df8f64d3a4
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21347 a1c6a512-1295-4272-9138-f99709370657
109 lines
2.9 KiB
C
109 lines
2.9 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Copyright (C) 2006 by Daniel Ankers
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
|
|
#include <stdbool.h>
|
|
#include "system.h"
|
|
#include "cpu.h"
|
|
#include "ascodec.h"
|
|
#include "as3514.h"
|
|
#include "power.h"
|
|
#include "synaptics-mep.h"
|
|
#include "logf.h"
|
|
|
|
void power_init(void)
|
|
{
|
|
#ifndef BOOTLOADER
|
|
/* Power on and initialize the touchpad here because we need it for
|
|
both buttons and button lights */
|
|
DEV_INIT2 &= ~0x800;
|
|
|
|
char byte = ascodec_read(AS3514_CVDD_DCDC3);
|
|
byte = (byte & ~0x18) | 0x08;
|
|
ascodec_write(AS3514_CVDD_DCDC3, byte);
|
|
|
|
/* LEDs for REW, FFWD, MENU */
|
|
GPIOD_ENABLE |= (0x40 | 0x20 | 0x04);
|
|
GPIOD_OUTPUT_VAL |= (0x40 | 0x20 | 0x04);
|
|
GPIOD_OUTPUT_EN |= (0x40 | 0x20 | 0x04);
|
|
udelay(20000);
|
|
|
|
GPIOL_ENABLE |= 0x10;
|
|
GPIOL_OUTPUT_VAL &= ~0x10;
|
|
GPIOL_OUTPUT_EN |= 0x10;
|
|
udelay(100000);
|
|
|
|
/* enable DATA, ACK, CLK lines */
|
|
GPIOD_ENABLE |= (0x10 | 0x08 | 0x02);
|
|
|
|
GPIOD_OUTPUT_EN |= 0x08; /* ACK */
|
|
GPIOD_OUTPUT_VAL |= 0x08; /* high */
|
|
|
|
GPIOD_OUTPUT_EN &= ~0x02; /* CLK */
|
|
|
|
GPIOD_OUTPUT_EN |= 0x10; /* DATA */
|
|
GPIOD_OUTPUT_VAL |= 0x10; /* high */
|
|
|
|
if (!touchpad_init())
|
|
{
|
|
logf("touchpad not ready");
|
|
}
|
|
#endif
|
|
}
|
|
|
|
void power_off(void)
|
|
{
|
|
char byte;
|
|
|
|
/* Send shutdown command to PMU */
|
|
byte = ascodec_read(AS3514_SYSTEM);
|
|
byte &= ~0x1;
|
|
ascodec_write(AS3514_SYSTEM, byte);
|
|
|
|
/* Stop interrupts on both cores */
|
|
disable_interrupt(IRQ_FIQ_STATUS);
|
|
COP_INT_DIS = -1;
|
|
CPU_INT_DIS = -1;
|
|
|
|
/* Halt everything and wait for device to power off */
|
|
while (1)
|
|
{
|
|
COP_CTL = 0x40000000;
|
|
CPU_CTL = 0x40000000;
|
|
}
|
|
}
|
|
|
|
unsigned int power_input_status(void)
|
|
{
|
|
unsigned int status = POWER_INPUT_NONE;
|
|
|
|
/* GPIOF indicates that the connector is present,
|
|
GPIOB indicates that there's power there too.
|
|
Same status bits for both USB and the charger. */
|
|
if (!(GPIOF_INPUT_VAL & 0x80) && (GPIOB_INPUT_VAL & 0x40))
|
|
status = POWER_INPUT_MAIN_CHARGER;
|
|
|
|
return status;
|
|
}
|
|
|
|
void ide_power_enable(bool on)
|
|
{
|
|
(void)on;
|
|
}
|