rockbox/firmware/drivers
2007-07-22 21:02:24 +00:00
..
audio Changes bass setting to use adaptive bass instead of linear bass. The datasheet recommends it and it should stop clipping on bass. 2007-07-13 04:18:31 +00:00
rtc Basic gigabeat buttonlight support outside of debug menu FS#7112. Also disables USB PLL and the USB device clock (uneeded to connect to computer) - May offer some power savings. Changed how some pins are initialized. 2007-05-07 19:34:34 +00:00
tuner Remove a change that wasn't supposed to stick around. 2007-07-14 22:08:20 +00:00
arcotg_udc.c No functional changes, just reorganising code: 2007-02-16 22:13:21 +00:00
ata.c ATA driver: * Support for drives with large physical sectors and no support for partial access in the firmware (i.e. Toshiba MK8010GAH - iPod G5.5/80GB). Sequential writes with a single 512-byte buffer to that disk are really slow, so this is an intermediate solution that allows to adjust the FAT driver and the file system gradually. * Assume multisectors = 16 if the value reported by the drive is invalid (also MK8010GAH). 2007-05-23 17:51:18 +00:00
ata_flash.c Moved SH1 system code to target tree. * First shot at hwcompat cleanup. 2007-04-11 23:51:00 +00:00
ata_mmc.c Accept FS#7134 - Sansa: external sd card support by Antonius Hellmann with some tweaks. All testers have given the green light. (Now for the RED ?? ;). 2007-06-30 02:08:27 +00:00
button.c Wheel acceleration for e200. A general acceleration interface intended for use on any scroll target and by any code. A general interface to obtain data associated with most recently dequeued button presses and actions. Use #define HAVE_SCROLLWHEEL and set appropriate constants, values in the scroller driver that feel right. 2007-07-22 21:02:24 +00:00
dac.c Patch #798050 by Leslie Donaldson, activates Line In on Player models 2003-11-03 23:36:36 +00:00
dac.h Patch #798050 by Leslie Donaldson, activates Line In on Player models 2003-11-03 23:36:36 +00:00
eeprom_24cxx.c FS#6419 - driver for H1x0 series RTC Mod with runtime detection 2007-02-28 13:20:36 +00:00
fat.c Prevent another divide-by-zero (only affecting targets with FAT16 support enabled, such as the Sansa). 2007-07-09 22:58:08 +00:00
fmradio.c Fix remaining CONFIG_TUNER checks. 2007-02-18 08:46:12 +00:00
fmradio_i2c.c Forget all the nonsense with C delay loops. 'volatile' on the variable makes bloated code and a volatile, blank asm block inside may or may not be optimized out. Use asm delay loops instead for Coldfire. Radio i2c driver also needs NACK after reading last tuner byte. Get the volatile off the Ondio loops (not needed here now). Maybe this is straightened out now. 2007-06-27 03:11:49 +00:00
generic_i2c.c Removed executable flag 2007-01-09 23:29:07 +00:00
i2c.c Removed the Gmini 120 and Gmini SP code. These ports are dead, unfortunately. 2006-11-10 20:26:01 +00:00
isp1362.c Removed executable flag 2007-01-09 23:29:07 +00:00
lcd-1bit-vert.c Moved SH1 system code to target tree. * First shot at hwcompat cleanup. 2007-04-11 23:51:00 +00:00
lcd-2bit-horz.c for WPS files with many lines the current wps code will call puts_scroll with y-values greater than the size of the scroll[] array (e.g. gwps-common.c:2063). This is a temporary security measure until viewports and/or wps tokenizer are available... 2007-04-01 17:28:46 +00:00
lcd-2bit-vert.c for WPS files with many lines the current wps code will call puts_scroll with y-values greater than the size of the scroll[] array (e.g. gwps-common.c:2063). This is a temporary security measure until viewports and/or wps tokenizer are available... 2007-04-01 17:28:46 +00:00
lcd-16bit.c Hrm. Commit the other needed change too. :) 2007-07-15 01:16:15 +00:00
lcd-charcell.c Now charcell displays require lcd_update() for updating the main lcd content like bitmap displays. 2007-04-06 22:55:00 +00:00
lcd-charset-player.c Player: Fix the dollar sign for old LCD. 2007-04-21 05:32:11 +00:00
lcd-remote-1bit-v.c for WPS files with many lines the current wps code will call puts_scroll with y-values greater than the size of the scroll[] array (e.g. gwps-common.c:2063). This is a temporary security measure until viewports and/or wps tokenizer are available... 2007-04-01 17:28:46 +00:00
lcd-remote-2bit-vi.c for WPS files with many lines the current wps code will call puts_scroll with y-values greater than the size of the scroll[] array (e.g. gwps-common.c:2063). This is a temporary security measure until viewports and/or wps tokenizer are available... 2007-04-01 17:28:46 +00:00
led.c Do the CONFIG_LED define 2007-02-18 05:07:19 +00:00
m5636.c Removed executable flag 2007-01-09 23:29:07 +00:00
mas.c Moved SH1 system code to target tree. * First shot at hwcompat cleanup. 2007-04-11 23:51:00 +00:00
pcf50605.c Add wake on alarm support for Ipods. Rename HAVE_ALARM_MOD to HAVE_ALARM_RTC since it's not always a mod. Make Ipod PCF driver keep other flags in OOCC1 that have been set instead of overwriting them. 2007-02-28 21:55:11 +00:00
power.c Do some planned radio interface cleanup since adding in the LV24020LP. 2007-07-14 11:20:31 +00:00
serial.c Moved archos button reading to target tree. * Cleanup of button.[ch]. * Deactivated serial remote code for recorder FM/V2 as there is no remote pin, saving ~500 bytes of code. 2006-11-27 02:16:32 +00:00