160 lines
6.2 KiB
C
160 lines
6.2 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Copyright (C) 2011 by Amaury Pouly
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
|
|
#include "powermgmt.h"
|
|
#include "power-imx233.h"
|
|
#include "usb.h"
|
|
#include "string.h"
|
|
//#define LOGF_ENABLE
|
|
#include "logf.h"
|
|
|
|
#if !defined(IMX233_CHARGE_CURRENT) || !defined(IMX233_STOP_CURRENT) \
|
|
|| !defined(IMX233_CHARGING_TIMEOUT) || !defined(IMX233_TOPOFF_TIMEOUT)
|
|
#error You must define IMX233_CHARGE_CURRENT, IMX233_STOP_CURRENT, \
|
|
IMX233_CHARGING_TIMEOUT and IMX233_TOPOFF_TIMEOUT !
|
|
#endif
|
|
|
|
/* charger state is maintained in charge_state (see powermgmt.h) */
|
|
static int timeout_charging; /* timeout before charging will be declared broken */
|
|
static int timeout_topping_off; /* timeout before stopping charging after topping off */
|
|
static int timeout_4p2_ilimit_increase; /* timeout before increasing 4p2 ilimit */
|
|
|
|
/* Returns battery voltage from ADC [millivolts] */
|
|
int _battery_voltage(void)
|
|
{
|
|
/* battery value is in 8mV LSB */
|
|
return BF_RD(POWER_BATTMONITOR, BATT_VAL) * 8;
|
|
}
|
|
|
|
void powermgmt_init_target(void)
|
|
{
|
|
imx233_power_set_charge_current(IMX233_CHARGE_CURRENT);
|
|
imx233_power_set_stop_current(IMX233_STOP_CURRENT);
|
|
/* assume that adc_init was called and battery monitoring via LRADC setup */
|
|
BF_WR(POWER_BATTMONITOR, EN_BATADJ, 1);
|
|
/* make sure we are in a known state: disable charger and 4p2 */
|
|
BF_SET(POWER_CHARGE, PWD_BATTCHRG);
|
|
BF_WR(POWER_DCDC4P2, ENABLE_DCDC, 0);
|
|
BF_WR(POWER_DCDC4P2, ENABLE_4P2, 0);
|
|
BF_SET(POWER_5VCTRL, PWD_CHARGE_4P2);
|
|
charge_state = DISCHARGING;
|
|
}
|
|
|
|
void charging_algorithm_step(void)
|
|
{
|
|
bool is_5v_present = usb_detect() == USB_INSERTED;
|
|
|
|
/* initial state & 5v -> battery transition */
|
|
if(!is_5v_present && charge_state != DISCHARGING)
|
|
{
|
|
logf("pwrmgmt: * -> discharging");
|
|
logf("pwrmgmt: disable charger and 4p2");
|
|
/* 5V has been lost: disable 4p2 power rail */
|
|
BF_SET(POWER_CHARGE, PWD_BATTCHRG);
|
|
BF_WR(POWER_DCDC4P2, ENABLE_DCDC, 0);
|
|
BF_WR(POWER_DCDC4P2, ENABLE_4P2, 0);
|
|
BF_SET(POWER_5VCTRL, PWD_CHARGE_4P2);
|
|
charge_state = DISCHARGING;
|
|
}
|
|
/* battery -> 5v transition */
|
|
else if(is_5v_present && charge_state == DISCHARGING)
|
|
{
|
|
logf("pwrmgmt: discharging -> trickle");
|
|
logf("pwrmgmt: begin charging 4p2");
|
|
/* 5V has been detected: prepare 4.2V power rail for activation */
|
|
BF_WR(POWER_DCDC4P2, ENABLE_4P2, 1);
|
|
BF_SET(POWER_CHARGE, ENABLE_LOAD);
|
|
BF_WR(POWER_5VCTRL, CHARGE_4P2_ILIMIT, 1);
|
|
BF_CLR(POWER_5VCTRL, PWD_CHARGE_4P2);// FIXME: manual error ?
|
|
BF_WR(POWER_DCDC4P2, ENABLE_DCDC, 1);
|
|
timeout_4p2_ilimit_increase = current_tick + HZ / 100;
|
|
charge_state = TRICKLE;
|
|
}
|
|
else if(charge_state == TRICKLE && TIME_AFTER(current_tick, timeout_4p2_ilimit_increase))
|
|
{
|
|
/* if 4.2V current limit has not reached 780mA, increase it slowly to
|
|
* charge the 4.2V capacitance */
|
|
if(BF_RD(POWER_5VCTRL, CHARGE_4P2_ILIMIT) != 0x3f)
|
|
{
|
|
//logf("pwrmgmt: incr 4.2 ilimit");
|
|
HW_POWER_5VCTRL += BF_POWER_5VCTRL_CHARGE_4P2_ILIMIT(1);
|
|
timeout_4p2_ilimit_increase = current_tick + HZ / 100;
|
|
}
|
|
/* we've reached the maximum, take action */
|
|
else
|
|
{
|
|
logf("pwrmgmt: enable dcdc and charger");
|
|
logf("pwrmgmt: trickle -> charging");
|
|
/* adjust arbitration between 4.2 and battery */
|
|
BF_WR(POWER_DCDC4P2, CMPTRIP, 0); /* 85% */
|
|
BF_WR(POWER_DCDC4P2, DROPOUT_CTRL, 0xe); /* select greater, 200 mV drop */
|
|
BF_CLR(POWER_5VCTRL, DCDC_XFER);
|
|
BF_SET(POWER_5VCTRL, ENABLE_DCDC);
|
|
/* enable battery charging */
|
|
BF_CLR(POWER_CHARGE, PWD_BATTCHRG);
|
|
charge_state = CHARGING;
|
|
timeout_charging = current_tick + IMX233_CHARGING_TIMEOUT;
|
|
}
|
|
}
|
|
else if(charge_state == CHARGING && TIME_AFTER(current_tick, timeout_charging))
|
|
{
|
|
/* we have charged for a too long time, declare charger broken */
|
|
logf("pwrmgmt: charging timeout exceeded!");
|
|
logf("pwrmgmt: charging -> error");
|
|
/* stop charging */
|
|
BF_SET(POWER_5VCTRL, PWD_CHARGE_4P2);
|
|
/* goto error state */
|
|
charge_state = CHARGE_STATE_ERROR;
|
|
}
|
|
else if(charge_state == CHARGING && !BF_RD(POWER_STS, CHRGSTS))
|
|
{
|
|
logf("pwrmgmt: topping off");
|
|
logf("pwrmgmt: charging -> topoff");
|
|
charge_state = TOPOFF;
|
|
timeout_topping_off = current_tick + IMX233_TOPOFF_TIMEOUT;
|
|
}
|
|
else if(charge_state == TOPOFF && TIME_AFTER(current_tick, timeout_topping_off))
|
|
{
|
|
logf("pwrmgmt: charging finished");
|
|
logf("pwrmgmt: topoff -> disabled");
|
|
/* stop charging */
|
|
BF_SET(POWER_CHARGE, PWD_BATTCHRG);
|
|
charge_state = CHARGE_STATE_DISABLED;
|
|
}
|
|
}
|
|
|
|
void charging_algorithm_close(void)
|
|
{
|
|
}
|
|
|
|
struct imx233_powermgmt_info_t imx233_powermgmt_get_info(void)
|
|
{
|
|
struct imx233_powermgmt_info_t info;
|
|
memset(&info, 0, sizeof(info));
|
|
info.state = charge_state;
|
|
info.charging_timeout =
|
|
charge_state == CHARGING ? timeout_charging - current_tick : 0;
|
|
info.topoff_timeout =
|
|
charge_state == TOPOFF ? timeout_topping_off - current_tick : 0;
|
|
info.incr_4p2_ilimit_timeout =
|
|
charge_state == TRICKLE ? timeout_4p2_ilimit_increase - current_tick : 0;
|
|
return info;
|
|
}
|