Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware/target/arm
History
Christian Gmeiner 868fcce96c Shutdown needs about 2 seconds, but it seems to work :) 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16317 a1c6a512-1295-4272-9138-f99709370657
2008-02-16 12:44:15 +00:00
..
archos/av300 Moved archos power handling into target tree. * Tuner power handling cleaned up a bit. 2007-08-14 22:06:23 +00:00
imx31 Oops. Tiny goof. 2008-02-09 08:05:01 +00:00
ipod Revert LCD changes - make sure the backlight remains on as a visible sign that the unit has powered off 2008-02-14 20:48:17 +00:00
iriver H10-20GB: Commit the first patch in FS#8533 to fix the mpegplayer display problem where only half the data was reaching the display on some players. Two individuals report that it corrects it. 2008-02-01 02:02:38 +00:00
olympus/mrobe-100 mrobe 100: (1) device reset in system_init is same as H10. (2) make power_off actually work. 2008-02-03 00:04:02 +00:00
pnx0101 Hardware controlled backlight brightness for iPod Video and Nano, retaining the software PWM fade in/ fade out. * Backlight handling cleanup, getting rid of one layer of 'lowlevelness'. * Use atomic GPIO bit manipulation for PP502x backlight handling. 2007-11-12 18:49:53 +00:00
s3c2440 Fix the red. 2008-02-13 05:49:48 +00:00
sandisk Some misc. ATA stuff: Increase threads' priority (important for idle callbacks to get done faster). Use a simpler loop for ata thread. Add a balancing mutex_lock call to ata_init (oops). 2008-02-11 07:42:11 +00:00
tatung/tpj1022 Hardware controlled backlight brightness for iPod Video and Nano, retaining the software PWM fade in/ fade out. * Backlight handling cleanup, getting rid of one layer of 'lowlevelness'. * Use atomic GPIO bit manipulation for PP502x backlight handling. 2007-11-12 18:49:53 +00:00
tcc77x Hardware controlled backlight brightness for iPod Video and Nano, retaining the software PWM fade in/ fade out. * Backlight handling cleanup, getting rid of one layer of 'lowlevelness'. * Use atomic GPIO bit manipulation for PP502x backlight handling. 2007-11-12 18:49:53 +00:00
tcc780x Shutdown needs about 2 seconds, but it seems to work :) 2008-02-16 12:44:15 +00:00
tms320dm320 Finally, out goes struct spinlock for anything but mutiprocessor targets where it becomes a reenterable corelock. 2008-01-18 13:12:33 +00:00
adc-pp5020.c make mrobe100 work again 2008-02-10 16:06:01 +00:00
ata-as-arm.S
ata-pp5002.c
ata-pp5020.c Restore a line accidentally removed by r15705 2007-11-20 07:52:37 +00:00
ata-target.h
audio-pp.c Hopefully fix line-in recording on PortalPlayer targets (H10 in particular). 2007-11-11 23:41:54 +00:00
crt0-pp-bl.S Enable dualcore for the pp5002 processor by adding the needed cache handling and sleep/wakeup sync to the kernel. Refine some handling of fw/bl startup for all. 2007-11-27 01:20:26 +00:00
crt0-pp.S Enable dualcore for the pp5002 processor by adding the needed cache handling and sleep/wakeup sync to the kernel. Refine some handling of fw/bl startup for all. 2007-11-27 01:20:26 +00:00
i2c-pp.c Portal player i2c driver: More struct spinlock phaseout. 2007-11-12 07:58:54 +00:00
i2c-telechips.c Initial Cowon D2 commit: 2008-01-14 22:04:48 +00:00
i2s-pp.c Finish the conversion to packed i2s for PP502x. Karl Kurbjun-approved for Mini-1G. Simplify the pcm format selection #ifdefs. 2007-10-16 04:19:18 +00:00
lcd-as-memframe.S More M:Robe work including a fix to lcd-as-memframe for larger screens thanks to Michael Sevakis. Also fixes simulator builds. 2007-10-21 23:12:17 +00:00
memcpy-arm.S
memmove-arm.S
memset-arm.S
memset16-arm.S
mmu-arm.c Unify the Gigabeat F/X and M:Robe MMU code while enabling it for the M:Robe 2007-10-23 03:29:15 +00:00
mmu-arm.h Unify the Gigabeat F/X and M:Robe MMU code while enabling it for the M:Robe 2007-10-23 03:29:15 +00:00
pcm-pp.c audio on the m:robe 100 2008-01-20 12:59:23 +00:00
system-arm.h Unify PCM interface just above the hardware driver level for all targets including the sims. Perform lockout of audio callback when changing states. Weird new playback or recording trouble? Check before and after this revision first though things seem quite sound. 2007-10-06 22:27:27 +00:00
system-pp502x.c Commit FS#8379 by Andree Buschmann. Disables much of the remaining unneeded hardware on PP50xx targets (Ipods, Sansa, H10s, etc) resulting in a large savings in power and consequent increase in battery life. Results vary from target to target and from codec to codec, but we now approach the OF runtime on several PP devices. For now, leave base CPU clock at 30MHz, although further savings is possible with some codecs if clock is reduced. Additionally, fix battery capacity on c200 and use my measurements to improve runtime estimation for Sandisk targets. 2008-02-10 05:39:20 +00:00
system-pp5002.c Enable dualcore for the pp5002 processor by adding the needed cache handling and sleep/wakeup sync to the kernel. Refine some handling of fw/bl startup for all. 2007-11-27 01:20:26 +00:00
system-target.h Enable dualcore for the pp5002 processor by adding the needed cache handling and sleep/wakeup sync to the kernel. Refine some handling of fw/bl startup for all. 2007-11-27 01:20:26 +00:00
usb-drv-pp502x.c Major USB fixes by Frank Gevaerts. Still disabled in builds, #define USE_ROCKBOX_USB to test. 2008-02-11 14:26:25 +00:00
usb-fw-pp502x.c Major USB fixes by Frank Gevaerts. Still disabled in builds, #define USE_ROCKBOX_USB to test. 2008-02-11 14:26:25 +00:00
usb-fw-pp5002.c FS #7691 - improved USB detection on PP devices. This patch modifies the target-tree function usb_detect() on all targets from bool to int, returning USB_INSERTED or USB_EXTRACTED instead of true or false. This was done to enable the PP usb_detect() to check for USB_POWER (either a connection to a USB wall charger, or the user holding "charge mode" button) and return that as a third value. 2007-09-04 08:03:07 +00:00
usb-target.h
wmcodec-pp.c Commit FS#8379 by Andree Buschmann. Disables much of the remaining unneeded hardware on PP50xx targets (Ipods, Sansa, H10s, etc) resulting in a large savings in power and consequent increase in battery life. Results vary from target to target and from codec to codec, but we now approach the OF runtime on several PP devices. For now, leave base CPU clock at 30MHz, although further savings is possible with some codecs if clock is reduced. Additionally, fix battery capacity on c200 and use my measurements to improve runtime estimation for Sandisk targets. 2008-02-10 05:39:20 +00:00
wmcodec-telechips.c Initial Cowon D2 commit: 2008-01-14 22:04:48 +00:00