000000
/* Define this to the CPU frequency */
#define CPU_FREQ 75000000
/* Type of LCD */
#define CONFIG_LCD LCD_SA9200
/* Define this if your LCD can set contrast */
#define HAVE_LCD_CONTRAST
#define MIN_CONTRAST_SETTING 0
#define MAX_CONTRAST_SETTING 31
#define DEFAULT_CONTRAST_SETTING 22 /* Match boot contrast */
/* USB On-the-go */
#define CONFIG_USBOTG USBOTG_ARC
/* enable these for the experimental usb stack */
#define HAVE_USBSTACK
#define USB_VENDOR_ID 0x0471
#define USB_PRODUCT_ID 0x014f
#define HAVE_USB_HID_MOUSE
#ifdef BOOTLOADER
/* enable bootloader USB mode - ONLY define when also BOOTLOADER */
#define HAVE_BOOTLOADER_USB_MODE
#endif
/* Define this if you have adjustable CPU frequency */
#define HAVE_ADJUSTABLE_CPU_FREQ
#define MI4_FORMAT
#define BOOTFILE_EXT "mi4"
#define BOOTFILE "rockbox." BOOTFILE_EXT
#define BOOTDIR "/.rockbox"
/* These values are unused, but need to be defined */
#define FIRMWARE_OFFSET_FILE_CRC 0x0
#define FIRMWARE_OFFSET_FILE_DATA 0x8
#define ICODE_ATTR_TREMOR_NOT_MDCT
#define INCLUDE_TIMEOUT_API
/* Define this if a programmable hotkey is mapped */
#define HAVE_HOTKEY