12cc3cc47c
- temporarily disable shutdown on low power - enable power button for minimal interaction (not shutdown yet) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16049 a1c6a512-1295-4272-9138-f99709370657
169 lines
4.5 KiB
C
169 lines
4.5 KiB
C
/*
|
|
* This config file is for the Olympus m:robe MR-100
|
|
*/
|
|
|
|
#define TARGET_TREE
|
|
|
|
/* until voltages are sorted out */
|
|
#define NO_LOW_BATTERY_SHUTDOWN
|
|
|
|
/* For Rolo and boot loader */
|
|
#define MODEL_NUMBER 23
|
|
#define MODEL_NAME "Olympus m:robe MR-100"
|
|
|
|
/* define this if you have a bitmap LCD display */
|
|
#define HAVE_LCD_BITMAP
|
|
|
|
/* define this if you have access to the quickscreen */
|
|
#define HAVE_QUICKSCREEN
|
|
|
|
/* define this if you have access to the pitchscreen */
|
|
#define HAVE_PITCHSCREEN
|
|
|
|
/* define this if you would like tagcache to build on this target */
|
|
#define HAVE_TAGCACHE
|
|
|
|
/* LCD dimensions */
|
|
#define LCD_WIDTH 160
|
|
#define LCD_HEIGHT 128
|
|
#define LCD_DEPTH 1
|
|
#define LCD_PIXELFORMAT VERTICAL_PACKING
|
|
|
|
/* define this if you can flip your LCD */
|
|
/*#define HAVE_LCD_FLIP*/
|
|
|
|
/* define this if you can invert the colours on your LCD */
|
|
/*#define HAVE_LCD_INVERT*/
|
|
|
|
/*#define IRAM_LCDFRAMEBUFFER IDATA_ATTR */ /* put the lcd frame buffer in IRAM */
|
|
|
|
#define CONFIG_KEYPAD MROBE100_PAD
|
|
|
|
/* Define this if you do software codec */
|
|
#define CONFIG_CODEC SWCODEC
|
|
|
|
/* define this if you have a real-time clock */
|
|
#ifndef BOOTLOADER
|
|
//#define CONFIG_RTC RTC_E8564
|
|
#endif
|
|
|
|
/* Define this if you have a software controlled poweroff */
|
|
#define HAVE_SW_POWEROFF
|
|
|
|
/* The number of bytes reserved for loadable codecs */
|
|
#define CODEC_SIZE 0x80000
|
|
|
|
/* The number of bytes reserved for loadable plugins */
|
|
#define PLUGIN_BUFFER_SIZE 0x80000
|
|
|
|
/* Wolfsom audio codec */
|
|
/* TODO: #define HAVE_WM8751 */
|
|
#define HAVE_WM8731
|
|
|
|
/* WM8731 has no tone controls, so we use the software ones */
|
|
#define HAVE_SW_TONE_CONTROLS
|
|
|
|
#define AB_REPEAT_ENABLE 1
|
|
|
|
/* Define this for LCD backlight available */
|
|
#define HAVE_BACKLIGHT
|
|
/* TODO #define HAVE_BACKLIGHT_BRIGHTNESS */
|
|
|
|
/* Main LCD backlight brightness range and defaults */
|
|
#define MIN_BRIGHTNESS_SETTING 1
|
|
#define MAX_BRIGHTNESS_SETTING 12
|
|
#define DEFAULT_BRIGHTNESS_SETTING 6
|
|
|
|
/* define this if you have a light associated with the buttons */
|
|
#define HAVE_BUTTON_LIGHT
|
|
|
|
#define BATTERY_CAPACITY_DEFAULT 720 /* default battery capacity */
|
|
|
|
#ifndef SIMULATOR
|
|
|
|
/* Define this if you have a PortalPlayer PP5020 */
|
|
#define CONFIG_CPU PP5020
|
|
|
|
/* Define this if you want to use the PP5020 i2c interface */
|
|
#define CONFIG_I2C I2C_PP5020
|
|
|
|
/* Type of mobile power */
|
|
#define CONFIG_BATTERY BATT_LIION750
|
|
#define BATTERY_CAPACITY_MIN 750 /* min. capacity selectable */
|
|
#define BATTERY_CAPACITY_MAX 750 /* max. capacity selectable */
|
|
#define BATTERY_CAPACITY_INC 0 /* capacity increment */
|
|
#define BATTERY_TYPES_COUNT 1 /* only one type */
|
|
|
|
/* Hardware controlled charging */
|
|
#define CONFIG_CHARGING CHARGING_SIMPLE
|
|
|
|
/* define this if the hardware can be powered off while charging */
|
|
#define HAVE_POWEROFF_WHILE_CHARGING
|
|
|
|
/* The start address index for ROM builds */
|
|
#define ROM_START 0x00000000
|
|
|
|
/* The size of the flash ROM */
|
|
#define FLASH_SIZE 0x100000
|
|
|
|
/* Define this to the CPU frequency */
|
|
#define CPU_FREQ 75000000
|
|
|
|
/* Type of LCD */
|
|
#define CONFIG_LCD LCD_MROBE100
|
|
|
|
/* Define this if your LCD can set contrast */
|
|
#define HAVE_LCD_CONTRAST
|
|
|
|
#define MIN_CONTRAST_SETTING 0
|
|
#define MAX_CONTRAST_SETTING 40
|
|
#define DEFAULT_CONTRAST_SETTING 20
|
|
|
|
/* Define this if your LCD can be enabled/disabled */
|
|
/* TODO: #define HAVE_LCD_ENABLE */
|
|
|
|
/* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
|
|
* should be defined as well.
|
|
* We can currently put the lcd to sleep but it won't wake up properly */
|
|
/*TODO: #define HAVE_LCD_SLEEP*/
|
|
|
|
/* We're able to shut off power to the HDD */
|
|
#define HAVE_ATA_POWER_OFF
|
|
|
|
/* #define USB_IPODSTYLE */
|
|
|
|
/* USB On-the-go */
|
|
#define CONFIG_USBOTG USBOTG_ARC
|
|
|
|
/* define this if the unit can be powered or charged via USB */
|
|
#define HAVE_USB_POWER
|
|
|
|
/* enable these for the experimental usb stack */
|
|
/* TODO: get correct ID's */
|
|
#define HAVE_USBSTACK
|
|
#define USB_VENDOR_ID 0x0B70
|
|
#define USB_PRODUCT_ID 0x00BA
|
|
|
|
/* Virtual LED (icon) */
|
|
#define CONFIG_LED LED_VIRTUAL
|
|
|
|
/* Define this if you have adjustable CPU frequency */
|
|
#define HAVE_ADJUSTABLE_CPU_FREQ
|
|
|
|
/* Define this if you can detect headphones */
|
|
#define HAVE_HEADPHONE_DETECTION
|
|
|
|
#define MI4_FORMAT
|
|
#define BOOTFILE_EXT "mi4"
|
|
#define BOOTFILE "rockbox." BOOTFILE_EXT
|
|
#define BOOTDIR "/.rockbox"
|
|
|
|
/* Offset ( in the firmware file's header ) to the file CRC and data.
|
|
Not used for the mrobe 100, since it boots an mi4 file, but needed
|
|
for compatibility. */
|
|
#define FIRMWARE_OFFSET_FILE_CRC 0x0
|
|
#define FIRMWARE_OFFSET_FILE_DATA 0x0
|
|
|
|
#define ICODE_ATTR_TREMOR_NOT_MDCT
|
|
|
|
#endif
|