7ad2cad173
buffer chunks. * Samples and position indication is closely associated with audio data instead of compensating by a latency constant. Alleviates problems with using the elapsed as a track indicator where it could be off by several steps. * Timing is accurate throughout track even if resampling for pitch shift, whereas before it updated during transition latency at the normal 1:1 rate. * Simpler PCM buffer with a constant chunk size, no linked lists. In converting crossfade, a minor change was made to not change the WPS until the fade-in of the incoming track, whereas before it would change upon the start of the fade-out of the outgoing track possibly having the WPS change with far too much lead time. Codec changes are to set elapsed times *before* writing next PCM frame because time and position data last set are saved in the next committed PCM chunk. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30366 a1c6a512-1295-4272-9138-f99709370657
225 lines
7.1 KiB
C
225 lines
7.1 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Copyright (C) 2009 Mohamed Tarek
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
|
|
#include "codeclib.h"
|
|
#include <codecs/librm/rm.h>
|
|
#include <inttypes.h> /* Needed by a52.h */
|
|
#include <codecs/liba52/config-a52.h>
|
|
#include <codecs/liba52/a52.h>
|
|
|
|
CODEC_HEADER
|
|
|
|
#define BUFFER_SIZE 4096
|
|
|
|
#define A52_SAMPLESPERFRAME (6*256)
|
|
|
|
static a52_state_t *state;
|
|
static unsigned long samplesdone;
|
|
static unsigned long frequency;
|
|
static RMContext rmctx;
|
|
static RMPacket pkt;
|
|
|
|
static void init_rm(RMContext *rmctx)
|
|
{
|
|
memcpy(rmctx, (void*)(( (intptr_t)ci->id3->id3v2buf + 3 ) &~ 3), sizeof(RMContext));
|
|
}
|
|
|
|
/* used outside liba52 */
|
|
static uint8_t buf[3840] IBSS_ATTR;
|
|
|
|
/* The following two functions, a52_decode_data and output_audio are taken from apps/codecs/a52.c */
|
|
static inline void output_audio(sample_t *samples)
|
|
{
|
|
ci->yield();
|
|
ci->pcmbuf_insert(&samples[0], &samples[256], 256);
|
|
}
|
|
|
|
static void a52_decode_data(uint8_t *start, uint8_t *end)
|
|
{
|
|
static uint8_t *bufptr = buf;
|
|
static uint8_t *bufpos = buf + 7;
|
|
/*
|
|
* sample_rate and flags are static because this routine could
|
|
* exit between the a52_syncinfo() and the ao_setup(), and we want
|
|
* to have the same values when we get back !
|
|
*/
|
|
static int sample_rate;
|
|
static int flags;
|
|
int bit_rate;
|
|
int len;
|
|
|
|
while (1) {
|
|
len = end - start;
|
|
if (!len)
|
|
break;
|
|
if (len > bufpos - bufptr)
|
|
len = bufpos - bufptr;
|
|
memcpy(bufptr, start, len);
|
|
bufptr += len;
|
|
start += len;
|
|
if (bufptr == bufpos) {
|
|
if (bufpos == buf + 7) {
|
|
int length;
|
|
|
|
length = a52_syncinfo(buf, &flags, &sample_rate, &bit_rate);
|
|
if (!length) {
|
|
//DEBUGF("skip\n");
|
|
for (bufptr = buf; bufptr < buf + 6; bufptr++)
|
|
bufptr[0] = bufptr[1];
|
|
continue;
|
|
}
|
|
bufpos = buf + length;
|
|
} else {
|
|
/* Unity gain is 1 << 26, and we want to end up on 28 bits
|
|
of precision instead of the default 30.
|
|
*/
|
|
level_t level = 1 << 24;
|
|
sample_t bias = 0;
|
|
int i;
|
|
|
|
/* This is the configuration for the downmixing: */
|
|
flags = A52_STEREO | A52_ADJUST_LEVEL;
|
|
|
|
if (a52_frame(state, buf, &flags, &level, bias))
|
|
goto error;
|
|
a52_dynrng(state, NULL, NULL);
|
|
frequency = sample_rate;
|
|
|
|
/* An A52 frame consists of 6 blocks of 256 samples
|
|
So we decode and output them one block at a time */
|
|
for (i = 0; i < 6; i++) {
|
|
if (a52_block(state))
|
|
goto error;
|
|
output_audio(a52_samples(state));
|
|
samplesdone += 256;
|
|
}
|
|
ci->set_elapsed(samplesdone/(frequency/1000));
|
|
bufptr = buf;
|
|
bufpos = buf + 7;
|
|
continue;
|
|
error:
|
|
//logf("Error decoding A52 stream\n");
|
|
bufptr = buf;
|
|
bufpos = buf + 7;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/* this is the codec entry point */
|
|
enum codec_status codec_main(enum codec_entry_call_reason reason)
|
|
{
|
|
if (reason == CODEC_LOAD) {
|
|
/* Generic codec initialisation */
|
|
ci->configure(DSP_SET_STEREO_MODE, STEREO_NONINTERLEAVED);
|
|
ci->configure(DSP_SET_SAMPLE_DEPTH, 28);
|
|
}
|
|
else if (reason == CODEC_UNLOAD) {
|
|
if (state)
|
|
a52_free(state);
|
|
}
|
|
|
|
return CODEC_OK;
|
|
}
|
|
|
|
/* this is called for each file to process */
|
|
enum codec_status codec_run(void)
|
|
{
|
|
size_t n;
|
|
uint8_t *filebuf;
|
|
int consumed, packet_offset;
|
|
int playback_on = -1;
|
|
size_t resume_offset;
|
|
intptr_t param;
|
|
enum codec_command_action action = CODEC_ACTION_NULL;
|
|
|
|
if (codec_init()) {
|
|
return CODEC_ERROR;
|
|
}
|
|
|
|
resume_offset = ci->id3->offset;
|
|
|
|
ci->configure(DSP_SWITCH_FREQUENCY, ci->id3->frequency);
|
|
codec_set_replaygain(ci->id3);
|
|
|
|
ci->seek_buffer(ci->id3->first_frame_offset);
|
|
|
|
/* Intializations */
|
|
state = a52_init(0);
|
|
ci->memset(&rmctx,0,sizeof(RMContext));
|
|
ci->memset(&pkt,0,sizeof(RMPacket));
|
|
init_rm(&rmctx);
|
|
|
|
/* check for a mid-track resume and force a seek time accordingly */
|
|
if(resume_offset > rmctx.data_offset + DATA_HEADER_SIZE) {
|
|
resume_offset -= rmctx.data_offset + DATA_HEADER_SIZE;
|
|
/* put number of subpackets to skip in resume_offset */
|
|
resume_offset /= (rmctx.block_align + PACKET_HEADER_SIZE);
|
|
param = (int)resume_offset * ((rmctx.block_align * 8 * 1000)/rmctx.bit_rate);
|
|
action = CODEC_ACTION_SEEK_TIME;
|
|
}
|
|
else {
|
|
/* Seek to the first packet */
|
|
ci->set_elapsed(0);
|
|
ci->advance_buffer(rmctx.data_offset + DATA_HEADER_SIZE );
|
|
}
|
|
|
|
/* The main decoding loop */
|
|
while((unsigned)rmctx.audio_pkt_cnt < rmctx.nb_packets) {
|
|
if (action == CODEC_ACTION_NULL)
|
|
action = ci->get_command(¶m);
|
|
|
|
if (action == CODEC_ACTION_HALT)
|
|
break;
|
|
|
|
if (action == CODEC_ACTION_SEEK_TIME) {
|
|
packet_offset = param / ((rmctx.block_align*8*1000)/rmctx.bit_rate);
|
|
ci->seek_buffer(rmctx.data_offset + DATA_HEADER_SIZE +
|
|
packet_offset*(rmctx.block_align + PACKET_HEADER_SIZE));
|
|
rmctx.audio_pkt_cnt = packet_offset;
|
|
samplesdone = (rmctx.sample_rate/1000 * param);
|
|
ci->set_elapsed(samplesdone/(frequency/1000));
|
|
ci->seek_complete();
|
|
}
|
|
|
|
action = CODEC_ACTION_NULL;
|
|
|
|
filebuf = ci->request_buffer(&n, rmctx.block_align + PACKET_HEADER_SIZE);
|
|
consumed = rm_get_packet(&filebuf, &rmctx, &pkt);
|
|
|
|
if(consumed < 0 && playback_on != 0) {
|
|
if(playback_on == -1) {
|
|
/* Error only if packet-parsing failed and playback hadn't started */
|
|
DEBUGF("rm_get_packet failed\n");
|
|
return CODEC_ERROR;
|
|
}
|
|
else {
|
|
break;
|
|
}
|
|
}
|
|
|
|
playback_on = 1;
|
|
a52_decode_data(filebuf, filebuf + rmctx.block_align);
|
|
ci->advance_buffer(pkt.length);
|
|
}
|
|
|
|
return CODEC_OK;
|
|
}
|