1d6df54df2
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21205 a1c6a512-1295-4272-9138-f99709370657
1198 lines
35 KiB
C
1198 lines
35 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
*
|
|
* Copyright (C) 2003-2005 Jörg Hohensohn
|
|
*
|
|
* Alpine CD changer Project
|
|
* This is a feasibility study for Archos emulating an Alpine M-Bus CD changer.
|
|
*
|
|
* Currently it will do seeks and change tracks, but nothing like disks.
|
|
* The debug version shows a dump of the M-Bus communication on screen.
|
|
*
|
|
* Usage: Start plugin, it will stay in the background and do the emulation.
|
|
* You need to make an adapter with an 8-pin DIN plug for the radio at one end
|
|
* and a 4-ring 3.5 mm plug for the Archos headphone jack at the other.
|
|
* The Archos remote pin connects to the M-Bus, audio as usual.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
|
|
#include "plugin.h"
|
|
|
|
/* Only build for (correct) target */
|
|
#if CONFIG_CPU==SH7034 && !(CONFIG_STORAGE & STORAGE_MMC)
|
|
|
|
PLUGIN_HEADER
|
|
|
|
#ifdef HAVE_LCD_CHARCELLS /* player model */
|
|
#define LINES 2
|
|
#define COLUMNS 11
|
|
#else /* recorder models */
|
|
#define LINES 8
|
|
#define COLUMNS 32 /* can't really tell for proportional font */
|
|
#endif
|
|
|
|
/****************** imports ******************/
|
|
|
|
#include "sh7034.h"
|
|
#include "system.h"
|
|
|
|
/****************** constants ******************/
|
|
|
|
/* measured bit time on the M-Bus is 3.075 ms = 325.2 Hz */
|
|
#define MBUS_BAUDRATE 3252 /* make it 10 * bittime */
|
|
#define MBUS_STEP_FREQ (MBUS_BAUDRATE/2) /* 5 steps per bit */
|
|
#define MBUS_BIT_FREQ (MBUS_BAUDRATE/10) /* the true bit frequency again */
|
|
|
|
#define MBUS_MAX_SIZE 16 /* maximum length of an M-Bus packet, incl. checksum */
|
|
#define MBUS_RCV_QUEUESIZE 4 /* how many packets can be queued by receiver */
|
|
|
|
#define ERI1 (*((volatile unsigned long*)0x090001A0)) /* RX error */
|
|
#define RXI1 (*((volatile unsigned long*)0x090001A4)) /* RX */
|
|
|
|
#define PB10 0x0400
|
|
|
|
/* receive status */
|
|
#define RX_BUSY 0 /* reception in progress */
|
|
#define RX_RECEIVED 1 /* valid data available */
|
|
#define RX_FRAMING 2 /* frame error */
|
|
#define RX_OVERRUN 3 /* receiver overrun */
|
|
#define RX_PARITY 4 /* parity error */
|
|
#define RX_SYMBOL 5 /* invalid bit timing */
|
|
#define RX_OVERFLOW 6 /* buffer full */
|
|
#define RX_OVERLAP 7 /* receive interrupt while transmitting */
|
|
|
|
/* timer operation mode */
|
|
#define TM_OFF 0 /* not in use */
|
|
#define TM_TRANSMIT 1 /* periodic timer to transmit */
|
|
#define TM_RX_TIMEOUT 2 /* single shot for receive timeout */
|
|
|
|
/* emulation play state */
|
|
#define EMU_IDLE 0
|
|
#define EMU_PREPARING 1
|
|
#define EMU_STOPPED 2
|
|
#define EMU_PAUSED 3
|
|
#define EMU_PLAYING 4
|
|
#define EMU_SPINUP 5
|
|
#define EMU_FF 6
|
|
#define EMU_FR 7
|
|
|
|
|
|
/****************** prototypes ******************/
|
|
|
|
void timer_init(unsigned hz, unsigned to); /* setup static timer registers and values */
|
|
void timer_set_mode(int mode); /* define for what the timer should be used right now */
|
|
void timer4_isr(void); /* IMIA4 ISR */
|
|
|
|
void transmit_isr(void); /* 2nd level ISR for M-Bus transmission */
|
|
|
|
void uart_init(unsigned baudrate); /* UART setup */
|
|
void uart_rx_isr(void) __attribute__((interrupt_handler)); /* RXI1 ISR */
|
|
void uart_err_isr(void) __attribute__((interrupt_handler)); /* ERI1 ISR */
|
|
void receive_timeout_isr(void); /* 2nd level ISR for receiver timeout */
|
|
|
|
void mbus_init(void); /* prepare the M-Bus layer */
|
|
int mbus_send(unsigned char* p_msg, int digits); /* packet send */
|
|
int mbus_receive(unsigned char* p_msg, unsigned bufsize, int timeout); /* packet receive */
|
|
|
|
unsigned char calc_checksum(unsigned char* p_msg, int digits); /* make M-Bus checksum */
|
|
bool bit_test(unsigned char* buf, unsigned bit); /* test one bit of M-Bus packet */
|
|
void bit_set(unsigned char* buf, unsigned bit, bool val); /* set/clear one bit of M-Bus packet */
|
|
|
|
void print_scroll(char* string); /* implements a scrolling screen */
|
|
void dump_packet(char* dest, int dst_size, char* src, int n); /* convert packet to ASCII */
|
|
|
|
void emu_init(void); /* init changer emulation */
|
|
void emu_process_packet(unsigned char* mbus_msg, int msg_size); /* feed a received radio packet */
|
|
void emu_tick(void); /* for regular actions of the emulator */
|
|
|
|
int get_playtime(void); /* return the current track time in seconds */
|
|
int get_tracklength(void); /* return the total length of the current track */
|
|
void set_track(int selected);
|
|
int get_track(void); /* return the track number */
|
|
void set_play(void); /* start or resume playback */
|
|
void set_pause(void); /* pause playback */
|
|
void set_stop(void); /* stop playback */
|
|
void set_position(int seconds); /* seek */
|
|
void get_playmsg(void); /* update the play message with Rockbox info */
|
|
void get_diskmsg(void); /* update the disk status message with Rockbox info */
|
|
|
|
void sound_neutral(void); /* set to everything flat and 0 dB volume */
|
|
void sound_normal(void); /* return to user settings */
|
|
|
|
void thread(void); /* the thread running it all */
|
|
int main(const void* parameter); /* main loop */
|
|
enum plugin_status plugin_start(const void* parameter); /* entry */
|
|
|
|
|
|
/****************** data types ******************/
|
|
|
|
/* one entry in the receive queue */
|
|
typedef struct
|
|
{
|
|
unsigned char buf[MBUS_MAX_SIZE]; /* message buffer */
|
|
unsigned size; /* length of data in the buffer */
|
|
unsigned error; /* error code from reception */
|
|
} t_rcv_queue_entry;
|
|
|
|
|
|
/****************** globals ******************/
|
|
|
|
|
|
/* information owned by the timer transmit ISR */
|
|
struct
|
|
{
|
|
unsigned char send_buf[MBUS_MAX_SIZE]; /* M-Bus message */
|
|
unsigned send_size; /* current length of data in the buffer */
|
|
unsigned index; /* index for which byte to send */
|
|
unsigned byte; /* which byte to send */
|
|
unsigned bitmask; /* which bit to send */
|
|
unsigned step; /* where in the pulse are we */
|
|
bool bit; /* currently sent bit */
|
|
bool collision; /* set if a collision happened */
|
|
bool busy; /* flag if in transmission */
|
|
} gSendIRQ;
|
|
|
|
|
|
/* information owned by the UART receive ISR */
|
|
struct
|
|
{
|
|
t_rcv_queue_entry queue[MBUS_RCV_QUEUESIZE]; /* M-Bus message queue */
|
|
unsigned buf_read; /* readout maintained by the user application */
|
|
unsigned buf_write; /* writing maintained by ISR */
|
|
bool overflow; /* indicate queue overflow */
|
|
unsigned byte; /* currently assembled byte */
|
|
unsigned bit; /* which bit to receive */
|
|
} gRcvIRQ;
|
|
|
|
|
|
/* information owned by the timer */
|
|
struct
|
|
{
|
|
unsigned mode; /* off, transmit, receive timout */
|
|
unsigned transmit; /* value for transmit */
|
|
unsigned timeout; /* value for receive timeout */
|
|
} gTimer;
|
|
|
|
|
|
/* information owned by the changer emulation */
|
|
struct
|
|
{
|
|
unsigned char playmsg[15]; /* current play state msg */
|
|
unsigned char changemsg[11]; /* changing message */
|
|
unsigned char diskmsg[12]; /* disk status message */
|
|
long poll_interval; /* call the emu each n ticks */
|
|
int time; /* seconds within the song */
|
|
int set_state; /* the desired state to change into */
|
|
} gEmu;
|
|
|
|
|
|
/* communication to the worker thread */
|
|
struct
|
|
{
|
|
bool foreground; /* set as long as we're owning the UI */
|
|
bool exiting; /* signal to the thread that we want to exit */
|
|
unsigned int thread; /* worker thread id */
|
|
} gTread;
|
|
|
|
|
|
/****************** implementation ******************/
|
|
|
|
|
|
/* setup static timer registers and values */
|
|
void timer_init(unsigned hz, unsigned to)
|
|
{
|
|
rb->memset(&gTimer, 0, sizeof(gTimer));
|
|
|
|
gTimer.transmit = TIMER_FREQ / hz; /* time for bit transitions */
|
|
gTimer.timeout = TIMER_FREQ / to; /* time for receive timeout */
|
|
}
|
|
|
|
|
|
/* define for what the timer should be used right now */
|
|
void timer_set_mode(int mode)
|
|
{
|
|
TCNT4 = 0; /* start counting at 0 */
|
|
gTimer.mode = mode; /* store the mode */
|
|
|
|
if (mode == TM_RX_TIMEOUT)
|
|
{
|
|
rb->timer_register(1, NULL, gTimer.timeout, 11, timer4_isr IF_COP(, CPU));
|
|
}
|
|
else if (mode == TM_TRANSMIT)
|
|
{
|
|
rb->timer_register(1, NULL, gTimer.transmit, 14, timer4_isr IF_COP(, CPU));
|
|
}
|
|
else
|
|
{
|
|
rb->timer_unregister();
|
|
}
|
|
}
|
|
|
|
|
|
void timer4_isr(void) /* IMIA4 */
|
|
{
|
|
switch (gTimer.mode)
|
|
{ /* distribute the interrupt */
|
|
case TM_TRANSMIT:
|
|
transmit_isr();
|
|
break;
|
|
case TM_RX_TIMEOUT:
|
|
receive_timeout_isr();
|
|
rb->timer_unregister(); /* single shot */
|
|
break;
|
|
default:
|
|
timer_set_mode(TM_OFF); /* spurious interrupt */
|
|
} /* switch */
|
|
}
|
|
|
|
|
|
/* About Alpine M-Bus
|
|
* ------------------
|
|
*
|
|
* The protocol uses a single wire in half duplex mode.
|
|
* A bit like I2C, this wire is either pulled low or left floating high.
|
|
* Bit time is ~3 ms, a "zero" is coded as ~0.6 ms low, a "one" as ~1.8 ms low.
|
|
* Nice to view in a 0.6 ms grid:
|
|
*
|
|
* 0 0.6 1.2 1.8 2.4 3.0
|
|
* | | | | | |
|
|
* __ ___________________
|
|
* \____/ \ "zero" bit
|
|
* __ _________
|
|
* \______________/ \ "one" bit
|
|
*
|
|
* So I send out the data in a timer interrupt spawned to 0.6 ms.
|
|
* In phases where the line is floating high, I can check for collisions.
|
|
* (happens if the other side driving it low, too.)
|
|
*
|
|
* Data is transmitted in multiples of 4 bit, to ease BCD representation.
|
|
*/
|
|
|
|
|
|
/* 2nd level ISR for M-Bus transmission */
|
|
void transmit_isr(void)
|
|
{
|
|
bool exit = false;
|
|
|
|
TSR4 &= ~0x01; /* clear the interrupt */
|
|
|
|
switch(gSendIRQ.step++)
|
|
{
|
|
case 0:
|
|
and_b(~0x04, &PBDRH); /* low (read-modify-write access may have changed it while it was input) */
|
|
or_b(0x04, &PBIORH); /* drive low (output) */
|
|
break;
|
|
case 1: /* 0.6 ms */
|
|
if (!gSendIRQ.bit) /* sending "zero"? */
|
|
and_b(~0x04, &PBIORH); /* float (input) */
|
|
break;
|
|
case 2: /* 1.2 ms */
|
|
if (!gSendIRQ.bit && ((PBDR & PB10) == 0))
|
|
gSendIRQ.collision = true;
|
|
break;
|
|
case 3: /* 1.8 ms */
|
|
if (gSendIRQ.bit) /* sending "one"? */
|
|
and_b(~0x04, &PBIORH); /* float (input) */
|
|
else if ((PBDR & PB10) == 0)
|
|
gSendIRQ.collision = true;
|
|
break;
|
|
case 4: /* 2.4 ms */
|
|
if ((PBDR & PB10) == 0)
|
|
gSendIRQ.collision = true;
|
|
|
|
/* prepare next round */
|
|
gSendIRQ.step = 0;
|
|
gSendIRQ.bitmask >>= 1;
|
|
if (gSendIRQ.bitmask)
|
|
{ /* new bit */
|
|
gSendIRQ.bit = (gSendIRQ.byte & gSendIRQ.bitmask) != 0;
|
|
}
|
|
else
|
|
{ /* new byte */
|
|
if (++gSendIRQ.index < gSendIRQ.send_size)
|
|
{
|
|
gSendIRQ.bitmask = 0x08;
|
|
gSendIRQ.byte = gSendIRQ.send_buf[gSendIRQ.index];
|
|
gSendIRQ.bit = (gSendIRQ.byte & gSendIRQ.bitmask) != 0;
|
|
}
|
|
else
|
|
exit = true; /* done */
|
|
}
|
|
break;
|
|
}
|
|
|
|
if (exit || gSendIRQ.collision)
|
|
{ /* stop transmission */
|
|
or_b(0x20, PBCR1_ADDR+1); /* RxD1 again for PB10 */
|
|
timer_set_mode(TM_OFF); /* stop the timer */
|
|
gSendIRQ.busy = false; /* do this last, to avoid race conditions */
|
|
}
|
|
}
|
|
|
|
|
|
/* For receiving, I use the "normal" serial RX feature of the CPU,
|
|
* so we can receive within an interrupt, no line polling necessary.
|
|
* Luckily, the M-Bus bit always starts with a falling edge and ends with a high,
|
|
* this matches with the start bit and the stop bit of a serial transmission.
|
|
* The baudrate is set such that the M-Bus bit time (ca. 3ms) matches
|
|
* the serial reception time of one byte, so we receive one byte per
|
|
* M-Bus bit.
|
|
* Start bit, 8 data bits and stop bit (total=10) nicely fall into the 5
|
|
* phases like above:
|
|
*
|
|
* 0 0.6 1.2 1.8 2.4 3.0 ms
|
|
* | | | | | | time
|
|
* __ _______________________________
|
|
* \_______/ \ "zero" bit
|
|
* __ _______________
|
|
* \_______________________/ \ "one" bit
|
|
*
|
|
* | | | | | | | | | | | serial sampling interval
|
|
* Start 0 1 2 3 4 5 6 7 Stop bit (LSB first!)
|
|
*
|
|
* By looking at the bit pattern in the serial byte we can distinguish
|
|
* the short low from the longer low, tell "zero" and "one" apart.
|
|
* So we receive 0xFE for a "zero", 0xE0 for a "one".
|
|
* It may be necessary to treat the bits next to transitions as don't care,
|
|
* in case the timing is not so accurate.
|
|
* Bits are always sent "back-to-back", so I detect the packet end by timeout.
|
|
*/
|
|
|
|
|
|
void uart_init(unsigned baudrate)
|
|
{
|
|
RXI1 = (unsigned long)uart_rx_isr; /* install ISR */
|
|
ERI1 = (unsigned long)uart_err_isr; /* install ISR */
|
|
|
|
SCR1 = 0x00; /* disable everything; select async mode with SCK pin as I/O */
|
|
SMR1 = 0x00; /* async, 8N1, NoMultiProc, sysclock/1 */
|
|
BRR1 = ((FREQ/(32*baudrate))-1);
|
|
|
|
IPRE = (IPRE & ~0xf000) | 0xc000; /* interrupt on level 12 */
|
|
|
|
rb->sleep(1); /* hardware needs to settle for at least one bit interval */
|
|
|
|
and_b(~(SCI_RDRF | SCI_ORER | SCI_FER | SCI_PER), &SSR1); /* clear any receiver flag */
|
|
or_b(SCI_RE | SCI_RIE , &SCR1); /* enable the receiver with interrupt */
|
|
}
|
|
|
|
|
|
void uart_rx_isr(void) /* RXI1 */
|
|
{
|
|
unsigned char data;
|
|
t_rcv_queue_entry* p_entry = &gRcvIRQ.queue[gRcvIRQ.buf_write]; /* short cut */
|
|
|
|
data = RDR1; /* get data */
|
|
|
|
and_b(~SCI_RDRF, &SSR1); /* clear data received flag */
|
|
|
|
if (gTimer.mode == TM_TRANSMIT)
|
|
p_entry->error = RX_OVERLAP; /* oops, we're also transmitting, stop */
|
|
else
|
|
timer_set_mode(TM_RX_TIMEOUT); /* (re)spawn timeout */
|
|
|
|
if (p_entry->error != RX_BUSY)
|
|
return;
|
|
|
|
if ((data & ~0x00) == 0xFE) /* 01111111 in line order (reverse) */
|
|
{ /* "zero" received */
|
|
gRcvIRQ.byte <<= 1;
|
|
}
|
|
else if ((data & ~0x00) == 0xE0) /* 00000111 in line order (reverse) */
|
|
{ /* "one" received */
|
|
gRcvIRQ.byte = gRcvIRQ.byte << 1 | 0x01;
|
|
}
|
|
else
|
|
{ /* unrecognized pulse */
|
|
p_entry->error = RX_SYMBOL;
|
|
}
|
|
|
|
if (p_entry->error == RX_BUSY)
|
|
{
|
|
if (++gRcvIRQ.bit >= 4)
|
|
{ /* byte completed */
|
|
if (p_entry->size >= sizeof(p_entry->buf))
|
|
{
|
|
p_entry->error = RX_OVERFLOW; /* buffer full */
|
|
}
|
|
else
|
|
{
|
|
p_entry->buf[p_entry->size] = gRcvIRQ.byte;
|
|
gRcvIRQ.byte = 0;
|
|
gRcvIRQ.bit = 0;
|
|
p_entry->size++;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
void uart_err_isr(void) /* ERI1 */
|
|
{
|
|
t_rcv_queue_entry* p_entry = &gRcvIRQ.queue[gRcvIRQ.buf_write]; /* short cut */
|
|
|
|
if (p_entry->error == RX_BUSY)
|
|
{ /* terminate reception in case of error */
|
|
if (SSR1 & SCI_FER)
|
|
p_entry->error = RX_FRAMING;
|
|
else if (SSR1 & SCI_ORER)
|
|
p_entry->error = RX_OVERRUN;
|
|
else if (SSR1 & SCI_PER)
|
|
p_entry->error = RX_PARITY;
|
|
}
|
|
|
|
/* clear any receiver flag */
|
|
and_b(~(SCI_RDRF | SCI_ORER | SCI_FER | SCI_PER), &SSR1);
|
|
}
|
|
|
|
|
|
/* 2nd level ISR for receiver timeout, this finalizes reception */
|
|
void receive_timeout_isr(void)
|
|
{
|
|
t_rcv_queue_entry* p_entry = &gRcvIRQ.queue[gRcvIRQ.buf_write]; /* short cut */
|
|
|
|
timer_set_mode(TM_OFF); /* single shot */
|
|
|
|
if (p_entry->error == RX_BUSY) /* everthing OK so far? */
|
|
p_entry->error = RX_RECEIVED; /* end with valid data */
|
|
|
|
/* move to next queue entry */
|
|
gRcvIRQ.buf_write++;
|
|
if (gRcvIRQ.buf_write >= MBUS_RCV_QUEUESIZE)
|
|
gRcvIRQ.buf_write = 0;
|
|
p_entry = &gRcvIRQ.queue[gRcvIRQ.buf_write];
|
|
|
|
if (gRcvIRQ.buf_write == gRcvIRQ.buf_read)
|
|
{ /* queue overflow */
|
|
gRcvIRQ.overflow = true;
|
|
/* what can I do? Continueing overwrites the oldest. */
|
|
}
|
|
|
|
gRcvIRQ.byte = 0;
|
|
gRcvIRQ.bit = 0;
|
|
p_entry->size = 0;
|
|
p_entry->error = RX_BUSY; /* enable receive on new entry */
|
|
}
|
|
|
|
|
|
/* generate the checksum */
|
|
unsigned char calc_checksum(unsigned char* p_msg, int digits)
|
|
{
|
|
int chk = 0;
|
|
int i;
|
|
|
|
for (i=0; i<digits; i++)
|
|
{
|
|
chk ^= p_msg[i];
|
|
}
|
|
chk = (chk+1) % 16;
|
|
|
|
return chk;
|
|
}
|
|
|
|
|
|
/****************** high-level M-Bus functions ******************/
|
|
|
|
void mbus_init(void)
|
|
{
|
|
/* init the send object */
|
|
rb->memset(&gSendIRQ, 0, sizeof(gSendIRQ));
|
|
timer_init(MBUS_STEP_FREQ, (MBUS_BIT_FREQ*10)/15); /* setup frequency and timeout (1.5 bit) */
|
|
|
|
/* init receiver */
|
|
rb->memset(&gRcvIRQ, 0, sizeof(gRcvIRQ));
|
|
uart_init(MBUS_BAUDRATE);
|
|
}
|
|
|
|
|
|
/* send out a number of BCD digits (one per byte) with M-Bus protocol */
|
|
int mbus_send(unsigned char* p_msg, int digits)
|
|
{
|
|
/* wait for previous transmit/receive to end */
|
|
while(gTimer.mode != TM_OFF) /* wait for "free line" */
|
|
rb->sleep(1);
|
|
|
|
/* fill in our part */
|
|
rb->memcpy(gSendIRQ.send_buf, p_msg, digits);
|
|
|
|
/* add checksum */
|
|
gSendIRQ.send_buf[digits] = calc_checksum(p_msg, digits);
|
|
digits++;
|
|
|
|
/* debug dump, to be removed */
|
|
if (gTread.foreground)
|
|
{
|
|
char buf[MBUS_MAX_SIZE+1];
|
|
dump_packet(buf, sizeof(buf), gSendIRQ.send_buf, digits);
|
|
/*print_scroll(buf); */
|
|
}
|
|
|
|
gSendIRQ.send_size = digits;
|
|
|
|
/* prepare everything so the ISR can start right away */
|
|
gSendIRQ.index = 0;
|
|
gSendIRQ.byte = gSendIRQ.send_buf[0];
|
|
gSendIRQ.bitmask = 0x08;
|
|
gSendIRQ.step = 0;
|
|
gSendIRQ.bit = (gSendIRQ.byte & gSendIRQ.bitmask) != 0;
|
|
gSendIRQ.collision = false;
|
|
gSendIRQ.busy = true;
|
|
|
|
/* last chance to wait for a new detected receive to end */
|
|
while(gTimer.mode != TM_OFF) /* wait for "free line" */
|
|
rb->sleep(1);
|
|
|
|
and_b(~0x30, PBCR1_ADDR+1); /* GPIO for PB10 */
|
|
timer_set_mode(TM_TRANSMIT); /* run */
|
|
|
|
/* make the call blocking until sent out */
|
|
rb->sleep(digits*4*HZ/MBUS_BIT_FREQ); /* should take this long */
|
|
|
|
while(gSendIRQ.busy) /* poll in case it lasts longer */
|
|
rb->sleep(1); /* (should not happen) */
|
|
|
|
/* debug output, to be removed */
|
|
if (gTread.foreground)
|
|
{
|
|
if (gSendIRQ.collision)
|
|
print_scroll("collision");
|
|
}
|
|
|
|
return gSendIRQ.collision;
|
|
}
|
|
|
|
|
|
/* returns the size of message copy, 0 if timed out, negative on error */
|
|
int mbus_receive(unsigned char* p_msg, unsigned bufsize, int timeout)
|
|
{
|
|
int retval = 0;
|
|
|
|
do
|
|
{
|
|
if (gRcvIRQ.buf_read != gRcvIRQ.buf_write)
|
|
{ /* something in the queue */
|
|
t_rcv_queue_entry* p_entry = &gRcvIRQ.queue[gRcvIRQ.buf_read]; /* short cut */
|
|
|
|
if (p_entry->error == RX_RECEIVED)
|
|
{ /* seems valid */
|
|
rb->memcpy(p_msg, p_entry->buf, MIN(p_entry->size, bufsize));
|
|
retval = p_entry->size; /* return message size */
|
|
}
|
|
else
|
|
{ /* an error occured */
|
|
retval = - p_entry->error; /* return negative number */
|
|
}
|
|
|
|
/* next queue readout position */
|
|
gRcvIRQ.buf_read++;
|
|
if (gRcvIRQ.buf_read >= MBUS_RCV_QUEUESIZE)
|
|
gRcvIRQ.buf_read = 0;
|
|
|
|
return retval; /* exit */
|
|
}
|
|
|
|
if (timeout != 0 || gTimer.mode != TM_OFF) /* also carry on if reception in progress */
|
|
{
|
|
if (timeout != -1 && timeout != 0) /* if not infinite or expired */
|
|
timeout--;
|
|
|
|
rb->sleep(1); /* wait a while */
|
|
}
|
|
|
|
} while (timeout != 0 || gTimer.mode != TM_OFF);
|
|
|
|
return 0; /* timeout */
|
|
}
|
|
|
|
|
|
/****************** MMI helper fuctions ******************/
|
|
|
|
|
|
void print_scroll(char* string)
|
|
{
|
|
static char screen[LINES][COLUMNS+1]; /* visible strings */
|
|
static unsigned pos = 0; /* next print position */
|
|
static unsigned screentop = 0; /* for scrolling */
|
|
|
|
if (!gTread.foreground)
|
|
return; /* just to protect careless callers */
|
|
|
|
if (pos >= LINES)
|
|
{ /* need to scroll first */
|
|
int i;
|
|
rb->lcd_clear_display();
|
|
screentop++;
|
|
for (i=0; i<LINES-1; i++)
|
|
rb->lcd_puts(0, i, screen[(i+screentop) % LINES]);
|
|
|
|
pos = LINES-1;
|
|
}
|
|
|
|
/* no strncpy avail. */
|
|
rb->snprintf(screen[(pos+screentop) % LINES], sizeof(screen[0]), "%s", string);
|
|
|
|
rb->lcd_puts(0, pos, screen[(pos+screentop) % LINES]);
|
|
rb->lcd_update();
|
|
pos++;
|
|
}
|
|
|
|
|
|
void dump_packet(char* dest, int dst_size, char* src, int n)
|
|
{
|
|
int i;
|
|
int len = MIN(dst_size-1, n);
|
|
|
|
for (i=0; i<len; i++)
|
|
{ /* convert to hex digits */
|
|
dest[i] = src[i] < 10 ? '0' + src[i] : 'A' + src[i] - 10;
|
|
}
|
|
dest[i] = '\0'; /* zero terminate string */
|
|
}
|
|
|
|
|
|
/****************** CD changer emulation ******************/
|
|
|
|
bool bit_test(unsigned char* buf, unsigned bit)
|
|
{
|
|
return (buf[bit>>2] & BIT_N(bit&3)) != 0;
|
|
}
|
|
|
|
|
|
void bit_set(unsigned char* buf, unsigned bit, bool val)
|
|
{
|
|
if (val)
|
|
buf[bit>>2] |= BIT_N(bit&3);
|
|
else
|
|
buf[bit>>2] &= ~BIT_N(bit&3);
|
|
}
|
|
|
|
|
|
void emu_init(void)
|
|
{
|
|
rb->memset(&gEmu, 0, sizeof(gEmu));
|
|
|
|
gEmu.poll_interval = HZ;
|
|
|
|
/* init the play message to 990000000000000 */
|
|
gEmu.playmsg[0] = gEmu.playmsg[1] = 0x9;
|
|
|
|
/* init the changing message to 9B900000001 */
|
|
gEmu.changemsg[0] = gEmu.changemsg[2] = 0x9;
|
|
gEmu.changemsg[1] = 0xB;
|
|
gEmu.changemsg[10] = 0x1;
|
|
|
|
/* init the disk status message to 9C1019999990 */
|
|
rb->memset(&gEmu.diskmsg, 0x9, sizeof(gEmu.diskmsg));
|
|
gEmu.diskmsg[1] = 0xC;
|
|
gEmu.diskmsg[2] = gEmu.diskmsg[4] = 0x1;
|
|
gEmu.diskmsg[3] = gEmu.diskmsg[11] = 0x0;
|
|
}
|
|
|
|
/* feed a radio command into the emulator */
|
|
void emu_process_packet(unsigned char* mbus_msg, int msg_size)
|
|
{
|
|
bool playmsg_dirty = false;
|
|
bool diskmsg_dirty = false;
|
|
|
|
if (msg_size == 2 && mbus_msg[0] == 1 && mbus_msg[1] == 8)
|
|
{ /* 18: ping */
|
|
mbus_send("\x09\x08", 2); /* 98: ping OK */
|
|
}
|
|
else if (msg_size == 5 && mbus_msg[0] == 1 && mbus_msg[1] == 1 && mbus_msg[2] == 1)
|
|
{ /* set play state */
|
|
if (bit_test(mbus_msg, 16))
|
|
{
|
|
if (gEmu.set_state == EMU_FF || gEmu.set_state == EMU_FR) /* was seeking? */
|
|
{ /* seek to final position */
|
|
set_position(gEmu.time);
|
|
}
|
|
else if (gEmu.set_state != EMU_PLAYING || gEmu.set_state != EMU_PAUSED)
|
|
{ /* was not playing yet, better send disk message */
|
|
diskmsg_dirty = true;
|
|
}
|
|
set_play();
|
|
gEmu.set_state = EMU_PLAYING;
|
|
playmsg_dirty = true;
|
|
}
|
|
|
|
if (bit_test(mbus_msg, 17))
|
|
{
|
|
gEmu.set_state = EMU_PAUSED;
|
|
playmsg_dirty = true;
|
|
set_pause();
|
|
}
|
|
|
|
if (bit_test(mbus_msg, 14))
|
|
{
|
|
gEmu.set_state = EMU_STOPPED;
|
|
playmsg_dirty = true;
|
|
set_stop();
|
|
}
|
|
|
|
if (bit_test(mbus_msg, 18))
|
|
{
|
|
gEmu.set_state = EMU_FF;
|
|
playmsg_dirty = true;
|
|
set_pause();
|
|
}
|
|
|
|
if (bit_test(mbus_msg, 19))
|
|
{
|
|
gEmu.set_state = EMU_FR;
|
|
playmsg_dirty = true;
|
|
set_pause();
|
|
}
|
|
|
|
if (bit_test(mbus_msg, 12)) /* scan stop */
|
|
{
|
|
bit_set(gEmu.playmsg, 51, false);
|
|
playmsg_dirty = true;
|
|
}
|
|
|
|
if (gEmu.set_state == EMU_FF || gEmu.set_state == EMU_FR)
|
|
gEmu.poll_interval = HZ/4; /* faster refresh */
|
|
else
|
|
gEmu.poll_interval = HZ;
|
|
}
|
|
else if (msg_size == 8 && mbus_msg[0] == 1 && mbus_msg[1] == 1 && mbus_msg[2] == 4)
|
|
{ /* set program mode */
|
|
gEmu.playmsg[11] = mbus_msg[3]; /* copy repeat, random, intro */
|
|
gEmu.playmsg[12] = mbus_msg[4]; /* ToDo */
|
|
playmsg_dirty = true;
|
|
}
|
|
else if (msg_size ==8 && mbus_msg[0] == 1 && mbus_msg[1] == 1 && mbus_msg[2] == 3)
|
|
{ /* changing */
|
|
gEmu.time = 0; /* reset playtime */
|
|
playmsg_dirty = true;
|
|
if (mbus_msg[3] == 0)
|
|
{ /* changing track */
|
|
if (mbus_msg[4] == 0xA && mbus_msg[5] == 0x3)
|
|
{ /* next random */
|
|
gEmu.playmsg[3] = rb->rand() % 10; /* ToDo */
|
|
gEmu.playmsg[4] = rb->rand() % 10;
|
|
}
|
|
else if (mbus_msg[4] == 0xB && mbus_msg[5] == 0x3)
|
|
{ /* previous random */
|
|
gEmu.playmsg[3] = rb->rand() % 10; /* ToDo */
|
|
gEmu.playmsg[4] = rb->rand() % 10;
|
|
}
|
|
else
|
|
{ /* normal track select */
|
|
set_track(mbus_msg[4]*10 + mbus_msg[5]);
|
|
}
|
|
}
|
|
else
|
|
{ /* changing disk */
|
|
diskmsg_dirty = true;
|
|
gEmu.changemsg[3] = mbus_msg[3]; /* copy disk */
|
|
gEmu.diskmsg[2] = mbus_msg[3];
|
|
gEmu.changemsg[7] = gEmu.playmsg[11]; /* copy flags from status */
|
|
gEmu.changemsg[8] = gEmu.playmsg[12];
|
|
/*gEmu.playmsg[3] = 0; */ /* reset to track 1 */
|
|
/*gEmu.playmsg[4] = 1; */
|
|
mbus_send(gEmu.changemsg, sizeof(gEmu.changemsg));
|
|
}
|
|
}
|
|
else
|
|
{ /* if in doubt, send Ack */
|
|
mbus_send("\x09\x0F\x00\x00\x00\x00\x00", 7);
|
|
}
|
|
|
|
if (playmsg_dirty)
|
|
{
|
|
rb->yield(); /* give the audio thread a chance to process */
|
|
get_playmsg(); /* force update */
|
|
mbus_send(gEmu.playmsg, sizeof(gEmu.playmsg));
|
|
}
|
|
|
|
if (diskmsg_dirty)
|
|
{
|
|
get_diskmsg(); /* force update */
|
|
mbus_send(gEmu.diskmsg, sizeof(gEmu.diskmsg));
|
|
}
|
|
}
|
|
|
|
|
|
/* called each second in case the emulator has something to do */
|
|
void emu_tick(void)
|
|
{
|
|
get_playmsg(); /* force update */
|
|
if (bit_test(gEmu.playmsg, 56)) /* play bit */
|
|
{
|
|
unsigned remain; /* helper as we walk down the digits */
|
|
|
|
switch(gEmu.set_state)
|
|
{
|
|
case EMU_FF:
|
|
gEmu.time += 10;
|
|
case EMU_FR:
|
|
gEmu.time -= 5;
|
|
|
|
if (gEmu.time < 0)
|
|
gEmu.time = 0;
|
|
else if (gEmu.time > get_tracklength())
|
|
gEmu.time = get_tracklength();
|
|
|
|
/* convert value to MM:SS */
|
|
remain = (unsigned)gEmu.time;
|
|
gEmu.playmsg[7] = remain / (10*60);
|
|
remain -= gEmu.playmsg[7] * (10*60);
|
|
gEmu.playmsg[8] = remain / 60;
|
|
remain -= gEmu.playmsg[8] * 60;
|
|
gEmu.playmsg[9] = remain / 10;
|
|
remain -= gEmu.playmsg[9] * 10;
|
|
gEmu.playmsg[10] = remain;
|
|
}
|
|
|
|
mbus_send(gEmu.playmsg, sizeof(gEmu.playmsg));
|
|
}
|
|
}
|
|
|
|
|
|
/****************** communication with Rockbox playback ******************/
|
|
|
|
|
|
/* update the play message with Rockbox info */
|
|
void get_playmsg(void)
|
|
{
|
|
int track, time;
|
|
|
|
if (gEmu.set_state != EMU_FF && gEmu.set_state != EMU_FR)
|
|
{
|
|
switch(rb->audio_status())
|
|
{
|
|
case AUDIO_STATUS_PLAY:
|
|
print_scroll("AudioStat Play");
|
|
if (gEmu.set_state == EMU_FF || gEmu.set_state == EMU_FR)
|
|
gEmu.playmsg[2] = gEmu.set_state; /* set FF/FR */
|
|
else
|
|
gEmu.playmsg[2] = EMU_PLAYING; /* set normal play */
|
|
|
|
bit_set(gEmu.playmsg, 56, true); /* set play */
|
|
bit_set(gEmu.playmsg, 57, false); /* clear pause */
|
|
bit_set(gEmu.playmsg, 59, false); /* clear stop */
|
|
break;
|
|
|
|
case AUDIO_STATUS_PLAY | AUDIO_STATUS_PAUSE:
|
|
print_scroll("AudioStat Pause");
|
|
gEmu.playmsg[2] = EMU_PAUSED;
|
|
bit_set(gEmu.playmsg, 56, false); /* clear play */
|
|
bit_set(gEmu.playmsg, 57, true); /* set pause */
|
|
bit_set(gEmu.playmsg, 59, false); /* clear stop */
|
|
break;
|
|
|
|
default:
|
|
print_scroll("AudioStat 0");
|
|
gEmu.playmsg[2] = EMU_STOPPED;
|
|
bit_set(gEmu.playmsg, 56, false); /* clear play */
|
|
bit_set(gEmu.playmsg, 57, false); /* clear pause */
|
|
bit_set(gEmu.playmsg, 59, true); /* set stop */
|
|
break;
|
|
}
|
|
|
|
/* convert value to MM:SS */
|
|
time = get_playtime();
|
|
gEmu.time = time; /* copy it */
|
|
gEmu.playmsg[7] = time / (10*60);
|
|
time -= gEmu.playmsg[7] * (10*60);
|
|
gEmu.playmsg[8] = time / 60;
|
|
time -= gEmu.playmsg[8] * 60;
|
|
gEmu.playmsg[9] = time / 10;
|
|
time -= gEmu.playmsg[9] * 10;
|
|
gEmu.playmsg[10] = time;
|
|
}
|
|
else /* FF/FR */
|
|
{
|
|
gEmu.playmsg[2] = gEmu.set_state; /* in FF/FR, report that instead */
|
|
}
|
|
|
|
track = get_track();
|
|
gEmu.playmsg[3] = track / 10;
|
|
gEmu.playmsg[4] = track % 10;
|
|
}
|
|
|
|
/* update the disk status message with Rockbox info */
|
|
void get_diskmsg(void)
|
|
{
|
|
int tracks = rb->playlist_amount();
|
|
if (tracks > 99)
|
|
tracks = 99;
|
|
gEmu.diskmsg[5] = tracks / 10;
|
|
gEmu.diskmsg[6] = tracks % 10;
|
|
}
|
|
|
|
/* return the current track time in seconds */
|
|
int get_playtime(void)
|
|
{
|
|
struct mp3entry* p_mp3entry;
|
|
|
|
p_mp3entry = rb->audio_current_track();
|
|
if (p_mp3entry == NULL)
|
|
return 0;
|
|
|
|
return p_mp3entry->elapsed / 1000;
|
|
}
|
|
|
|
/* return the total length of the current track */
|
|
int get_tracklength(void)
|
|
{
|
|
struct mp3entry* p_mp3entry;
|
|
|
|
p_mp3entry = rb->audio_current_track();
|
|
if (p_mp3entry == NULL)
|
|
return 0;
|
|
|
|
return p_mp3entry->length / 1000;
|
|
}
|
|
|
|
/* change to a new track */
|
|
void set_track(int selected)
|
|
{
|
|
if (selected > get_track())
|
|
{
|
|
print_scroll("audio_next");
|
|
rb->audio_next();
|
|
}
|
|
else if (selected < get_track())
|
|
{
|
|
print_scroll("audio_prev");
|
|
rb->audio_prev();
|
|
}
|
|
}
|
|
|
|
/* return the track number */
|
|
int get_track(void)
|
|
{
|
|
struct mp3entry* p_mp3entry;
|
|
|
|
p_mp3entry = rb->audio_current_track();
|
|
if (p_mp3entry == NULL)
|
|
return 0;
|
|
|
|
return p_mp3entry->index + 1; /* track numbers start with 1 */
|
|
}
|
|
|
|
/* start or resume playback */
|
|
void set_play(void)
|
|
{
|
|
if (rb->audio_status() == AUDIO_STATUS_PLAY)
|
|
return;
|
|
|
|
if (rb->audio_status() == (AUDIO_STATUS_PLAY | AUDIO_STATUS_PAUSE))
|
|
{
|
|
print_scroll("audio_resume");
|
|
rb->audio_resume();
|
|
}
|
|
else
|
|
{
|
|
print_scroll("audio_play(0)");
|
|
rb->audio_play(0);
|
|
}
|
|
}
|
|
|
|
/* pause playback */
|
|
void set_pause(void)
|
|
{
|
|
if (rb->audio_status() == AUDIO_STATUS_PLAY)
|
|
{
|
|
print_scroll("audio_pause");
|
|
rb->audio_pause();
|
|
}
|
|
}
|
|
|
|
/* stop playback */
|
|
void set_stop(void)
|
|
{
|
|
if (rb->audio_status() & AUDIO_STATUS_PLAY)
|
|
{
|
|
print_scroll("audio_stop");
|
|
rb->audio_stop();
|
|
}
|
|
}
|
|
|
|
/* seek */
|
|
void set_position(int seconds)
|
|
{
|
|
if (rb->audio_status() & AUDIO_STATUS_PLAY)
|
|
{
|
|
print_scroll("audio_ff_rewind");
|
|
rb->audio_ff_rewind(seconds * 1000);
|
|
}
|
|
}
|
|
|
|
/****************** main thread + helper ******************/
|
|
|
|
/* set to everything flat and 0 dB volume */
|
|
void sound_neutral(void)
|
|
{ /* neutral sound settings */
|
|
rb->sound_set(SOUND_BASS, 0);
|
|
rb->sound_set(SOUND_TREBLE, 0);
|
|
rb->sound_set(SOUND_BALANCE, 0);
|
|
rb->sound_set(SOUND_VOLUME, 0);
|
|
#if (CONFIG_CODEC == MAS3587F) || (CONFIG_CODEC == MAS3539F)
|
|
rb->sound_set(SOUND_LOUDNESS, 0);
|
|
rb->sound_set(SOUND_SUPERBASS, 0);
|
|
rb->sound_set(SOUND_AVC, 0);
|
|
#endif
|
|
}
|
|
|
|
/* return to user settings */
|
|
void sound_normal(void)
|
|
{ /* restore sound settings */
|
|
rb->sound_set(SOUND_BASS, rb->global_settings->bass);
|
|
rb->sound_set(SOUND_TREBLE, rb->global_settings->treble);
|
|
rb->sound_set(SOUND_BALANCE, rb->global_settings->balance);
|
|
rb->sound_set(SOUND_VOLUME, rb->global_settings->volume);
|
|
#if (CONFIG_CODEC == MAS3587F) || (CONFIG_CODEC == MAS3539F)
|
|
rb->sound_set(SOUND_LOUDNESS, rb->global_settings->loudness);
|
|
rb->sound_set(SOUND_SUPERBASS, rb->global_settings->superbass);
|
|
rb->sound_set(SOUND_AVC, rb->global_settings->avc);
|
|
#endif
|
|
}
|
|
|
|
/* the thread running it all */
|
|
void thread(void)
|
|
{
|
|
int msg_size;
|
|
unsigned char mbus_msg[MBUS_MAX_SIZE];
|
|
char buf[32];
|
|
bool connected = false;
|
|
long last_tick = *rb->current_tick; /* for 1 sec tick */
|
|
|
|
do
|
|
{
|
|
msg_size = mbus_receive(mbus_msg, sizeof(mbus_msg), 1);
|
|
if (msg_size > 0)
|
|
{ /* received something */
|
|
if(gTread.foreground)
|
|
{
|
|
dump_packet(buf, sizeof(buf), mbus_msg, msg_size);
|
|
/*print_scroll(buf); */
|
|
}
|
|
if (msg_size > 2 && mbus_msg[0] == 1
|
|
&& mbus_msg[msg_size-1] == calc_checksum(mbus_msg, msg_size-1))
|
|
{ /* sanity and checksum OK */
|
|
if (!connected)
|
|
{ /* with the first received packet: */
|
|
sound_neutral(); /* set to flat and 0dB volume */
|
|
connected = true;
|
|
}
|
|
emu_process_packet(mbus_msg, msg_size-1); /* pass without chksum */
|
|
}
|
|
else if(gTread.foreground)
|
|
{ /* not OK */
|
|
print_scroll("bad packet");
|
|
}
|
|
}
|
|
else if (msg_size < 0 && gTread.foreground)
|
|
{ /* error */
|
|
rb->snprintf(buf, sizeof(buf), "rcv error %d", msg_size);
|
|
print_scroll(buf);
|
|
}
|
|
|
|
if (*rb->current_tick - last_tick >= gEmu.poll_interval)
|
|
{ /* call the emulation regulary */
|
|
emu_tick();
|
|
last_tick += gEmu.poll_interval;
|
|
}
|
|
|
|
} while (!gTread.exiting);
|
|
}
|
|
|
|
/* callback to end the TSR plugin, called before a new one gets loaded */
|
|
bool exit_tsr(bool reenter)
|
|
{
|
|
if (reenter)
|
|
return false; /* dont let it start again */
|
|
gTread.exiting = true; /* tell the thread to end */
|
|
rb->thread_wait(gTread.thread); /* wait until it did */
|
|
|
|
uart_init(BAUDRATE); /* return to standard baudrate */
|
|
IPRE = (IPRE & ~0xF000); /* UART interrupt off */
|
|
timer_set_mode(TM_OFF); /* timer interrupt off */
|
|
|
|
sound_normal(); /* restore sound settings */
|
|
return true;
|
|
}
|
|
|
|
/****************** main ******************/
|
|
|
|
|
|
int main(const void* parameter)
|
|
{
|
|
(void)parameter;
|
|
#ifdef DEBUG
|
|
int button;
|
|
#endif
|
|
ssize_t stacksize;
|
|
void* stack;
|
|
|
|
mbus_init(); /* init the M-Bus layer */
|
|
emu_init(); /* init emulator */
|
|
|
|
rb->splash(HZ/5, "Alpine CDC"); /* be quick on autostart */
|
|
|
|
#ifdef DEBUG
|
|
print_scroll("Alpine M-Bus Test");
|
|
print_scroll("any key to TSR");
|
|
#endif
|
|
|
|
/* init the worker thread */
|
|
stack = rb->plugin_get_buffer((size_t *)&stacksize); /* use the rest as stack */
|
|
stack = (void*)(((unsigned int)stack + 100) & ~3); /* a bit away, 32 bit align */
|
|
stacksize = (stacksize - 100) & ~3;
|
|
if (stacksize < DEFAULT_STACK_SIZE)
|
|
{
|
|
rb->splash(HZ*2, "Out of memory");
|
|
return -1;
|
|
}
|
|
|
|
rb->memset(&gTread, 0, sizeof(gTread));
|
|
gTread.foreground = true;
|
|
gTread.thread = rb->create_thread(thread, stack, stacksize, 0, "CDC"
|
|
IF_PRIO(, PRIORITY_BACKGROUND)
|
|
IF_COP(, CPU));
|
|
|
|
#ifdef DEBUG
|
|
do
|
|
{
|
|
button = rb->button_get(true);
|
|
} while (button & BUTTON_REL);
|
|
#endif
|
|
|
|
gTread.foreground = false; /* we're in the background now */
|
|
rb->plugin_tsr(exit_tsr); /* stay resident */
|
|
|
|
#ifdef DEBUG
|
|
return rb->default_event_handler(button);
|
|
#else
|
|
return 0;
|
|
#endif
|
|
}
|
|
|
|
|
|
/***************** Plugin Entry Point *****************/
|
|
|
|
|
|
enum plugin_status plugin_start(const void* parameter)
|
|
{
|
|
/* now go ahead and have fun! */
|
|
return (main(parameter)==0) ? PLUGIN_OK : PLUGIN_ERROR;
|
|
}
|
|
|
|
#endif /* CONFIG_CPU==SH7034 && !(CONFIG_STORAGE & STORAGE_MMC) */
|