f712c7ff36
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16455 a1c6a512-1295-4272-9138-f99709370657
408 lines
13 KiB
C
408 lines
13 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id: $
|
|
*
|
|
* Copyright (C) by Linux Kernel Developers
|
|
*
|
|
* Based on code from the Linux Kernel
|
|
* available at http://www.kernel.org
|
|
* Original file: <kernel>/include/linux/usb/ch9.h
|
|
*
|
|
* All files in this archive are subject to the GNU General Public License.
|
|
* See the file COPYING in the source tree root for full license agreement.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
|
|
/*
|
|
* This file holds USB constants and structures that are needed for
|
|
* USB device APIs. These are used by the USB device model, which is
|
|
* defined in chapter 9 of the USB 2.0 specification and in the
|
|
* Wireless USB 1.0 (spread around).
|
|
*
|
|
* USB 2.0 adds an additional "On The Go" (OTG) mode, which lets systems
|
|
* act either as a USB master/host or as a USB slave/device. That means
|
|
* the master and slave side APIs benefit from working well together.
|
|
*
|
|
* There's also "Wireless USB", using low power short range radios for
|
|
* peripheral interconnection but otherwise building on the USB framework.
|
|
*
|
|
* Note all descriptors are declared '__attribute__((packed))' so that:
|
|
*
|
|
* [a] they never get padded, either internally (USB spec writers
|
|
* probably handled that) or externally;
|
|
*
|
|
* [b] so that accessing bigger-than-a-bytes fields will never
|
|
* generate bus errors on any platform, even when the location of
|
|
* its descriptor inside a bundle isn't "naturally aligned", and
|
|
*
|
|
* [c] for consistency, removing all doubt even when it appears to
|
|
* someone that the two other points are non-issues for that
|
|
* particular descriptor type.
|
|
*/
|
|
|
|
#ifndef _CH9_H_
|
|
#define _CH9_H_
|
|
|
|
#include <inttypes.h>
|
|
|
|
/*
|
|
* USB directions
|
|
*
|
|
* This bit flag is used in endpoint descriptors' bEndpointAddress field.
|
|
* It's also one of three fields in control requests bRequestType.
|
|
*/
|
|
#define USB_DIR_OUT 0 /* to device */
|
|
#define USB_DIR_IN 0x80 /* to host */
|
|
|
|
/*
|
|
* USB types, the second of three bRequestType fields
|
|
*/
|
|
#define USB_TYPE_MASK (0x03 << 5)
|
|
#define USB_TYPE_STANDARD (0x00 << 5)
|
|
#define USB_TYPE_CLASS (0x01 << 5)
|
|
#define USB_TYPE_VENDOR (0x02 << 5)
|
|
#define USB_TYPE_RESERVED (0x03 << 5)
|
|
|
|
/*
|
|
* USB recipients, the third of three bRequestType fields
|
|
*/
|
|
#define USB_RECIP_MASK 0x1f
|
|
#define USB_RECIP_DEVICE 0x00
|
|
#define USB_RECIP_INTERFACE 0x01
|
|
#define USB_RECIP_ENDPOINT 0x02
|
|
#define USB_RECIP_OTHER 0x03
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/**
|
|
* struct usb_ctrlrequest - SETUP data for a USB device control request
|
|
* @bRequestType: matches the USB bmRequestType field
|
|
* @bRequest: matches the USB bRequest field
|
|
* @wValue: matches the USB wValue field (le16 byte order)
|
|
* @wIndex: matches the USB wIndex field (le16 byte order)
|
|
* @wLength: matches the USB wLength field (le16 byte order)
|
|
*/
|
|
struct usb_ctrlrequest {
|
|
uint8_t bRequestType;
|
|
uint8_t bRequest;
|
|
uint16_t wValue;
|
|
uint16_t wIndex;
|
|
uint16_t wLength;
|
|
} __attribute__ ((packed));
|
|
|
|
/*
|
|
* Standard requests, for the bRequest field of a SETUP packet.
|
|
*
|
|
* These are qualified by the bRequestType field, so that for example
|
|
* TYPE_CLASS or TYPE_VENDOR specific feature flags could be retrieved
|
|
* by a GET_STATUS request.
|
|
*/
|
|
#define USB_REQ_GET_STATUS 0x00
|
|
#define USB_REQ_CLEAR_FEATURE 0x01
|
|
#define USB_REQ_SET_FEATURE 0x03
|
|
#define USB_REQ_SET_ADDRESS 0x05
|
|
#define USB_REQ_GET_DESCRIPTOR 0x06
|
|
#define USB_REQ_SET_DESCRIPTOR 0x07
|
|
#define USB_REQ_GET_CONFIGURATION 0x08
|
|
#define USB_REQ_SET_CONFIGURATION 0x09
|
|
#define USB_REQ_GET_INTERFACE 0x0A
|
|
#define USB_REQ_SET_INTERFACE 0x0B
|
|
#define USB_REQ_SYNCH_FRAME 0x0C
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/*
|
|
* STANDARD DESCRIPTORS ... as returned by GET_DESCRIPTOR, or
|
|
* (rarely) accepted by SET_DESCRIPTOR.
|
|
*
|
|
* Note that all multi-byte values here are encoded in little endian
|
|
* byte order "on the wire". But when exposed through Linux-USB APIs,
|
|
* they've been converted to cpu byte order.
|
|
*/
|
|
|
|
/*
|
|
* Descriptor types ... USB 2.0 spec table 9.5
|
|
*/
|
|
#define USB_DT_DEVICE 0x01
|
|
#define USB_DT_CONFIG 0x02
|
|
#define USB_DT_STRING 0x03
|
|
#define USB_DT_INTERFACE 0x04
|
|
#define USB_DT_ENDPOINT 0x05
|
|
#define USB_DT_DEVICE_QUALIFIER 0x06
|
|
#define USB_DT_OTHER_SPEED_CONFIG 0x07
|
|
#define USB_DT_INTERFACE_POWER 0x08
|
|
/* these are from a minor usb 2.0 revision (ECN) */
|
|
#define USB_DT_OTG 0x09
|
|
#define USB_DT_DEBUG 0x0a
|
|
#define USB_DT_INTERFACE_ASSOCIATION 0x0b
|
|
/* these are from the Wireless USB spec */
|
|
#define USB_DT_SECURITY 0x0c
|
|
#define USB_DT_KEY 0x0d
|
|
#define USB_DT_ENCRYPTION_TYPE 0x0e
|
|
#define USB_DT_BOS 0x0f
|
|
#define USB_DT_DEVICE_CAPABILITY 0x10
|
|
#define USB_DT_WIRELESS_ENDPOINT_COMP 0x11
|
|
#define USB_DT_WIRE_ADAPTER 0x21
|
|
#define USB_DT_RPIPE 0x22
|
|
|
|
/* Conventional codes for class-specific descriptors. The convention is
|
|
* defined in the USB "Common Class" Spec (3.11). Individual class specs
|
|
* are authoritative for their usage, not the "common class" writeup.
|
|
*/
|
|
#define USB_DT_CS_DEVICE (USB_TYPE_CLASS | USB_DT_DEVICE)
|
|
#define USB_DT_CS_CONFIG (USB_TYPE_CLASS | USB_DT_CONFIG)
|
|
#define USB_DT_CS_STRING (USB_TYPE_CLASS | USB_DT_STRING)
|
|
#define USB_DT_CS_INTERFACE (USB_TYPE_CLASS | USB_DT_INTERFACE)
|
|
#define USB_DT_CS_ENDPOINT (USB_TYPE_CLASS | USB_DT_ENDPOINT)
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* USB_DT_DEVICE: Device descriptor */
|
|
struct usb_device_descriptor {
|
|
uint8_t bLength;
|
|
uint8_t bDescriptorType;
|
|
uint16_t bcdUSB;
|
|
uint8_t bDeviceClass;
|
|
uint8_t bDeviceSubClass;
|
|
uint8_t bDeviceProtocol;
|
|
uint8_t bMaxPacketSize0;
|
|
uint16_t idVendor;
|
|
uint16_t idProduct;
|
|
uint16_t bcdDevice;
|
|
uint8_t iManufacturer;
|
|
uint8_t iProduct;
|
|
uint8_t iSerialNumber;
|
|
uint8_t bNumConfigurations;
|
|
} __attribute__ ((packed));
|
|
|
|
#define USB_DT_DEVICE_SIZE 18
|
|
|
|
/*
|
|
* Device and/or Interface Class codes
|
|
* as found in bDeviceClass or bInterfaceClass
|
|
* and defined by www.usb.org documents
|
|
*/
|
|
#define USB_CLASS_PER_INTERFACE 0 /* for DeviceClass */
|
|
#define USB_CLASS_AUDIO 1
|
|
#define USB_CLASS_COMM 2
|
|
#define USB_CLASS_HID 3
|
|
#define USB_CLASS_PHYSICAL 5
|
|
#define USB_CLASS_STILL_IMAGE 6
|
|
#define USB_CLASS_PRINTER 7
|
|
#define USB_CLASS_MASS_STORAGE 8
|
|
#define USB_CLASS_HUB 9
|
|
#define USB_CLASS_CDC_DATA 0x0a
|
|
#define USB_CLASS_CSCID 0x0b /* chip+ smart card */
|
|
#define USB_CLASS_CONTENT_SEC 0x0d /* content security */
|
|
#define USB_CLASS_VIDEO 0x0e
|
|
#define USB_CLASS_WIRELESS_CONTROLLER 0xe0
|
|
#define USB_CLASS_MISC 0xef
|
|
#define USB_CLASS_APP_SPEC 0xfe
|
|
#define USB_CLASS_VENDOR_SPEC 0xff
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* USB_DT_CONFIG: Configuration descriptor information.
|
|
*
|
|
* USB_DT_OTHER_SPEED_CONFIG is the same descriptor, except that the
|
|
* descriptor type is different. Highspeed-capable devices can look
|
|
* different depending on what speed they're currently running. Only
|
|
* devices with a USB_DT_DEVICE_QUALIFIER have any OTHER_SPEED_CONFIG
|
|
* descriptors.
|
|
*/
|
|
struct usb_config_descriptor {
|
|
uint8_t bLength;
|
|
uint8_t bDescriptorType;
|
|
uint16_t wTotalLength;
|
|
uint8_t bNumInterfaces;
|
|
uint8_t bConfigurationValue;
|
|
uint8_t iConfiguration;
|
|
uint8_t bmAttributes;
|
|
uint8_t bMaxPower;
|
|
} __attribute__ ((packed));
|
|
|
|
#define USB_DT_CONFIG_SIZE 9
|
|
|
|
/* from config descriptor bmAttributes */
|
|
#define USB_CONFIG_ATT_ONE (1 << 7) /* must be set */
|
|
#define USB_CONFIG_ATT_SELFPOWER (1 << 6) /* self powered */
|
|
#define USB_CONFIG_ATT_WAKEUP (1 << 5) /* can wakeup */
|
|
#define USB_CONFIG_ATT_BATTERY (1 << 4) /* battery powered */
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* USB_DT_STRING: String descriptor */
|
|
struct usb_string_descriptor {
|
|
uint8_t bLength;
|
|
uint8_t bDescriptorType;
|
|
|
|
uint16_t wString[]; /* UTF-16LE encoded */
|
|
} __attribute__ ((packed));
|
|
|
|
/* note that "string" zero is special, it holds language codes that
|
|
* the device supports, not Unicode characters.
|
|
*/
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* USB_DT_INTERFACE: Interface descriptor */
|
|
struct usb_interface_descriptor {
|
|
uint8_t bLength;
|
|
uint8_t bDescriptorType;
|
|
|
|
uint8_t bInterfaceNumber;
|
|
uint8_t bAlternateSetting;
|
|
uint8_t bNumEndpoints;
|
|
uint8_t bInterfaceClass;
|
|
uint8_t bInterfaceSubClass;
|
|
uint8_t bInterfaceProtocol;
|
|
uint8_t iInterface;
|
|
} __attribute__ ((packed));
|
|
|
|
#define USB_DT_INTERFACE_SIZE 9
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* USB_DT_ENDPOINT: Endpoint descriptor */
|
|
struct usb_endpoint_descriptor {
|
|
uint8_t bLength;
|
|
uint8_t bDescriptorType;
|
|
|
|
uint8_t bEndpointAddress;
|
|
uint8_t bmAttributes;
|
|
uint16_t wMaxPacketSize;
|
|
uint8_t bInterval;
|
|
|
|
/* NOTE: these two are _only_ in audio endpoints. */
|
|
/* use USB_DT_ENDPOINT*_SIZE in bLength, not sizeof. */
|
|
//uint8_t bRefresh;
|
|
//uint8_t bSynchAddress;
|
|
} __attribute__ ((packed));
|
|
|
|
#define USB_DT_ENDPOINT_SIZE 7
|
|
#define USB_DT_ENDPOINT_AUDIO_SIZE 9 /* Audio extension */
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* USB_DT_DEVICE_QUALIFIER: Device Qualifier descriptor */
|
|
struct usb_qualifier_descriptor {
|
|
uint8_t bLength;
|
|
uint8_t bDescriptorType;
|
|
|
|
uint16_t bcdUSB;
|
|
uint8_t bDeviceClass;
|
|
uint8_t bDeviceSubClass;
|
|
uint8_t bDeviceProtocol;
|
|
uint8_t bMaxPacketSize0;
|
|
uint8_t bNumConfigurations;
|
|
uint8_t bRESERVED;
|
|
} __attribute__ ((packed));
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* USB_DT_OTG (from OTG 1.0a supplement) */
|
|
struct usb_otg_descriptor {
|
|
uint8_t bLength;
|
|
uint8_t bDescriptorType;
|
|
|
|
uint8_t bmAttributes; /* support for HNP, SRP, etc */
|
|
} __attribute__ ((packed));
|
|
|
|
/* from usb_otg_descriptor.bmAttributes */
|
|
#define USB_OTG_SRP (1 << 0)
|
|
#define USB_OTG_HNP (1 << 1) /* swap host/device roles */
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* USB_DT_DEBUG: for special highspeed devices, replacing serial console */
|
|
struct usb_debug_descriptor {
|
|
uint8_t bLength;
|
|
uint8_t bDescriptorType;
|
|
|
|
/* bulk endpoints with 8 byte maxpacket */
|
|
uint8_t bDebugInEndpoint;
|
|
uint8_t bDebugOutEndpoint;
|
|
};
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/*
|
|
* Endpoints
|
|
*/
|
|
#define USB_ENDPOINT_XFERTYPE_MASK 0x03 /* in bmAttributes */
|
|
#define USB_ENDPOINT_XFER_CONTROL 0
|
|
#define USB_ENDPOINT_XFER_ISOC 1
|
|
#define USB_ENDPOINT_XFER_BULK 2
|
|
#define USB_ENDPOINT_XFER_INT 3
|
|
|
|
enum usb_device_speed {
|
|
USB_SPEED_UNKNOWN = 0, /* enumerating */
|
|
USB_SPEED_LOW, USB_SPEED_FULL, /* usb 1.1 */
|
|
USB_SPEED_HIGH, /* usb 2.0 */
|
|
USB_SPEED_VARIABLE, /* wireless (usb 2.5) */
|
|
};
|
|
|
|
enum usb_device_state {
|
|
/* NOTATTACHED isn't in the USB spec, and this state acts
|
|
* the same as ATTACHED ... but it's clearer this way.
|
|
*/
|
|
USB_STATE_NOTATTACHED = 0,
|
|
|
|
/* chapter 9 and authentication (wireless) device states */
|
|
USB_STATE_ATTACHED,
|
|
USB_STATE_POWERED, /* wired */
|
|
USB_STATE_UNAUTHENTICATED, /* auth */
|
|
USB_STATE_RECONNECTING, /* auth */
|
|
USB_STATE_DEFAULT, /* limited function */
|
|
USB_STATE_ADDRESS,
|
|
USB_STATE_CONFIGURED, /* most functions */
|
|
|
|
USB_STATE_SUSPENDED
|
|
|
|
/* NOTE: there are actually four different SUSPENDED
|
|
* states, returning to POWERED, DEFAULT, ADDRESS, or
|
|
* CONFIGURED respectively when SOF tokens flow again.
|
|
*/
|
|
};
|
|
|
|
/* All standard descriptors have these 2 fields at the beginning */
|
|
struct usb_descriptor_header {
|
|
uint8_t bLength;
|
|
uint8_t bDescriptorType;
|
|
} __attribute__ ((packed));
|
|
|
|
/**
|
|
* struct usb_string - wraps a C string and its USB id
|
|
* @id:the (nonzero) ID for this string
|
|
* @s:the string, in UTF-8 encoding
|
|
*
|
|
* If you're using usb_gadget_get_string(), use this to wrap a string
|
|
* together with its ID.
|
|
*/
|
|
struct usb_string {
|
|
uint8_t id;
|
|
const char* s;
|
|
};
|
|
|
|
/**
|
|
* struct usb_gadget_strings - a set of USB strings in a given language
|
|
* @language:identifies the strings' language (0x0409 for en-us)
|
|
* @strings:array of strings with their ids
|
|
*
|
|
* If you're using usb_gadget_get_string(), use this to wrap all the
|
|
* strings for a given language.
|
|
*/
|
|
struct usb_gadget_strings {
|
|
uint16_t language; /* 0x0409 for en-us */
|
|
struct usb_string* strings;
|
|
};
|
|
|
|
#endif /*_CH9_H_*/
|