86ff093267
Currently don't do anything on stmp3600 because emi is completely different. On stmp3700 it is unsure how the pll lock is handled and this will need more testing. Change-Id: I3d11282531f54f2ecc4187c0d913e2c61f4de14d
199 lines
7.6 KiB
C
199 lines
7.6 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Copyright (C) 2013 by Amaury Pouly
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
#include "emi-imx233.h"
|
|
#include "clkctrl-imx233.h"
|
|
|
|
struct emi_reg_t
|
|
{
|
|
int index;
|
|
uint32_t value;
|
|
};
|
|
|
|
/* hardcode all the register values for the different settings. This is ugly
|
|
* but I don't understand what they mean and it's faster this way so...
|
|
* Recall that everything should be put in iram !
|
|
* Make sure the last value is written to register 40. */
|
|
|
|
/* Values extracted from Sigmatel linux port (GPL) */
|
|
|
|
/** mDDR value */
|
|
static struct emi_reg_t settings_24M[15] ICONST_ATTR =
|
|
{
|
|
{4, 0x01000101}, {7, 0x01000101}, {12, 0x02010002}, {13, 0x06060a02},
|
|
{15, 0x01030000}, {17, 0x2d000102}, {18, 0x20200000}, {19, 0x027f1414},
|
|
{20, 0x01021608}, {21, 0x00000002}, {26, 0x000000b3}, {32, 0x00030687},
|
|
{33, 0x00000003}, {34, 0x000012c1}, {40, 0x00010000}
|
|
};
|
|
|
|
static struct emi_reg_t settings_48M[15] ICONST_ATTR =
|
|
{
|
|
{4, 0x01000101}, {7, 0x01000101}, {13, 0x06060a02}, {12, 0x02010002},
|
|
{15, 0x02040000}, {17, 0x2d000104}, {18, 0x1f1f0000}, {19, 0x027f0a0a},
|
|
{20, 0x01021608}, {21, 0x00000004}, {26, 0x0000016f}, {32, 0x00060d17},
|
|
{33, 0x00000006}, {34, 0x00002582}, {40, 0x00020000}
|
|
};
|
|
|
|
static struct emi_reg_t settings_60M[15] ICONST_ATTR =
|
|
{
|
|
{4, 0x01000101}, {7, 0x01000101}, {12, 0x02020002}, {13, 0x06060a02},
|
|
{15, 0x02040000}, {17, 0x2d000005}, {18, 0x1f1f0000}, {19, 0x027f0a0a},
|
|
{20, 0x02040a10}, {21, 0x00000006}, {26, 0x000001cc}, {32, 0x00081060},
|
|
{33, 0x00000008}, {34, 0x00002ee5}, {40, 0x00020000}
|
|
};
|
|
|
|
static struct emi_reg_t settings_80M[15] ICONST_ATTR __attribute__((alias("settings_60M")));
|
|
|
|
static struct emi_reg_t settings_96M[15] ICONST_ATTR =
|
|
{
|
|
{4, 0x00000101}, {7, 0x01000001}, {12, 0x02020002}, {13, 0x06070a02},
|
|
{15, 0x03050000}, {17, 0x2d000808}, {18, 0x1f1f0000}, {19, 0x020c1010},
|
|
{20, 0x0305101c}, {21, 0x00000007}, {26, 0x000002e6}, {32, 0x000c1a3b},
|
|
{33, 0x0000000c}, {34, 0x00004b0d}, {40, 0x00030000}
|
|
};
|
|
|
|
static struct emi_reg_t settings_120M[15] ICONST_ATTR =
|
|
{
|
|
{4, 0x00000101}, {7, 0x01000001}, {12, 0x02020002}, {13, 0x06070a02},
|
|
{15, 0x03050000}, {17, 0x2300080a}, {18, 0x1f1f0000}, {19, 0x020c1010},
|
|
{20, 0x0306101c}, {21, 0x00000009}, {26, 0x000003a1}, {32, 0x000f20ca},
|
|
{33, 0x0000000f}, {34, 0x00005dca}, {40, 0x00040000}
|
|
};
|
|
|
|
static struct emi_reg_t settings_133M[15] ICONST_ATTR =
|
|
{
|
|
{4, 0x00000101}, {7, 0x01000001}, {12, 0x02020002}, {13, 0x06070a02},
|
|
{15, 0x03050000}, {17, 0x2000080a}, {18, 0x1f1f0000}, {19, 0x020c1010},
|
|
{20, 0x0306101c}, {21, 0x0000000a}, {26, 0x00000408}, {32, 0x0010245f},
|
|
{33, 0x00000010}, {34, 0x00006808}, {40, 0x00040000}
|
|
};
|
|
|
|
static struct emi_reg_t settings_155M[15] ICONST_ATTR __attribute__((alias("settings_133M")));
|
|
|
|
static void set_frequency(unsigned long freq) ICODE_ATTR;
|
|
|
|
#if IMX233_SUBTARGET >= 3700
|
|
static void set_frequency(unsigned long freq)
|
|
{
|
|
/** WARNING all restriction of imx233_emi_set_frequency apply here !! */
|
|
/* Set divider and clear clkgate. */
|
|
unsigned fracdiv;
|
|
unsigned div;
|
|
switch(freq)
|
|
{
|
|
case IMX233_EMIFREQ_151_MHz:
|
|
/* clk_emi@ref_emi/3*18/19 */
|
|
fracdiv = 19;
|
|
div = 3;
|
|
/* ref_emi@480 MHz
|
|
* clk_emi@151.58 MHz */
|
|
break;
|
|
case IMX233_EMIFREQ_130_MHz:
|
|
/* clk_emi@ref_emi/2*18/33 */
|
|
fracdiv = 33;
|
|
div = 2;
|
|
/* ref_emi@480 MHz
|
|
* clk_emi@130.91 MHz */
|
|
break;
|
|
case IMX233_EMIFREQ_64_MHz:
|
|
default:
|
|
/* clk_emi@ref_emi/5*18/27 */
|
|
fracdiv = 27;
|
|
div = 5;
|
|
/* ref_emi@480 MHz
|
|
* clk_emi@64 MHz */
|
|
break;
|
|
}
|
|
BF_WR(CLKCTRL_FRAC, EMIFRAC, fracdiv);
|
|
BF_WR(CLKCTRL_EMI, DIV_EMI, div);
|
|
}
|
|
|
|
void imx233_emi_set_frequency(unsigned long freq) ICODE_ATTR;
|
|
|
|
void imx233_emi_set_frequency(unsigned long freq)
|
|
{
|
|
/** FIXME we rely on the compiler to NOT use the stack here because it's
|
|
* not in iram ! If it's not smart enough, one can switch the switch to use
|
|
* the irq stack since we are running interrupts disable here ! */
|
|
/** BUG for freq<=24 MHz we must keep bypass mode since we run on xtal
|
|
* since this setting is unused by our code so ignore this bug for now */
|
|
/** WARNING DANGER
|
|
* Changing the EMI frequency is complicated because it requires to
|
|
* completely shutdown the external memory interface. We must make sure
|
|
* that this code and all the data it uses in in iram and that no access to
|
|
* the sdram will be made during the change. Care must be taken w.r.t to
|
|
* the cache also. */
|
|
/** FIXME assume that auto-slow is disabled here since that could put some
|
|
* clock below the minimum value and we want to spend as least time as
|
|
* possible in this state anyway.
|
|
* WARNING DANGER don't call any external function when sdram is disabled
|
|
* otherwise you'll poke sdram and trigger a fatal data abort ! */
|
|
|
|
/* first disable all interrupts */
|
|
int oldstatus = disable_interrupt_save(IRQ_FIQ_STATUS);
|
|
/* flush the cache */
|
|
commit_discard_idcache();
|
|
/* put DRAM into self-refresh mode */
|
|
HW_DRAM_CTL08 |= BM_DRAM_CTL08_SREFRESH;
|
|
/* wait for DRAM to be halted */
|
|
while(!BF_RD(EMI_STAT, DRAM_HALTED));
|
|
/* load timings */
|
|
struct emi_reg_t *regs;
|
|
if(freq <= 24000) regs = settings_24M;
|
|
else if(freq <= 48000) regs = settings_48M;
|
|
else if(freq <= 60000) regs = settings_60M;
|
|
else if(freq <= 80000) regs = settings_80M;
|
|
else if(freq <= 96000) regs = settings_96M;
|
|
else if(freq <= 120000) regs = settings_120M;
|
|
else if(freq <= 133000) regs = settings_133M;
|
|
else regs = settings_155M;
|
|
|
|
do
|
|
HW_DRAM_CTLxx(regs->index) = regs->value;
|
|
while((regs++)->index != 40);
|
|
/* switch emi to xtal */
|
|
BF_SET(CLKCTRL_CLKSEQ, BYPASS_EMI);
|
|
/* wait for transition */
|
|
while(BF_RD(CLKCTRL_EMI, BUSY_REF_XTAL));
|
|
/* put emi dll into reset mode */
|
|
// FIXME Unsure about what to do for stmp37xx
|
|
#if IMX233_SUBTARGET >= 3780
|
|
HW_EMI_CTRL_SET = BM_EMI_CTRL_DLL_RESET | BM_EMI_CTRL_DLL_SHIFT_RESET;
|
|
#endif
|
|
/* load the new frequency dividers */
|
|
set_frequency(freq);
|
|
/* switch emi back to pll */
|
|
BF_CLR(CLKCTRL_CLKSEQ, BYPASS_EMI);
|
|
/* wait for transition */
|
|
while(BF_RD(CLKCTRL_EMI, BUSY_REF_EMI));
|
|
/* allow emi dll to lock again */
|
|
#if IMX233_SUBTARGET >= 3780
|
|
HW_EMI_CTRL_CLR = BM_EMI_CTRL_DLL_RESET | BM_EMI_CTRL_DLL_SHIFT_RESET;
|
|
#endif
|
|
/* wait for lock */
|
|
while(!BF_RD(DRAM_CTL04, DLLLOCKREG));
|
|
/* get DRAM out of self-refresh mode */
|
|
HW_DRAM_CTL08 &= ~BM_DRAM_CTL08_SREFRESH;
|
|
/* wait for DRAM to be to run again */
|
|
while(HW_EMI_STAT & BM_EMI_STAT_DRAM_HALTED);
|
|
|
|
restore_interrupt(oldstatus);
|
|
}
|
|
#endif
|