Aidan MacDonald d93e054419 fiiom3k: power down amp before switching DAC power modes ... As detailed in the <Low Power Mode> section of the AK4376A datasheet, the amp should be powered down before switching power modes (or to a sample rate <= 12 KHz). Change-Id: I3ab0a21c78a3ad2bb418b64c916f7dbe2a843efa		2022-01-16 19:35:40 -05:00
..
aic3x.c	Sansa Connect: Properly setup internal speaker	2021-06-14 12:48:16 +00:00
ak4376.c	fiiom3k: power down amp before switching DAC power modes	2022-01-16 19:35:40 -05:00
ak4537.c
android.c
as3514.c
audiohw-swcodec.c
cs42l55.c
cs4398.c	Add cleaned-up xDuoo X3 support	2018-07-28 10:56:31 -04:00
dac3550a.c
df1704.c
dummy_codec.c
eros_qn_codec.c	Eros Q Native: Make Mute logic channel-independent	2021-08-10 18:15:53 -05:00
erosqlinux_codec.c	erosq: Tweak volume scale to be approximately correct	2021-04-17 12:09:19 +00:00
es9018.c	Add Xuelin iHIFI 770/770C/800 support	2019-01-02 08:10:01 -05:00
es9218.c	New port: Shanling Q1 native	2021-07-13 22:01:33 +01:00
fiiolinux_codec.c	hosted: Don't open alsa control device directly	2021-04-14 01:39:57 +00:00
imx233-codec.c
nwzlinux-codec.c	nwz/alsa: various improvements	2020-10-31 14:16:31 +00:00
pcm1792.c
rk27xx_codec.c
rocker_codec.c	hosted: Don't open alsa control device directly	2021-04-14 01:39:57 +00:00
sdl.c	Add new audiohw capability: POWER_MODE_CAP	2021-03-22 13:00:11 +00:00
tlv320.c
tsc2100.c
uda1341.c
uda1380.c	coldfire: Allow building when 88KHz audio is disabled	2020-10-03 15:57:38 -04:00
wm8731.c
wm8740.c	Add Xuelin iHIFI 770/770C/800 support	2019-01-02 08:10:01 -05:00
wm8751.c
wm8758.c
wm8975.c	wm8975: document audiohw settings	2016-12-12 13:13:13 +01:00
wm8978.c
wm8985.c
x1000-codec.c	x1000: internal codec audio driver	2022-01-16 19:17:25 -05:00
xduoolinux_codec.c	xduoox3ii: Add "Super Slow" filter roll-off	2021-07-17 08:18:31 -04:00